[PATCH 1/8] clk: sunxi-ng: h6: Fix clock divider range on some clocks

[Andre Przywara <andre.przywara@arm.com>]

While comparing clocks between the H6 and H616, some of the M factor
ranges were found to be wrong: the manual says they are only covering
two bits [1:0], but our code had "5" in the number-of-bits field.

By writing 0xff into that register in U-Boot and via FEL, it could be
confirmed that bits [4:2] are indeed masked off, so the manual is right.

Change to number of bits in the affected clock's description.

Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
index f2497d0a4683..d0565d378ea2 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -237,7 +237,7 @@ static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k",
 static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
 			     psi_ahb1_ahb2_parents,
 			     0x510,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
@@ -246,19 +246,19 @@ static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k",
 						       "psi-ahb1-ahb2",
 						       "pll-periph0" };
 static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
 
 static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
 
 static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
-- 
2.17.5