From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Jonathan Marek <jonathan@marek.ca>
Cc: linux-arm-msm@vger.kernel.org, Andy Gross <agross@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] arm64: dts: qcom: sm8250: use dt-bindings defines for clocks
Date: Thu, 28 May 2020 20:22:48 -0700 [thread overview]
Message-ID: <20200529032248.GC279327@builder.lan> (raw)
In-Reply-To: <20200523131213.18653-1-jonathan@marek.ca>
On Sat 23 May 06:12 PDT 2020, Jonathan Marek wrote:
> Use the dt-bindings defines for qupv3_id_1 node's clocks.
>
Applied
Thanks,
Bjorn
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 9c210fbac65e..04c9c215ffcd 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -292,7 +292,8 @@ qupv3_id_1: geniqup@ac0000 {
> compatible = "qcom,geni-se-qup";
> reg = <0x0 0x00ac0000 0x0 0x6000>;
> clock-names = "m-ahb", "s-ahb";
> - clocks = <&gcc 133>, <&gcc 134>;
> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> #address-cells = <2>;
> #size-cells = <2>;
> ranges;
> @@ -302,7 +303,7 @@ uart2: serial@a90000 {
> compatible = "qcom,geni-debug-uart";
> reg = <0x0 0x00a90000 0x0 0x4000>;
> clock-names = "se";
> - clocks = <&gcc 113>;
> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> };
> --
> 2.26.1
>
prev parent reply other threads:[~2020-05-29 3:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-23 13:12 [PATCH] arm64: dts: qcom: sm8250: use dt-bindings defines for clocks Jonathan Marek
2020-05-29 3:22 ` Bjorn Andersson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200529032248.GC279327@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathan@marek.ca \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).