From: Coiby Xu <coiby.xu@gmail.com>
To: Dan Carpenter <dan.carpenter@oracle.com>
Cc: devel@driverdev.osuosl.org,
"supporter:QLOGIC QLGE 10Gb ETHERNET DRIVER"
<GR-Linux-NIC-Dev@marvell.com>,
Manish Chopra <manishc@marvell.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Shung-Hsi Yu <shung-hsi.yu@suse.com>,
open list <linux-kernel@vger.kernel.org>,
Benjamin Poirier <benjamin.poirier@gmail.com>,
"open list:QLOGIC QLGE 10Gb ETHERNET DRIVER"
<netdev@vger.kernel.org>
Subject: Re: [PATCH v1 1/6] staging: qlge: Initialize devlink health dump framework for the dlge driver
Date: Fri, 9 Oct 2020 08:12:45 +0800 [thread overview]
Message-ID: <20201009001245.dhtyvhbkdpmaadng@Rk> (raw)
In-Reply-To: <20201008133142.GB1042@kadam>
On Thu, Oct 08, 2020 at 04:31:42PM +0300, Dan Carpenter wrote:
>On Thu, Oct 08, 2020 at 07:58:03PM +0800, Coiby Xu wrote:
>> Initialize devlink health dump framework for the dlge driver so the
>> coredump could be done via devlink.
>>
>> Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
>> ---
>> drivers/staging/qlge/Kconfig | 1 +
>> drivers/staging/qlge/Makefile | 2 +-
>> drivers/staging/qlge/qlge.h | 9 +++++++
>> drivers/staging/qlge/qlge_devlink.c | 38 +++++++++++++++++++++++++++++
>> drivers/staging/qlge/qlge_devlink.h | 8 ++++++
>> drivers/staging/qlge/qlge_main.c | 28 +++++++++++++++++++++
>> 6 files changed, 85 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/staging/qlge/qlge_devlink.c
>> create mode 100644 drivers/staging/qlge/qlge_devlink.h
>>
>> diff --git a/drivers/staging/qlge/Kconfig b/drivers/staging/qlge/Kconfig
>> index a3cb25a3ab80..6d831ed67965 100644
>> --- a/drivers/staging/qlge/Kconfig
>> +++ b/drivers/staging/qlge/Kconfig
>> @@ -3,6 +3,7 @@
>> config QLGE
>> tristate "QLogic QLGE 10Gb Ethernet Driver Support"
>> depends on ETHERNET && PCI
>> + select NET_DEVLINK
>> help
>> This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
>>
>> diff --git a/drivers/staging/qlge/Makefile b/drivers/staging/qlge/Makefile
>> index 1dc2568e820c..07c1898a512e 100644
>> --- a/drivers/staging/qlge/Makefile
>> +++ b/drivers/staging/qlge/Makefile
>> @@ -5,4 +5,4 @@
>>
>> obj-$(CONFIG_QLGE) += qlge.o
>>
>> -qlge-objs := qlge_main.o qlge_dbg.o qlge_mpi.o qlge_ethtool.o
>> +qlge-objs := qlge_main.o qlge_dbg.o qlge_mpi.o qlge_ethtool.o qlge_devlink.o
>> diff --git a/drivers/staging/qlge/qlge.h b/drivers/staging/qlge/qlge.h
>> index b295990e361b..290e754450c5 100644
>> --- a/drivers/staging/qlge/qlge.h
>> +++ b/drivers/staging/qlge/qlge.h
>> @@ -2060,6 +2060,14 @@ struct nic_operations {
>> int (*port_initialize)(struct ql_adapter *qdev);
>> };
>>
>> +
>> +
>
>Having multiple blank lines in a row leads to a static checker warning.
>Please run `checkpatch.pl --strict` over your patches.
>
>> +struct qlge_devlink {
>> + struct ql_adapter *qdev;
>> + struct net_device *ndev;
>> + struct devlink_health_reporter *reporter;
>> +};
>> +
>> /*
>> * The main Adapter structure definition.
>> * This structure has all fields relevant to the hardware.
>> @@ -2077,6 +2085,7 @@ struct ql_adapter {
>> struct pci_dev *pdev;
>> struct net_device *ndev; /* Parent NET device */
>>
>> + struct qlge_devlink *ql_devlink;
>> /* Hardware information */
>> u32 chip_rev_id;
>> u32 fw_rev_id;
>> diff --git a/drivers/staging/qlge/qlge_devlink.c b/drivers/staging/qlge/qlge_devlink.c
>> new file mode 100644
>> index 000000000000..aa45e7e368c0
>> --- /dev/null
>> +++ b/drivers/staging/qlge/qlge_devlink.c
>> @@ -0,0 +1,38 @@
>> +#include "qlge.h"
>> +#include "qlge_devlink.h"
>> +
>> +static int
>> +qlge_reporter_coredump(struct devlink_health_reporter *reporter,
>> + struct devlink_fmsg *fmsg, void *priv_ctx,
>> + struct netlink_ext_ack *extack)
>> +{
>> + return 0;
>> +}
>> +
>> +static const struct devlink_health_reporter_ops qlge_reporter_ops = {
>> + .name = "dummy",
>> + .dump = qlge_reporter_coredump,
>
>Indented too far.
>
>> +};
>> +
>> +int qlge_health_create_reporters(struct qlge_devlink *priv)
>> +{
>> + int err;
>> +
>
>No blanks in the middle of declarations.
>
>> + struct devlink_health_reporter *reporter;
>> + struct devlink *devlink;
>
>Generally this driver declares variables in "Reverse Christmas Tree"
>order. The names are orderred by the length of the line from longest
>to shortest.
>
> type long_name;
> type medium;
> type short;
>
>> +
>> + devlink = priv_to_devlink(priv);
>> + reporter =
>> + devlink_health_reporter_create(devlink, &qlge_reporter_ops,
>> + 0,
>> + priv);
>
>Break this up like so:
>
> reporter = devlink_health_reporter_create(devlink, &qlge_reporter_ops,
> 0, priv);
>
>
>> + if (IS_ERR(reporter)) {
>> + netdev_warn(priv->ndev,
>> + "Failed to create reporter, err = %ld\n",
>> + PTR_ERR(reporter));
>> + return PTR_ERR(reporter);
>
>No point in returning an error if the caller doesn't check?
>
>> + }
>> + priv->reporter = reporter;
>> +
>> + return err;
>
>err is uninitialized. "return 0;"
>
>> +}
>> diff --git a/drivers/staging/qlge/qlge_devlink.h b/drivers/staging/qlge/qlge_devlink.h
>> new file mode 100644
>> index 000000000000..c91f7a29e805
>> --- /dev/null
>> +++ b/drivers/staging/qlge/qlge_devlink.h
>> @@ -0,0 +1,8 @@
>> +#ifndef QLGE_DEVLINK_H
>> +#define QLGE_DEVLINK_H
>> +
>> +#include <net/devlink.h>
>> +
>> +int qlge_health_create_reporters(struct qlge_devlink *priv);
>> +
>> +#endif /* QLGE_DEVLINK_H */
>> diff --git a/drivers/staging/qlge/qlge_main.c b/drivers/staging/qlge/qlge_main.c
>> index 27da386f9d87..135225530e51 100644
>> --- a/drivers/staging/qlge/qlge_main.c
>> +++ b/drivers/staging/qlge/qlge_main.c
>> @@ -42,6 +42,7 @@
>> #include <net/ip6_checksum.h>
>>
>> #include "qlge.h"
>> +#include "qlge_devlink.h"
>>
>> char qlge_driver_name[] = DRV_NAME;
>> const char qlge_driver_version[] = DRV_VERSION;
>> @@ -4549,6 +4550,8 @@ static void ql_timer(struct timer_list *t)
>> mod_timer(&qdev->timer, jiffies + (5 * HZ));
>> }
>>
>> +static const struct devlink_ops qlge_devlink_ops;
>> +
>> static int qlge_probe(struct pci_dev *pdev,
>> const struct pci_device_id *pci_entry)
>> {
>> @@ -4556,6 +4559,13 @@ static int qlge_probe(struct pci_dev *pdev,
>> struct ql_adapter *qdev = NULL;
>> static int cards_found;
>> int err = 0;
>> + struct devlink *devlink;
>> + struct qlge_devlink *ql_devlink;
>> +
>> + devlink = devlink_alloc(&qlge_devlink_ops, sizeof(struct qlge_devlink));
>> + if (!devlink)
>> + return -ENOMEM;
>> + ql_devlink = devlink_priv(devlink);
>>
>> ndev = alloc_etherdev_mq(sizeof(struct ql_adapter),
>> min(MAX_CPUS,
>> @@ -4614,6 +4624,16 @@ static int qlge_probe(struct pci_dev *pdev,
>> free_netdev(ndev);
>> return err;
>> }
>> +
>> + err = devlink_register(devlink, &pdev->dev);
>> + if (err) {
>> + goto devlink_free;
>> + }
>
>Checkpatch warning.
>
Thank you for the reminding!
>regards,
>dan carpenter
>
--
Best regards,
Coiby
next prev parent reply other threads:[~2020-10-09 0:12 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20201008115808.91850-1-coiby.xu@gmail.com>
2020-10-08 11:58 ` [PATCH v1 1/6] staging: qlge: Initialize devlink health dump framework for the dlge driver Coiby Xu
2020-10-08 12:22 ` Willem de Bruijn
2020-10-08 12:54 ` Coiby Xu
2020-10-12 8:08 ` Coiby Xu
2020-10-08 13:31 ` Dan Carpenter
2020-10-09 0:12 ` Coiby Xu [this message]
2020-10-08 17:45 ` kernel test robot
2020-10-10 7:35 ` Benjamin Poirier
2020-10-10 10:24 ` Coiby Xu
2020-10-10 13:48 ` Benjamin Poirier
2020-10-12 11:24 ` Coiby Xu
2020-10-13 0:37 ` Benjamin Poirier
2020-10-15 3:37 ` Coiby Xu
2020-10-15 11:06 ` Benjamin Poirier
2020-10-16 23:08 ` Coiby Xu
2020-10-08 11:58 ` [PATCH v1 2/6] staging: qlge: coredump via devlink health reporter Coiby Xu
2020-10-08 13:39 ` Dan Carpenter
2020-10-09 0:14 ` Coiby Xu
2020-10-10 7:48 ` Benjamin Poirier
2020-10-10 10:02 ` Coiby Xu
2020-10-10 13:22 ` Benjamin Poirier
2020-10-12 11:51 ` Coiby Xu
2020-10-13 1:18 ` Benjamin Poirier
2020-10-08 11:58 ` [PATCH v1 3/6] staging: qlge: support force_coredump option for devlink health dump Coiby Xu
2020-10-08 11:58 ` [PATCH v1 4/6] staging: qlge: remove mpi_core_to_log which sends coredump to the kernel ring buffer Coiby Xu
2020-10-08 11:58 ` [PATCH v1 5/6] staging: qlge: clean up debugging code in the QL_ALL_DUMP ifdef land Coiby Xu
2020-10-10 8:01 ` Benjamin Poirier
2020-10-10 10:00 ` Coiby Xu
2020-10-10 13:40 ` Benjamin Poirier
2020-10-12 11:29 ` Coiby Xu
2020-10-08 11:58 ` [PATCH v1 6/6] staging: qlge: add documentation for debugging qlge Coiby Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201009001245.dhtyvhbkdpmaadng@Rk \
--to=coiby.xu@gmail.com \
--cc=GR-Linux-NIC-Dev@marvell.com \
--cc=benjamin.poirier@gmail.com \
--cc=dan.carpenter@oracle.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manishc@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=shung-hsi.yu@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).