linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marcin Wojtas <mw@semihalf.com>
To: linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org
Cc: ulf.hansson@linaro.org, huziji@marvell.com,
	adrian.hunter@intel.com, jaz@semihalf.com, tn@semihalf.com,
	ard.biesheuvel@arm.com, kostap@marvell.com,
	Marcin Wojtas <mw@semihalf.com>
Subject: [PATCH v4 2/4] mmc: sdhci-xenon: switch to device_* API
Date: Fri,  4 Dec 2020 18:16:24 +0100	[thread overview]
Message-ID: <20201204171626.10935-3-mw@semihalf.com> (raw)
In-Reply-To: <20201204171626.10935-1-mw@semihalf.com>

In order to support both ACPI and DT, modify the driver
to use device_* routines for obtaining the properties
values.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
 drivers/mmc/host/sdhci-xenon.h     |  4 +--
 drivers/mmc/host/sdhci-xenon-phy.c | 36 +++++++++++---------
 drivers/mmc/host/sdhci-xenon.c     | 18 +++++-----
 3 files changed, 30 insertions(+), 28 deletions(-)

diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
index 39e898605937..3e9c6c908a79 100644
--- a/drivers/mmc/host/sdhci-xenon.h
+++ b/drivers/mmc/host/sdhci-xenon.h
@@ -101,8 +101,8 @@ struct xenon_priv {
 };
 
 int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
-int xenon_phy_parse_dt(struct device_node *np,
-		       struct sdhci_host *host);
+int xenon_phy_parse_params(struct device *dev,
+			   struct sdhci_host *host);
 void xenon_soc_pad_ctrl(struct sdhci_host *host,
 			unsigned char signal_voltage);
 #endif
diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
index c33e0cddc81a..8cf3a375de65 100644
--- a/drivers/mmc/host/sdhci-xenon-phy.c
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -691,35 +691,37 @@ static int get_dt_pad_ctrl_data(struct sdhci_host *host,
 	return ret;
 }
 
-static int xenon_emmc_phy_parse_param_dt(struct sdhci_host *host,
-					 struct device_node *np,
-					 struct xenon_emmc_phy_params *params)
+static int xenon_emmc_phy_parse_params(struct sdhci_host *host,
+				       struct device *dev,
+				       struct xenon_emmc_phy_params *params)
 {
 	u32 value;
 
 	params->slow_mode = false;
-	if (of_property_read_bool(np, "marvell,xenon-phy-slow-mode"))
+	if (device_property_read_bool(dev, "marvell,xenon-phy-slow-mode"))
 		params->slow_mode = true;
 
 	params->znr = XENON_ZNR_DEF_VALUE;
-	if (!of_property_read_u32(np, "marvell,xenon-phy-znr", &value))
+	if (!device_property_read_u32(dev, "marvell,xenon-phy-znr", &value))
 		params->znr = value & XENON_ZNR_MASK;
 
 	params->zpr = XENON_ZPR_DEF_VALUE;
-	if (!of_property_read_u32(np, "marvell,xenon-phy-zpr", &value))
+	if (!device_property_read_u32(dev, "marvell,xenon-phy-zpr", &value))
 		params->zpr = value & XENON_ZPR_MASK;
 
 	params->nr_tun_times = XENON_TUN_CONSECUTIVE_TIMES;
-	if (!of_property_read_u32(np, "marvell,xenon-phy-nr-success-tun",
-				  &value))
+	if (!device_property_read_u32(dev, "marvell,xenon-phy-nr-success-tun",
+				      &value))
 		params->nr_tun_times = value & XENON_TUN_CONSECUTIVE_TIMES_MASK;
 
 	params->tun_step_divider = XENON_TUNING_STEP_DIVIDER;
-	if (!of_property_read_u32(np, "marvell,xenon-phy-tun-step-divider",
-				  &value))
+	if (!device_property_read_u32(dev, "marvell,xenon-phy-tun-step-divider",
+				      &value))
 		params->tun_step_divider = value & 0xFF;
 
-	return get_dt_pad_ctrl_data(host, np, params);
+	if (dev->of_node)
+		return get_dt_pad_ctrl_data(host, dev->of_node, params);
+	return 0;
 }
 
 /* Set SoC PHY Voltage PAD */
@@ -813,7 +815,7 @@ int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios)
 	return ret;
 }
 
-static int xenon_add_phy(struct device_node *np, struct sdhci_host *host,
+static int xenon_add_phy(struct device *dev, struct sdhci_host *host,
 			 const char *phy_name)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -832,15 +834,15 @@ static int xenon_add_phy(struct device_node *np, struct sdhci_host *host,
 	if (ret)
 		return ret;
 
-	return xenon_emmc_phy_parse_param_dt(host, np, priv->phy_params);
+	return xenon_emmc_phy_parse_params(host, dev, priv->phy_params);
 }
 
-int xenon_phy_parse_dt(struct device_node *np, struct sdhci_host *host)
+int xenon_phy_parse_params(struct device *dev, struct sdhci_host *host)
 {
 	const char *phy_type = NULL;
 
-	if (!of_property_read_string(np, "marvell,xenon-phy-type", &phy_type))
-		return xenon_add_phy(np, host, phy_type);
+	if (!device_property_read_string(dev, "marvell,xenon-phy-type", &phy_type))
+		return xenon_add_phy(dev, host, phy_type);
 
-	return xenon_add_phy(np, host, "emmc 5.1 phy");
+	return xenon_add_phy(dev, host, "emmc 5.1 phy");
 }
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 1e7ce9b1a143..bfc76b0e3eaa 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -407,9 +407,9 @@ static void xenon_replace_mmc_host_ops(struct sdhci_host *host)
  *	    Refer to XENON_SYS_CFG_INFO register
  * tun-count: the interval between re-tuning
  */
-static int xenon_probe_dt(struct platform_device *pdev)
+static int xenon_probe_params(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
 	struct sdhci_host *host = platform_get_drvdata(pdev);
 	struct mmc_host *mmc = host->mmc;
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -422,7 +422,7 @@ static int xenon_probe_dt(struct platform_device *pdev)
 		host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
 
 	sdhc_id = 0x0;
-	if (!of_property_read_u32(np, "marvell,xenon-sdhc-id", &sdhc_id)) {
+	if (!device_property_read_u32(dev, "marvell,xenon-sdhc-id", &sdhc_id)) {
 		nr_sdhc = sdhci_readl(host, XENON_SYS_CFG_INFO);
 		nr_sdhc &= XENON_NR_SUPPORTED_SLOT_MASK;
 		if (unlikely(sdhc_id > nr_sdhc)) {
@@ -434,8 +434,8 @@ static int xenon_probe_dt(struct platform_device *pdev)
 	priv->sdhc_id = sdhc_id;
 
 	tuning_count = XENON_DEF_TUNING_COUNT;
-	if (!of_property_read_u32(np, "marvell,xenon-tun-count",
-				  &tuning_count)) {
+	if (!device_property_read_u32(dev, "marvell,xenon-tun-count",
+				      &tuning_count)) {
 		if (unlikely(tuning_count >= XENON_TMR_RETUN_NO_PRESENT)) {
 			dev_err(mmc_dev(mmc), "Wrong Re-tuning Count. Set default value %d\n",
 				XENON_DEF_TUNING_COUNT);
@@ -444,7 +444,7 @@ static int xenon_probe_dt(struct platform_device *pdev)
 	}
 	priv->tuning_count = tuning_count;
 
-	return xenon_phy_parse_dt(np, host);
+	return xenon_phy_parse_params(dev, host);
 }
 
 static int xenon_sdhc_prepare(struct sdhci_host *host)
@@ -528,12 +528,12 @@ static int xenon_probe(struct platform_device *pdev)
 	if (err)
 		goto err_clk_axi;
 
-	sdhci_get_of_property(pdev);
+	sdhci_get_property(pdev);
 
 	xenon_set_acg(host, false);
 
-	/* Xenon specific dt parse */
-	err = xenon_probe_dt(pdev);
+	/* Xenon specific parameters parse */
+	err = xenon_probe_params(pdev);
 	if (err)
 		goto err_clk_axi;
 
-- 
2.29.0


  parent reply	other threads:[~2020-12-04 17:19 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-04 17:16 [PATCH v4 0/4] sdhci-xenon ACPI support Marcin Wojtas
2020-12-04 17:16 ` [PATCH v4 1/4] mmc: sdhci-xenon: use match data for controllers variants Marcin Wojtas
2020-12-04 17:16 ` Marcin Wojtas [this message]
2020-12-04 17:16 ` [PATCH v4 3/4] mmc: sdhci-xenon: use clk only with DT Marcin Wojtas
2020-12-04 17:16 ` [PATCH v4 4/4] mmc: sdhci-xenon: introduce ACPI support Marcin Wojtas
2020-12-11 13:46 ` [PATCH v4 0/4] sdhci-xenon " Ulf Hansson
2020-12-11 13:53   ` Marcin Wojtas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201204171626.10935-3-mw@semihalf.com \
    --to=mw@semihalf.com \
    --cc=adrian.hunter@intel.com \
    --cc=ard.biesheuvel@arm.com \
    --cc=huziji@marvell.com \
    --cc=jaz@semihalf.com \
    --cc=kostap@marvell.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=tn@semihalf.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).