sched: DL replenish lagged too much PASSED Testing tracer wakeup_dl: PASSED Testing tracer function_graph: ============================= WARNING: suspicious RCU usage 5.10.0-rc4-next-20201119-00002-g51c2bf0ac853 #25 Tainted: G W ----------------------------- kernel/trace/trace_preemptirq.c:78 RCU not watching trace_hardirqs_off()! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 0 RCU used illegally from extended quiescent state! no locks held by swapper/0/0. stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.10.0-rc4-next-20201119-00002-g51c2bf0ac853 #25 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x240 arch/arm64/kernel/stacktrace.c:100 show_stack+0x34/0x88 arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x140/0x1bc lib/dump_stack.c:120 lockdep_rcu_suspicious+0xe4/0xf8 kernel/locking/lockdep.c:6353 trace_hardirqs_off+0x214/0x330 kernel/trace/trace_preemptirq.c:78 trace_graph_return+0x1ac/0x1d8 kernel/trace/trace_functions_graph.c:253 ftrace_return_to_handler+0xa4/0x170 kernel/trace/fgraph.c:239 return_to_handler+0x1c/0x38 arch/arm64/kernel/entry-ftrace.S:333 default_idle_call+0x94/0x38c kernel/sched/idle.c:112 cpuidle_idle_call kernel/sched/idle.c:194 [inline] do_idle+0x240/0x290 kernel/sched/idle.c:299 rest_init+0x1e8/0x2dc init/main.c:722 arch_call_rest_init+0x1c/0x28 start_kernel+0x638/0x670 init/main.c:1066 WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:5279 check_flags.part.0+0x1d4/0x1f8 kernel/locking/lockdep.c:5279 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-rc4-next-20201119-00002-g51c2bf0ac853 #25 Hardware name: linux,dummy-virt (DT) pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--) pc : check_flags.part.0+0x1d4/0x1f8 kernel/locking/lockdep.c:5279 lr : check_flags.part.0+0x1d4/0x1f8 kernel/locking/lockdep.c:5279 sp : ffffa97d6cd73a50 x29: ffffa97d6cd73a50 x28: ffffa97d6cd84000 x27: ffffa97d6c69cbb8 x26: ffffa97d6a835930 x25: 0000000000000000 x24: 0000000000000000 x23: ffffa97d6cdaf360 x22: 0000000000000001 x21: 0000000000000000 x20: 0000000000000001 x19: ffffa97d6dbcf000 x18: 00000000d8c875f1 x17: 00000000bf9a23d2 x16: 0000000000000005 x15: 0000000000000000 x14: 0000000000000028 x13: 000000000000067d x12: 0000000000000028 x11: 0101010101010101 x10: ffffa97d6cd73820 x9 : ffffa97d6a960ff8 x8 : 4e5241575f534b43 x7 : 4f4c5f4755424544 x6 : ffff35ce3dbd3667 x5 : 00000000ffffffc8 x4 : ffff35ce3dbd2c60 x3 : ffffa97d6a800000 x2 : ffffa97d6bc60000 x1 : ba5fc2cb163a2c00 x0 : 0000000000000000 Call trace: check_flags.part.0+0x1d4/0x1f8 kernel/locking/lockdep.c:5279 check_flags kernel/locking/lockdep.c:5275 [inline] lock_acquire kernel/locking/lockdep.c:5432 [inline] lock_acquire+0x208/0x508 kernel/locking/lockdep.c:5400 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x5c/0x80 kernel/locking/spinlock.c:151 vprintk_emit+0xb4/0x380 kernel/printk/printk.c:2010 vprintk_default+0x4c/0x60 kernel/printk/printk.c:2045 vprintk_func+0x120/0x330 kernel/printk/printk_safe.c:393 printk+0x78/0x9c kernel/printk/printk.c:2076 lockdep_rcu_suspicious+0x2c/0xf8 kernel/locking/lockdep.c:6317 trace_hardirqs_off+0x214/0x330 kernel/trace/trace_preemptirq.c:78 trace_graph_return+0x1ac/0x1d8 kernel/trace/trace_functions_graph.c:253 ftrace_return_to_handler+0xa4/0x170 kernel/trace/fgraph.c:239 return_to_handler+0x1c/0x38 arch/arm64/kernel/entry-ftrace.S:333 default_idle_call+0x94/0x38c kernel/sched/idle.c:112 cpuidle_idle_call kernel/sched/idle.c:194 [inline] do_idle+0x240/0x290 kernel/sched/idle.c:299 rest_init+0x1e8/0x2dc init/main.c:722 arch_call_rest_init+0x1c/0x28 start_kernel+0x638/0x670 init/main.c:1066 irq event stamp: 1719 hardirqs last enabled at (1719): [] exit_el1_irq_or_nmi+0x24/0x50 arch/arm64/kernel/entry-common.c:101 hardirqs last disabled at (1716): [] enter_el1_irq_or_nmi+0x20/0x30 arch/arm64/kernel/entry-common.c:93 softirqs last enabled at (1718): [] return_to_handler+0x0/0x38 arch/arm64/kernel/entry-ftrace.S:314 softirqs last disabled at (1717): [] irq_enter_rcu+0x88/0xa8 kernel/softirq.c:363 ---[ end trace 06e986ee87545489 ]--- ============================= WARNING: suspicious RCU usage 5.10.0-rc4-next-20201119-00002-g51c2bf0ac853 #25 Not tainted ----------------------------- include/trace/events/ipi.h:19 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 RCU used illegally from extended quiescent state! no locks held by swapper/0/0. stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-rc4-next-20201119-00002-g51c2bf0ac853 #25 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x240 arch/arm64/kernel/stacktrace.c:100 show_stack+0x34/0x88 arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x140/0x1bc lib/dump_stack.c:120 lockdep_rcu_suspicious+0xe4/0xf8 kernel/locking/lockdep.c:6353 trace_ipi_raise include/trace/events/ipi.h:19 [inline] smp_cross_call+0x220/0x228 arch/arm64/kernel/smp.c:953 arch_irq_work_raise+0x40/0x50 arch/arm64/kernel/smp.c:840 __irq_work_queue_local kernel/irq_work.c:59 [inline] __irq_work_queue_local+0xb0/0xe8 kernel/irq_work.c:53 irq_work_queue kernel/irq_work.c:75 [inline] irq_work_queue+0x5c/0xb8 kernel/irq_work.c:67 queue_flush_work kernel/printk/printk_safe.c:56 [inline] printk_safe_log_store+0x1a0/0x1d8 kernel/printk/printk_safe.c:107 vprintk_safe kernel/printk/printk_safe.c:347 [inline] vprintk_func+0x23c/0x330 kernel/printk/printk_safe.c:390 printk+0x78/0x9c kernel/printk/printk.c:2076 lockdep_rcu_suspicious+0x2c/0xf8 kernel/locking/lockdep.c:6317 trace_lock_acquire include/trace/events/lock.h:13 [inline] lock_acquire+0x340/0x508 kernel/locking/lockdep.c:5406 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x5c/0x80 kernel/locking/spinlock.c:151 vprintk_emit+0xb4/0x380 kernel/printk/printk.c:2010 vprintk_default+0x4c/0x60 kernel/printk/printk.c:2045 vprintk_func+0x120/0x330 kernel/printk/printk_safe.c:393 printk+0x78/0x9c kernel/printk/printk.c:2076 lockdep_rcu_suspicious+0x2c/0xf8 kernel/locking/lockdep.c:6317 trace_hardirqs_off+0x214/0x330 kernel/trace/trace_preemptirq.c:78 trace_graph_return+0x1ac/0x1d8 kernel/trace/trace_functions_graph.c:253 ftrace_return_to_handler+0xa4/0x170 kernel/trace/fgraph.c:239 return_to_handler+0x1c/0x38 arch/arm64/kernel/entry-ftrace.S:333 default_idle_call+0x94/0x38c kernel/sched/idle.c:112 cpuidle_idle_call kernel/sched/idle.c:194 [inline] do_idle+0x240/0x290 kernel/sched/idle.c:299 rest_init+0x1e8/0x2dc init/main.c:722 arch_call_rest_init+0x1c/0x28 start_kernel+0x638/0x670 init/main.c:1066 ============================= WARNING: suspicious RCU usage 5.10.0-rc4-next-20201119-00002-g51c2bf0ac853 #25 Not tainted ----------------------------- include/trace/events/lock.h:13 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 RCU used illegally from extended quiescent state! no locks held by swapper/0/0. stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-rc4-next-20201119-00002-g51c2bf0ac853 #25 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x240 arch/arm64/kernel/stacktrace.c:100 show_stack+0x34/0x88 arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x140/0x1bc lib/dump_stack.c:120 lockdep_rcu_suspicious+0xe4/0xf8 kernel/locking/lockdep.c:6353 trace_lock_acquire include/trace/events/lock.h:13 [inline] lock_acquire+0x340/0x508 kernel/locking/lockdep.c:5406 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x5c/0x80 kernel/locking/spinlock.c:151 vprintk_emit+0xb4/0x380 kernel/printk/printk.c:2010 vprintk_default+0x4c/0x60 kernel/printk/printk.c:2045 vprintk_func+0x120/0x330 kernel/printk/printk_safe.c:393 printk+0x78/0x9c kernel/printk/printk.c:2076 lockdep_rcu_suspicious+0x2c/0xf8 kernel/locking/lockdep.c:6317 trace_hardirqs_off+0x214/0x330 kernel/trace/trace_preemptirq.c:78 trace_graph_return+0x1ac/0x1d8 kernel/trace/trace_functions_graph.c:253 ftrace_return_to_handler+0xa4/0x170 kernel/trace/fgraph.c:239 return_to_handler+0x1c/0x38 arch/arm64/kernel/entry-ftrace.S:333 default_idle_call+0x94/0x38c kernel/sched/idle.c:112 cpuidle_idle_call kernel/sched/idle.c:194 [inline] do_idle+0x240/0x290 kernel/sched/idle.c:299 rest_init+0x1e8/0x2dc init/main.c:722 arch_call_rest_init+0x1c/0x28 start_kernel+0x638/0x670 init/main.c:1066 ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(lockdep_hardirqs_enabled())possible reason: unannotated irqs-off. irq event stamp: 1719 hardirqs last enabled at (1719): [] exit_el1_irq_or_nmi+0x24/0x50 arch/arm64/kernel/entry-common.c:101 hardirqs last disabled at (1716): [] enter_el1_irq_or_nmi+0x20/0x30 arch/arm64/kernel/entry-common.c:93 softirqs last enabled at (1718): [] return_to_handler+0x0/0x38 arch/arm64/kernel/entry-ftrace.S:314 softirqs last disabled at (1717): [] irq_enter_rcu+0x88/0xa8 kernel/softirq.c:363 PASSED pinctrl core: initialized pinctrl subsystem DMI not present or invalid. NET: Registered protocol family 16 DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations audit: initializing netlink subsys (disabled) audit: type=2000 audit(81.200:1): state=initialized audit_enabled=0 res=1 thermal_sys: Registered thermal governor 'step_wise' thermal_sys: Registered thermal governor 'power_allocator' cpuidle: using governor menu hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. ASID allocator initialised with 32768 entries Serial: AMBA PL011 UART driver 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 47, base_baud = 0) is a PL011 rev1 printk: console [ttyAMA0] enabled printk: console [ttyAMA0] enabled printk: bootconsole [pl11] disabled printk: bootconsole [pl11] disabled HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages cryptd: max_cpu_qlen set to 1000 ACPI: Interpreter disabled. iommu: Default domain type: Translated vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 FPGA manager framework Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arch_sys_counter VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) pnp: PnP ACPI: disabled NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 1024 (order: 4, 81920 bytes, linear) TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) TCP bind hash table entries: 16384 (order: 8, 1179648 bytes, linear) TCP: Hash tables configured (established 16384 bind 16384) UDP hash table entries: 1024 (order: 5, 163840 bytes, linear) UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes, linear) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 hw perfevents: enabled with armv8_pmuv3 PMU driver, 5 counters available kvm [1]: HYP mode not available Initialise system trusted keyrings workingset: timestamp_bits=44 max_order=19 bucket_order=0 squashfs: version 4.0 (2009/01/31) Phillip Lougher NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... 9p: Installing v9fs 9p2000 file system support Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) io scheduler mq-deadline registered io scheduler kyber registered pl061_gpio 9030000.pl061: PL061 GPIO chip registered pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 pci 0000:00:01.0: [1af4:1009] type 00 class 0x000200 pci 0000:00:01.0: reg 0x10: [io 0x0000-0x003f] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] pci 0000:00:02.0: [1af4:1009] type 00 class 0x000200 pci 0000:00:02.0: reg 0x10: [io 0x0000-0x003f] pci 0000:00:02.0: reg 0x14: [mem 0x00000000-0x00000fff] pci 0000:00:02.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 pci 0000:00:03.0: reg 0x10: [io 0x0000-0x001f] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] pci 0000:00:03.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] pci 0000:00:04.0: [1af4:1004] type 00 class 0x010000 pci 0000:00:04.0: reg 0x10: [io 0x0000-0x003f] pci 0000:00:04.0: reg 0x14: [mem 0x00000000-0x00000fff] pci 0000:00:04.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] pci 0000:00:03.0: BAR 6: assigned [mem 0x10000000-0x1003ffff pref] pci 0000:00:01.0: BAR 4: assigned [mem 0x8000000000-0x8000003fff 64bit pref] pci 0000:00:02.0: BAR 4: assigned [mem 0x8000004000-0x8000007fff 64bit pref] pci 0000:00:03.0: BAR 4: assigned [mem 0x8000008000-0x800000bfff 64bit pref] pci 0000:00:04.0: BAR 4: assigned [mem 0x800000c000-0x800000ffff 64bit pref] pci 0000:00:01.0: BAR 1: assigned [mem 0x10040000-0x10040fff] pci 0000:00:02.0: BAR 1: assigned [mem 0x10041000-0x10041fff] pci 0000:00:03.0: BAR 1: assigned [mem 0x10042000-0x10042fff] pci 0000:00:04.0: BAR 1: assigned [mem 0x10043000-0x10043fff] pci 0000:00:01.0: BAR 0: assigned [io 0x1000-0x103f] pci 0000:00:02.0: BAR 0: assigned [io 0x1040-0x107f] pci 0000:00:04.0: BAR 0: assigned [io 0x1080-0x10bf] pci 0000:00:03.0: BAR 0: assigned [io 0x10c0-0x10df] EINJ: ACPI disabled. virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled SuperH (H)SCI(F) driver initialized msm_serial: driver initialized cacheinfo: Unable to detect cache hierarchy for CPU 0 loop: module loaded megasas: 07.714.04.00-rc1 scsi host0: Virtio SCSI HBA scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 random: fast init done sd 0:0:0:0: Power-on or device reset occurred sd 0:0:0:0: [sda] 524288 512-byte logical blocks: (268 MB/256 MiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 63 00 00 08 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: detected capacity change from 0 to 268435456 physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 Intel/Sharp Extended Query Table at 0x0031 Using buffer write method erase region 0: offset=0x0,size=0x40000,blocks=256 physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 Intel/Sharp Extended Query Table at 0x0031 Using buffer write method erase region 0: offset=0x0,size=0x40000,blocks=256 Concatenating MTD devices: (0): "0.flash" (1): "0.flash" into device "0.flash" sda: detected capacity change from 0 to 268435456 sd 0:0:0:0: [sda] Attached SCSI disk libphy: Fixed MDIO Bus: probed tun: Universal TUN/TAP device driver, 1.6 thunder_xcv, ver 1.0 thunder_bgx, ver 1.0 nicpf, ver 1.0 hclge is initializing hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version hns3: Copyright (c) 2017 Huawei Corporation. e1000: Intel(R) PRO/1000 Network Driver e1000: Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver e1000e: Copyright(c) 1999 - 2015 Intel Corporation. igb: Intel(R) Gigabit Ethernet Network Driver igb: Copyright (c) 2007-2014 Intel Corporation. igbvf: Intel(R) Gigabit Virtual Function Network Driver igbvf: Copyright (c) 2009 - 2012 Intel Corporation. sky2: driver version 1.30 VFIO - User Level meta-driver version: 0.3 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-orion: EHCI orion driver ehci-exynos: EHCI Exynos driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-exynos: OHCI Exynos driver usbcore: registered new interface driver usb-storage rtc-pl031 9010000.pl031: registered as rtc0 rtc-pl031 9010000.pl031: setting system clock to 2020-11-25T09:39:22 UTC (1606297162) i2c /dev entries driver sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman Synopsys Designware Multimedia Card Interface Driver sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver drop_monitor: Initializing network drop monitor service NET: Registered protocol family 17 9pnet: Installing 9P2000 support Key type dns_resolver registered registered taskstats version 1 Running tests on all trace events: Testing all events: OK Running tests again, along with the function tracer Running tests on all trace events: Testing all events: hrtimer: interrupt took 11560624 ns OK Testing ftrace filter: OK Loading compiled-in X.509 certificates input: gpio-keys as /devices/platform/gpio-keys/input/input0 ALSA device list: No soundcards found. TAP version 14 1..0 uart-pl011 9000000.pl011: no DMA platform data EXT4-fs (sda): mounting ext3 file system using the ext4 subsystem EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext3 filesystem) readonly on device 8:0. devtmpfs: mounted Freeing unused kernel memory: 8896K Run /sbin/init as init process with arguments: /sbin/init with environment: HOME=/ TERM=linux earlyprintk=serial EXT4-fs (sda): re-mounted. Opts: (null) ext3 filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) random: crng init done