From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>,
Michael Walle <michael@walle.cc>, Mark Brown <broonie@kernel.org>,
Sasha Levin <sashal@kernel.org>,
linux-spi@vger.kernel.org
Subject: [PATCH AUTOSEL 5.4 39/46] spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion
Date: Thu, 9 Apr 2020 23:49:02 -0400 [thread overview]
Message-ID: <20200410034909.8922-39-sashal@kernel.org> (raw)
In-Reply-To: <20200410034909.8922-1-sashal@kernel.org>
From: Vladimir Oltean <vladimir.oltean@nxp.com>
[ Upstream commit 4f5ee75ea1718a09149460b3df993f389a67b56a ]
Currently the driver puts the process in interruptible sleep waiting for
the interrupt train to finish transfer to/from the tx_buf and rx_buf.
But exiting the process with ctrl-c may make the kernel panic: the
wait_event_interruptible call will return -ERESTARTSYS, which a proper
driver implementation is perhaps supposed to handle, but nonetheless
this one doesn't, and aborts the transfer altogether.
Actually when the task is interrupted, there is still a high chance that
the dspi_interrupt is still triggering. And if dspi_transfer_one_message
returns execution all the way to the spi_device driver, that can free
the spi_message and spi_transfer structures, leaving the interrupts to
access a freed tx_buf and rx_buf.
hexdump -C /dev/mtd0
00000000 00 75 68 75 0a ff ff ff ff ff ff ff ff ff ff ff
|.uhu............|
00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
|................|
*
^C[ 38.495955] fsl-dspi 2120000.spi: Waiting for transfer to complete failed!
[ 38.503097] spi_master spi2: failed to transfer one message from queue
[ 38.509729] Unable to handle kernel paging request at virtual address ffff800095ab3377
[ 38.517676] Mem abort info:
[ 38.520474] ESR = 0x96000045
[ 38.523533] EC = 0x25: DABT (current EL), IL = 32 bits
[ 38.528861] SET = 0, FnV = 0
[ 38.531921] EA = 0, S1PTW = 0
[ 38.535067] Data abort info:
[ 38.537952] ISV = 0, ISS = 0x00000045
[ 38.541797] CM = 0, WnR = 1
[ 38.544771] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000082621000
[ 38.551494] [ffff800095ab3377] pgd=00000020fffff003, p4d=00000020fffff003, pud=0000000000000000
[ 38.560229] Internal error: Oops: 96000045 [#1] PREEMPT SMP
[ 38.565819] Modules linked in:
[ 38.568882] CPU: 0 PID: 2729 Comm: hexdump Not tainted 5.6.0-rc4-next-20200306-00052-gd8730cdc8a0b-dirty #193
[ 38.578834] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT)
[ 38.587129] pstate: 20000085 (nzCv daIf -PAN -UAO)
[ 38.591941] pc : ktime_get_real_ts64+0x3c/0x110
[ 38.596487] lr : spi_take_timestamp_pre+0x40/0x90
[ 38.601203] sp : ffff800010003d90
[ 38.604525] x29: ffff800010003d90 x28: ffff80001200e000
[ 38.609854] x27: ffff800011da9000 x26: ffff002079c40400
[ 38.615184] x25: ffff8000117fe018 x24: ffff800011daa1a0
[ 38.620513] x23: ffff800015ab3860 x22: ffff800095ab3377
[ 38.625841] x21: 000000000000146e x20: ffff8000120c3000
[ 38.631170] x19: ffff0020795f6e80 x18: ffff800011da9948
[ 38.636498] x17: 0000000000000000 x16: 0000000000000000
[ 38.641826] x15: ffff800095ab3377 x14: 0720072007200720
[ 38.647155] x13: 0720072007200765 x12: 0775076507750771
[ 38.652483] x11: 0720076d076f0772 x10: 0000000000000040
[ 38.657812] x9 : ffff8000108e2100 x8 : ffff800011dcabe8
[ 38.663139] x7 : 0000000000000000 x6 : ffff800015ab3a60
[ 38.668468] x5 : 0000000007200720 x4 : ffff800095ab3377
[ 38.673796] x3 : 0000000000000000 x2 : 0000000000000ab0
[ 38.679125] x1 : ffff800011daa000 x0 : 0000000000000026
[ 38.684454] Call trace:
[ 38.686905] ktime_get_real_ts64+0x3c/0x110
[ 38.691100] spi_take_timestamp_pre+0x40/0x90
[ 38.695470] dspi_fifo_write+0x58/0x2c0
[ 38.699315] dspi_interrupt+0xbc/0xd0
[ 38.702987] __handle_irq_event_percpu+0x78/0x2c0
[ 38.707706] handle_irq_event_percpu+0x3c/0x90
[ 38.712161] handle_irq_event+0x4c/0xd0
[ 38.716008] handle_fasteoi_irq+0xbc/0x170
[ 38.720115] generic_handle_irq+0x2c/0x40
[ 38.724135] __handle_domain_irq+0x68/0xc0
[ 38.728243] gic_handle_irq+0xc8/0x160
[ 38.732000] el1_irq+0xb8/0x180
[ 38.735149] spi_nor_spimem_read_data+0xe0/0x140
[ 38.739779] spi_nor_read+0xc4/0x120
[ 38.743364] mtd_read_oob+0xa8/0xc0
[ 38.746860] mtd_read+0x4c/0x80
[ 38.750007] mtdchar_read+0x108/0x2a0
[ 38.753679] __vfs_read+0x20/0x50
[ 38.757002] vfs_read+0xa4/0x190
[ 38.760237] ksys_read+0x6c/0xf0
[ 38.763471] __arm64_sys_read+0x20/0x30
[ 38.767319] el0_svc_common.constprop.3+0x90/0x160
[ 38.772125] do_el0_svc+0x28/0x90
[ 38.775449] el0_sync_handler+0x118/0x190
[ 38.779468] el0_sync+0x140/0x180
[ 38.782793] Code: 91000294 1400000f d50339bf f9405e80 (f90002c0)
[ 38.788910] ---[ end trace 55da560db4d6bef7 ]---
[ 38.793540] Kernel panic - not syncing: Fatal exception in interrupt
[ 38.799914] SMP: stopping secondary CPUs
[ 38.803849] Kernel Offset: disabled
[ 38.807344] CPU features: 0x10002,20006008
[ 38.811451] Memory Limit: none
[ 38.814513] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
So it is clear that the "interruptible" part isn't handled correctly.
When the process receives a signal, one could either attempt a clean
abort (which appears to be difficult with this hardware) or just keep
restarting the sleep until the wait queue really completes. But checking
in a loop for -ERESTARTSYS is a bit too complicated for this driver, so
just make the sleep uninterruptible, to avoid all that nonsense.
The wait queue was actually restructured as a completion, after polling
other drivers for the most "popular" approach.
Fixes: 349ad66c0ab0 ("spi:Add Freescale DSPI driver for Vybrid VF610 platform")
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20200318001603.9650-7-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-fsl-dspi.c | 19 ++++++-------------
1 file changed, 6 insertions(+), 13 deletions(-)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index d47bd26577b37..68e33457c814f 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -192,8 +192,7 @@ struct fsl_dspi {
u8 bytes_per_word;
const struct fsl_dspi_devtype_data *devtype_data;
- wait_queue_head_t waitq;
- u32 waitflags;
+ struct completion xfer_done;
struct fsl_dspi_dma *dma;
};
@@ -703,10 +702,8 @@ static irqreturn_t dspi_interrupt(int irq, void *dev_id)
if (!(spi_sr & (SPI_SR_EOQF | SPI_SR_TCFQF)))
return IRQ_NONE;
- if (dspi_rxtx(dspi) == 0) {
- dspi->waitflags = 1;
- wake_up_interruptible(&dspi->waitq);
- }
+ if (dspi_rxtx(dspi) == 0)
+ complete(&dspi->xfer_done);
return IRQ_HANDLED;
}
@@ -800,13 +797,9 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr,
status = dspi_poll(dspi);
} while (status == -EINPROGRESS);
} else if (trans_mode != DSPI_DMA_MODE) {
- status = wait_event_interruptible(dspi->waitq,
- dspi->waitflags);
- dspi->waitflags = 0;
+ wait_for_completion(&dspi->xfer_done);
+ reinit_completion(&dspi->xfer_done);
}
- if (status)
- dev_err(&dspi->pdev->dev,
- "Waiting for transfer to complete failed!\n");
if (transfer->delay_usecs)
udelay(transfer->delay_usecs);
@@ -1122,7 +1115,7 @@ static int dspi_probe(struct platform_device *pdev)
goto out_clk_put;
}
- init_waitqueue_head(&dspi->waitq);
+ init_completion(&dspi->xfer_done);
poll_mode:
if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) {
--
2.20.1
next prev parent reply other threads:[~2020-04-10 3:50 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-10 3:48 [PATCH AUTOSEL 5.4 01/46] cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 02/46] staging: wilc1000: avoid double unlocking of 'wilc->hif_cs' mutex Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 03/46] media: venus: hfi_parser: Ignore HEVC encoding for V1 Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 04/46] firmware: arm_sdei: fix double-lock on hibernate with shared events Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 05/46] null_blk: Fix the null_add_dev() error path Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 06/46] null_blk: Handle null_add_dev() failures properly Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 07/46] null_blk: fix spurious IO errors after failed past-wp access Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 08/46] media: imx: imx7_mipi_csis: Power off the source when stopping streaming Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 09/46] media: imx: imx7-media-csi: Fix video field handling Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 10/46] xhci: bail out early if driver can't accress host in resume Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 11/46] ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add() Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 12/46] x86: Don't let pgprot_modify() change the page encryption bit Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 13/46] dma-mapping: Fix dma_pgprot() for unencrypted coherent pages Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 14/46] block: keep bdi->io_pages in sync with max_sectors_kb for stacked devices Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 15/46] debugfs: Check module state before warning in {full/open}_proxy_open() Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 16/46] irqchip/versatile-fpga: Handle chained IRQs properly Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 17/46] time/sched_clock: Expire timer in hardirq context Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 18/46] media: allegro: fix type of gop_length in channel_create message Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 19/46] sched: Avoid scale real weight down to zero Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 20/46] selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 21/46] PCI/switchtec: Fix init_completion race condition with poll_wait() Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 22/46] block, bfq: move forward the getting of an extra ref in bfq_bfqq_move Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 23/46] media: i2c: video-i2c: fix build errors due to 'imply hwmon' Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 24/46] libata: Remove extra scsi_host_put() in ata_scsi_add_hosts() Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 25/46] pstore/platform: fix potential mem leak if pstore_init_fs failed Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 26/46] gfs2: Do log_flush in gfs2_ail_empty_gl even if ail list is empty Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 27/46] gfs2: Don't demote a glock until its revokes are written Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 28/46] cpufreq: imx6q: fix error handling Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 29/46] x86/boot: Use unsigned comparison for addresses Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 30/46] efi/x86: Ignore the memory attributes table on i386 Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 31/46] genirq/irqdomain: Check pointer in irq_domain_alloc_irqs_hierarchy() Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 32/46] blk-mq: Keep set->nr_hw_queues and set->map[].nr_queues in sync Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 33/46] block: Fix use-after-free issue accessing struct io_cq Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 34/46] media: i2c: ov5695: Fix power on and off sequences Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 35/46] usb: dwc3: core: add support for disabling SS instances in park mode Sasha Levin
2020-04-10 3:48 ` [PATCH AUTOSEL 5.4 36/46] irqchip/gic-v4: Provide irq_retrigger to avoid circular locking dependency Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 5.4 37/46] md: check arrays is suspended in mddev_detach before call quiesce operations Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 5.4 38/46] firmware: fix a double abort case with fw_load_sysfs_fallback Sasha Levin
2020-04-10 3:49 ` Sasha Levin [this message]
2020-04-10 3:49 ` [PATCH AUTOSEL 5.4 40/46] locking/lockdep: Avoid recursion in lockdep_count_{for,back}ward_deps() Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 5.4 41/46] block, bfq: fix use-after-free in bfq_idle_slice_timer_body Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 5.4 42/46] btrfs: hold a ref on the root in btrfs_recover_relocation Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 5.4 43/46] btrfs: qgroup: ensure qgroup_rescan_running is only set when the worker is at least queued Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 5.4 44/46] btrfs: remove a BUG_ON() from merge_reloc_roots() Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 5.4 45/46] btrfs: restart relocate_tree_blocks properly Sasha Levin
2020-04-10 3:49 ` [PATCH AUTOSEL 5.4 46/46] btrfs: track reloc roots based on their commit root bytenr Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200410034909.8922-39-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=michael@walle.cc \
--cc=stable@vger.kernel.org \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).