From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Ludovic Desroches <ludovic.desroches@microchip.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH v2 11/11] ARM: dts: at91: remove deprecated ADC properties
Date: Tue, 17 Nov 2020 15:06:56 +0100 [thread overview]
Message-ID: <20201117140656.1235055-12-alexandre.belloni@bootlin.com> (raw)
In-Reply-To: <20201117140656.1235055-1-alexandre.belloni@bootlin.com>
atmel,adc-res, atmel,adc-res-names and the trigger nodes are not parsed by
the driver anymore and the information is now defined in the driver data.
Also remove the leftover #address-cells and #size-cells that were used when
the trigger nodes had a unit-address.
Finally, the default is already to use the highest resoution. Remove
atmel,adc-use-res from the SoC dtsi.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
---
arch/arm/boot/dts/at91sam9260.dtsi | 25 -------------------------
arch/arm/boot/dts/at91sam9g45.dtsi | 27 ---------------------------
arch/arm/boot/dts/at91sam9rl.dtsi | 28 ----------------------------
arch/arm/boot/dts/at91sam9x5.dtsi | 28 ----------------------------
arch/arm/boot/dts/sama5d3.dtsi | 24 ------------------------
arch/arm/boot/dts/sama5d4.dtsi | 22 ----------------------
6 files changed, 154 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 82c5d7fd9811..019f1c3d4d30 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -697,8 +697,6 @@ spi1: spi@fffcc000 {
};
adc0: adc@fffe0000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "atmel,at91sam9260-adc";
reg = <0xfffe0000 0x100>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -708,29 +706,6 @@ adc0: adc@fffe0000 {
atmel,adc-channels-used = <0xf>;
atmel,adc-vref = <3300>;
atmel,adc-startup-time = <15>;
- atmel,adc-res = <8 10>;
- atmel,adc-res-names = "lowres", "highres";
- atmel,adc-use-res = "highres";
-
- trigger0 {
- trigger-name = "timer-counter-0";
- trigger-value = <0x1>;
- };
- trigger1 {
- trigger-name = "timer-counter-1";
- trigger-value = <0x3>;
- };
-
- trigger2 {
- trigger-name = "timer-counter-2";
- trigger-value = <0x5>;
- };
-
- trigger3 {
- trigger-name = "external";
- trigger-value = <0xd>;
- trigger-external;
- };
};
rtc@fffffd20 {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 19fc748a87c5..2ab730fd6472 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -812,8 +812,6 @@ ac97: sound@fffac000 {
};
adc0: adc@fffb0000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "atmel,at91sam9g45-adc";
reg = <0xfffb0000 0x100>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -822,31 +820,6 @@ adc0: adc@fffb0000 {
atmel,adc-channels-used = <0xff>;
atmel,adc-vref = <3300>;
atmel,adc-startup-time = <40>;
- atmel,adc-res = <8 10>;
- atmel,adc-res-names = "lowres", "highres";
- atmel,adc-use-res = "highres";
-
- trigger0 {
- trigger-name = "external-rising";
- trigger-value = <0x1>;
- trigger-external;
- };
- trigger1 {
- trigger-name = "external-falling";
- trigger-value = <0x2>;
- trigger-external;
- };
-
- trigger2 {
- trigger-name = "external-any";
- trigger-value = <0x3>;
- trigger-external;
- };
-
- trigger3 {
- trigger-name = "continuous";
- trigger-value = <0x6>;
- };
};
isi@fffb4000 {
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 36a42a9fe195..730d1182c73e 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -266,8 +266,6 @@ spi0: spi@fffcc000 {
};
adc0: adc@fffd0000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "atmel,at91sam9rl-adc";
reg = <0xfffd0000 0x100>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -277,32 +275,6 @@ adc0: adc@fffd0000 {
atmel,adc-channels-used = <0x3f>;
atmel,adc-vref = <3300>;
atmel,adc-startup-time = <40>;
- atmel,adc-res = <8 10>;
- atmel,adc-res-names = "lowres", "highres";
- atmel,adc-use-res = "highres";
-
- trigger0 {
- trigger-name = "external-rising";
- trigger-value = <0x1>;
- trigger-external;
- };
-
- trigger1 {
- trigger-name = "external-falling";
- trigger-value = <0x2>;
- trigger-external;
- };
-
- trigger2 {
- trigger-name = "external-any";
- trigger-value = <0x3>;
- trigger-external;
- };
-
- trigger3 {
- trigger-name = "continuous";
- trigger-value = <0x6>;
- };
};
usb0: gadget@fffd4000 {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 4cdb05079cc7..395e883644cd 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -795,8 +795,6 @@ uart1: serial@f8044000 {
};
adc0: adc@f804c000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "atmel,at91sam9x5-adc";
reg = <0xf804c000 0x100>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -808,32 +806,6 @@ adc0: adc@f804c000 {
atmel,adc-vref = <3300>;
atmel,adc-startup-time = <40>;
atmel,adc-sample-hold-time = <11>;
- atmel,adc-res = <8 10>;
- atmel,adc-res-names = "lowres", "highres";
- atmel,adc-use-res = "highres";
-
- trigger0 {
- trigger-name = "external-rising";
- trigger-value = <0x1>;
- trigger-external;
- };
-
- trigger1 {
- trigger-name = "external-falling";
- trigger-value = <0x2>;
- trigger-external;
- };
-
- trigger2 {
- trigger-name = "external-any";
- trigger-value = <0x3>;
- trigger-external;
- };
-
- trigger3 {
- trigger-name = "continuous";
- trigger-value = <0x6>;
- };
};
spi0: spi@f0000000 {
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index bba2a3f41c42..7c979652f330 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -305,8 +305,6 @@ ssc1: ssc@f800c000 {
};
adc0: adc@f8018000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "atmel,sama5d3-adc";
reg = <0xf8018000 0x100>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
@@ -333,30 +331,8 @@ &pinctrl_adc0_ad11
atmel,adc-startup-time = <40>;
atmel,adc-use-external-triggers;
atmel,adc-vref = <3000>;
- atmel,adc-res = <10 12>;
atmel,adc-sample-hold-time = <11>;
- atmel,adc-res-names = "lowres", "highres";
status = "disabled";
-
- trigger0 {
- trigger-name = "external-rising";
- trigger-value = <0x1>;
- trigger-external;
- };
- trigger1 {
- trigger-name = "external-falling";
- trigger-value = <0x2>;
- trigger-external;
- };
- trigger2 {
- trigger-name = "external-any";
- trigger-value = <0x3>;
- trigger-external;
- };
- trigger3 {
- trigger-name = "continuous";
- trigger-value = <0x6>;
- };
};
i2c2: i2c@f801c000 {
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 04f24cf752d3..05c55875835d 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -661,31 +661,9 @@ adc0: adc@fc034000 {
atmel,adc-startup-time = <40>;
atmel,adc-use-external-triggers;
atmel,adc-vref = <3000>;
- atmel,adc-res = <8 10>;
atmel,adc-sample-hold-time = <11>;
- atmel,adc-res-names = "lowres", "highres";
atmel,adc-ts-pressure-threshold = <10000>;
status = "disabled";
-
- trigger0 {
- trigger-name = "external-rising";
- trigger-value = <0x1>;
- trigger-external;
- };
- trigger1 {
- trigger-name = "external-falling";
- trigger-value = <0x2>;
- trigger-external;
- };
- trigger2 {
- trigger-name = "external-any";
- trigger-value = <0x3>;
- trigger-external;
- };
- trigger3 {
- trigger-name = "continuous";
- trigger-value = <0x6>;
- };
};
aes@fc044000 {
--
2.28.0
next prev parent reply other threads:[~2020-11-17 14:08 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-17 14:06 [PATCH v2 00/11] iio: adc: at91_adc: cleanup DT bindings Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 01/11] iio: adc: at91_adc: remove platform data Alexandre Belloni
2020-11-28 14:04 ` Jonathan Cameron
2020-11-28 14:23 ` Alexandre Belloni
2020-11-28 15:26 ` Jonathan Cameron
2020-11-28 22:28 ` Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 02/11] iio: adc: at91_adc: rework resolution selection Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 03/11] dt-bindings:iio:adc:remove atmel,adc-res and atmel,adc-res-names Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 04/11] dt-bindings:iio:adc:atmel,sama9260-adc: conversion to yaml from at91_adc.txt Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 05/11] iio: adc: at91_adc: rework trigger definition Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 06/11] dt-bindings:iio:adc:remove triggers Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 07/11] iio: adc: at91_adc: merge at91_adc_probe_dt back in at91_adc_probe Alexandre Belloni
2020-11-28 15:21 ` Jonathan Cameron
2020-11-17 14:06 ` [PATCH v2 08/11] iio: adc: at91_adc: remove forward declaration Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 09/11] ARM: dts: at91: sama5d3: use proper ADC compatible Alexandre Belloni
2020-11-17 14:06 ` [PATCH v2 10/11] ARM: dts: at91: at91sam9rl: fix ADC triggers Alexandre Belloni
2020-11-17 14:06 ` Alexandre Belloni [this message]
2020-11-21 15:56 ` [PATCH v2 00/11] iio: adc: at91_adc: cleanup DT bindings Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201117140656.1235055-12-alexandre.belloni@bootlin.com \
--to=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=nicolas.ferre@microchip.com \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).