From: mani@kernel.org
To: robh+dt@kernel.org, mcoquelin.stm32@gmail.com, alexandre.torgue@st.com
Cc: devicetree@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Manivannan Sadhasivam <mani@kernel.org>
Subject: [PATCH 2/6] ARM: dts: Add missing pinctrl entries for STM32MP15
Date: Mon, 20 Apr 2020 23:01:20 +0530 [thread overview]
Message-ID: <20200420173124.27416-3-mani@kernel.org> (raw)
In-Reply-To: <20200420173124.27416-1-mani@kernel.org>
From: Manivannan Sadhasivam <mani@kernel.org>
These pinctrl definitions will be used by Stinger96/IoTBox boards
from Shiratech.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
---
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 64 ++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index aeddcaadb829..858c83038e5a 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1519,6 +1519,30 @@
};
};
+ usart2_pins_b: usart2-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+ <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 4, AF7)>, /* USART2_RX */
+ <STM32_PINMUX('E', 15, AF7)>; /* USART2_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart2_sleep_pins_b: usart2-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */
+ <STM32_PINMUX('F', 4, ANALOG)>, /* USART2_RX */
+ <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */
+ };
+ };
+
usart3_pins_a: usart3-0 {
pins1 {
pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
@@ -1558,6 +1582,19 @@
};
};
+ uart4_pins_c: uart4-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
uart7_pins_a: uart7-0 {
pins1 {
pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
@@ -1573,6 +1610,19 @@
};
};
+ uart7_pins_b: uart7-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
+ bias-disable;
+ };
+ };
+
uart8_pins_a: uart8-0 {
pins1 {
pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
@@ -1647,4 +1697,18 @@
bias-disable;
};
};
+
+ spi4_pins_a: spi4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
+ <STM32_PINMUX('E', 6, AF5)>; /* SPI4_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
+ bias-disable;
+ };
+ };
};
--
2.17.1
next prev parent reply other threads:[~2020-04-20 17:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-20 17:31 [PATCH 0/6] Add Stinger96 and IoT Box board support mani
2020-04-20 17:31 ` [PATCH 1/6] dt-bindings: Add vendor prefix for Shiratech Solutions mani
2020-04-20 17:31 ` mani [this message]
2020-04-21 11:16 ` [PATCH 2/6] ARM: dts: Add missing pinctrl entries for STM32MP15 Alexandre Torgue
2020-04-20 17:31 ` [PATCH 3/6] dt-bindings: arm: stm32: Document Stinger96 compatible mani
2020-04-20 17:31 ` [PATCH 4/6] ARM: dts: stm32mp1: Add Stinger96 board support mani
2020-04-20 17:31 ` [PATCH 5/6] dt-bindings: arm: stm32: Document IoT Box compatible mani
2020-04-20 17:31 ` [PATCH 6/6] ARM: dts: stm32mp1: Add IoT Box board support mani
2020-04-29 8:02 ` Alexandre Torgue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200420173124.27416-3-mani@kernel.org \
--to=mani@kernel.org \
--cc=alexandre.torgue@st.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).