linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: michael@walle.cc, robh+dt@kernel.org, broonie@kernel.org,
	gregkh@linuxfoundation.org, andriy.shevchenko@linux.intel.com,
	devicetree@vger.kernel.org, linus.walleij@linaro.org,
	bgolaszewski@baylibre.com, arnd@arndb.de,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Lee Jones <lee.jones@linaro.org>
Subject: [PATCH v2 1/1] mfd: Add I2C based System Configuaration (SYSCON) access
Date: Wed, 17 Jun 2020 09:41:32 +0100	[thread overview]
Message-ID: <20200617084132.704549-1-lee.jones@linaro.org> (raw)

The existing SYSCON implementation only supports MMIO (memory mapped)
accesses, facilitated by Regmap.  This extends support for registers
held behind I2C busses.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
Change log:

v1 => v2
  - Remove legacy references to OF
  - Allow building as a module (fixes h8300 0-day issue)

 drivers/mfd/Kconfig            |  7 +++
 drivers/mfd/Makefile           |  1 +
 drivers/mfd/syscon-i2c.c       | 90 ++++++++++++++++++++++++++++++++++
 include/linux/mfd/syscon-i2c.h | 26 ++++++++++
 4 files changed, 124 insertions(+)
 create mode 100644 drivers/mfd/syscon-i2c.c
 create mode 100644 include/linux/mfd/syscon-i2c.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 0a59249198d34..f25f80f68edca 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1300,6 +1300,13 @@ config MFD_SYSCON
 	  Select this option to enable accessing system control registers
 	  via regmap.
 
+config MFD_SYSCON_I2C
+	tristate "System Controller Register R/W Based on I2C Regmap"
+	select REGMAP_I2C
+	help
+	  Select this option to enable accessing system control registers
+	  via I2C using regmap.
+
 config MFD_DAVINCI_VOICECODEC
 	tristate
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f935d10cbf0fc..0aec1f42ac979 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -219,6 +219,7 @@ obj-$(CONFIG_MFD_RK808)		+= rk808.o
 obj-$(CONFIG_MFD_RN5T618)	+= rn5t618.o
 obj-$(CONFIG_MFD_SEC_CORE)	+= sec-core.o sec-irq.o
 obj-$(CONFIG_MFD_SYSCON)	+= syscon.o
+obj-$(CONFIG_MFD_SYSCON_I2C)	+= syscon-i2c.o
 obj-$(CONFIG_MFD_LM3533)	+= lm3533-core.o lm3533-ctrlbank.o
 obj-$(CONFIG_MFD_VEXPRESS_SYSREG)	+= vexpress-sysreg.o
 obj-$(CONFIG_MFD_RETU)		+= retu-mfd.o
diff --git a/drivers/mfd/syscon-i2c.c b/drivers/mfd/syscon-i2c.c
new file mode 100644
index 0000000000000..be20ff45ece07
--- /dev/null
+++ b/drivers/mfd/syscon-i2c.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * System Control Driver accessed over I2C
+ *
+ * Copyright (C) 2020 Linaro Ltd.
+ *
+ * Author: Lee Jones <lee.jones@linaro.org>
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/list.h>
+#include <linux/mfd/syscon-i2c.h>
+#include <linux/regmap.h>
+
+static DEFINE_SPINLOCK(syscon_i2c_list_slock);
+static LIST_HEAD(syscon_i2c_list);
+
+struct syscon {
+	struct device *dev;
+	struct regmap *regmap;
+	struct list_head list;
+};
+
+static const struct regmap_config syscon_i2c_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static struct syscon *syscon_i2c_register(struct i2c_client *client)
+{
+	struct regmap_config syscon_config = syscon_i2c_regmap_config;
+	struct device *dev = &client->dev;
+	struct syscon *syscon;
+	struct regmap *regmap;
+	int ret;
+
+	syscon = devm_kzalloc(dev, sizeof(*syscon), GFP_KERNEL);
+	if (!syscon)
+		return ERR_PTR(-ENOMEM);
+
+	syscon_config.name = dev_name(dev);
+
+	regmap = devm_regmap_init_i2c(client, &syscon_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "Failed to initialise Regmap I2C\n");
+		ret = PTR_ERR(regmap);
+		return ERR_PTR(ret);
+	}
+
+	syscon->regmap = regmap;
+	syscon->dev = dev;
+
+	spin_lock(&syscon_i2c_list_slock);
+	list_add_tail(&syscon->list, &syscon_i2c_list);
+	spin_unlock(&syscon_i2c_list_slock);
+
+	return syscon;
+}
+
+static struct regmap *syscon_i2c_get_regmap(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct syscon *entry, *syscon = NULL;
+
+	spin_lock(&syscon_i2c_list_slock);
+
+	list_for_each_entry(entry, &syscon_i2c_list, list)
+		if (entry->dev == dev) {
+			syscon = entry;
+			break;
+		}
+
+	spin_unlock(&syscon_i2c_list_slock);
+
+	if (!syscon)
+		syscon = syscon_i2c_register(client);
+
+	if (IS_ERR(syscon))
+		return ERR_CAST(syscon);
+
+	return syscon->regmap;
+}
+
+struct regmap *syscon_i2c_to_regmap(struct i2c_client *client)
+{
+	return syscon_i2c_get_regmap(client);
+}
+EXPORT_SYMBOL_GPL(syscon_i2c_to_regmap);
diff --git a/include/linux/mfd/syscon-i2c.h b/include/linux/mfd/syscon-i2c.h
new file mode 100644
index 0000000000000..e9ded6a363234
--- /dev/null
+++ b/include/linux/mfd/syscon-i2c.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * System Control Driver accessed via I2C
+ *
+ * Copyright (C) 2020 Linaro Ltd.
+ *
+ * Author: Lee Jones <lee.jones@linaro.org>
+ */
+
+#ifndef __LINUX_MFD_SYSCON_I2C_H__
+#define __LINUX_MFD_SYSCON_I2C_H__
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+
+#ifdef CONFIG_MFD_SYSCON_I2C
+extern struct regmap *syscon_i2c_to_regmap(struct i2c_client *client);
+#else
+static inline struct regmap *syscon_i2c_to_regmap(struct i2c_client *client)
+{
+	return ERR_PTR(-ENOTSUPP);
+}
+#endif
+
+#endif /* __LINUX_MFD_SYSCON_I2C_H__ */
-- 
2.25.1


                 reply	other threads:[~2020-06-17  8:41 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200617084132.704549-1-lee.jones@linaro.org \
    --to=lee.jones@linaro.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=arnd@arndb.de \
    --cc=bgolaszewski@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael@walle.cc \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).