From: Troy Lee <troy_lee@aspeedtech.com>
To: Stefan Schaeckeler <sschaeck@cisco.com>,
Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@aj.id.au>,
"Borislav Petkov" <bp@alien8.de>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Tony Luck <tony.luck@intel.com>,
James Morse <james.morse@arm.com>,
Robert Richter <rric@kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-arm-kernel@lists.infradead.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-aspeed@lists.ozlabs.org>,
open list <linux-kernel@vger.kernel.org>,
"open list:EDAC-CORE" <linux-edac@vger.kernel.org>
Cc: <leetroy@gmail.com>, <troy_lee@aspeedtech.com>,
<ryan_chen@aspeedtech.com>
Subject: [PATCH v4 1/3] dt-bindings: edac: aspeed-sdram-edac: Add ast2400/ast2600 support
Date: Mon, 7 Dec 2020 17:00:11 +0800 [thread overview]
Message-ID: <20201207090013.14145-1-troy_lee@aspeedtech.com> (raw)
Adding Aspeed AST2400 and AST2600 binding for edac driver.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Acked-by: Joel Stanley <joel@jms.id.au>
---
.../devicetree/bindings/edac/aspeed-sdram-edac.txt | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
index 6a0f3d90d682..8ca9e0a049d8 100644
--- a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
+++ b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
@@ -1,6 +1,6 @@
-Aspeed AST2500 SoC EDAC node
+Aspeed BMC SoC EDAC node
-The Aspeed AST2500 SoC supports DDR3 and DDR4 memory with and without ECC (error
+The Aspeed BMC SoC supports DDR3 and DDR4 memory with and without ECC (error
correction check).
The memory controller supports SECDED (single bit error correction, double bit
@@ -11,7 +11,10 @@ Note, the bootloader must configure ECC mode in the memory controller.
Required properties:
-- compatible: should be "aspeed,ast2500-sdram-edac"
+- compatible: should be one of
+ - "aspeed,ast2400-sdram-edac"
+ - "aspeed,ast2500-sdram-edac"
+ - "aspeed,ast2600-sdram-edac"
- reg: sdram controller register set should be <0x1e6e0000 0x174>
- interrupts: should be AVIC interrupt #0
--
2.17.1
next reply other threads:[~2020-12-07 9:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-07 9:00 Troy Lee [this message]
2020-12-07 9:00 ` [PATCH v4 2/3] ARM: dts: aspeed: Add AST2600 edac into common devicetree Troy Lee
2020-12-07 9:00 ` [PATCH v4 3/3] edac: Supporting AST2400 and AST2600 edac driver Troy Lee
2020-12-07 9:10 ` Stefan Schaeckeler (sschaeck)
2020-12-07 11:53 ` Joel Stanley
2020-12-07 11:11 ` [PATCH v4 1/3] dt-bindings: edac: aspeed-sdram-edac: Add ast2400/ast2600 support Borislav Petkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201207090013.14145-1-troy_lee@aspeedtech.com \
--to=troy_lee@aspeedtech.com \
--cc=andrew@aj.id.au \
--cc=bp@alien8.de \
--cc=devicetree@vger.kernel.org \
--cc=james.morse@arm.com \
--cc=joel@jms.id.au \
--cc=leetroy@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=rric@kernel.org \
--cc=ryan_chen@aspeedtech.com \
--cc=sschaeck@cisco.com \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).