From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Guido Günther" <agx@sigxcpu.org>,
"Matti Vaittinen" <matti.vaittinen@fi.rohmeurope.com>,
"Mark Brown" <broonie@kernel.org>,
"Sasha Levin" <sashal@kernel.org>,
linux-power@fi.rohmeurope.com
Subject: [PATCH AUTOSEL 5.10 13/51] regulator: bd718x7: Add enable times
Date: Tue, 12 Jan 2021 07:54:55 -0500 [thread overview]
Message-ID: <20210112125534.70280-13-sashal@kernel.org> (raw)
In-Reply-To: <20210112125534.70280-1-sashal@kernel.org>
From: Guido Günther <agx@sigxcpu.org>
[ Upstream commit 3b66e4a8e58a85af3212c7117d7a29c9ef6679a2 ]
Use the typical startup times from the data sheet so boards get a
reasonable default. Not setting any enable time can lead to board hangs
when e.g. clocks are enabled too soon afterwards.
This fixes gpu power domain resume on the Librem 5.
[Moved #defines into driver, seems to be general agreement and avoids any
cross tree issues -- broonie]
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/41fb2ed19f584f138336344e2297ae7301f72b75.1608316658.git.agx@sigxcpu.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/bd718x7-regulator.c | 57 +++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c
index 0774467994fbe..3333b8905f1b7 100644
--- a/drivers/regulator/bd718x7-regulator.c
+++ b/drivers/regulator/bd718x7-regulator.c
@@ -15,6 +15,36 @@
#include <linux/regulator/of_regulator.h>
#include <linux/slab.h>
+/* Typical regulator startup times as per data sheet in uS */
+#define BD71847_BUCK1_STARTUP_TIME 144
+#define BD71847_BUCK2_STARTUP_TIME 162
+#define BD71847_BUCK3_STARTUP_TIME 162
+#define BD71847_BUCK4_STARTUP_TIME 240
+#define BD71847_BUCK5_STARTUP_TIME 270
+#define BD71847_BUCK6_STARTUP_TIME 200
+#define BD71847_LDO1_STARTUP_TIME 440
+#define BD71847_LDO2_STARTUP_TIME 370
+#define BD71847_LDO3_STARTUP_TIME 310
+#define BD71847_LDO4_STARTUP_TIME 400
+#define BD71847_LDO5_STARTUP_TIME 530
+#define BD71847_LDO6_STARTUP_TIME 400
+
+#define BD71837_BUCK1_STARTUP_TIME 160
+#define BD71837_BUCK2_STARTUP_TIME 180
+#define BD71837_BUCK3_STARTUP_TIME 180
+#define BD71837_BUCK4_STARTUP_TIME 180
+#define BD71837_BUCK5_STARTUP_TIME 160
+#define BD71837_BUCK6_STARTUP_TIME 240
+#define BD71837_BUCK7_STARTUP_TIME 220
+#define BD71837_BUCK8_STARTUP_TIME 200
+#define BD71837_LDO1_STARTUP_TIME 440
+#define BD71837_LDO2_STARTUP_TIME 370
+#define BD71837_LDO3_STARTUP_TIME 310
+#define BD71837_LDO4_STARTUP_TIME 400
+#define BD71837_LDO5_STARTUP_TIME 310
+#define BD71837_LDO6_STARTUP_TIME 400
+#define BD71837_LDO7_STARTUP_TIME 530
+
/*
* BD718(37/47/50) have two "enable control modes". ON/OFF can either be
* controlled by software - or by PMIC internal HW state machine. Whether
@@ -613,6 +643,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.vsel_mask = DVS_BUCK_RUN_MASK,
.enable_reg = BD718XX_REG_BUCK1_CTRL,
.enable_mask = BD718XX_BUCK_EN,
+ .enable_time = BD71847_BUCK1_STARTUP_TIME,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@@ -646,6 +677,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.vsel_mask = DVS_BUCK_RUN_MASK,
.enable_reg = BD718XX_REG_BUCK2_CTRL,
.enable_mask = BD718XX_BUCK_EN,
+ .enable_time = BD71847_BUCK2_STARTUP_TIME,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@@ -680,6 +712,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.linear_range_selectors = bd71847_buck3_volt_range_sel,
.enable_reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
.enable_mask = BD718XX_BUCK_EN,
+ .enable_time = BD71847_BUCK3_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -706,6 +739,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.vsel_range_mask = BD71847_BUCK4_RANGE_MASK,
.linear_range_selectors = bd71847_buck4_volt_range_sel,
.enable_mask = BD718XX_BUCK_EN,
+ .enable_time = BD71847_BUCK4_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -727,6 +761,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.vsel_mask = BD718XX_3RD_NODVS_BUCK_MASK,
.enable_reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
.enable_mask = BD718XX_BUCK_EN,
+ .enable_time = BD71847_BUCK5_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -750,6 +785,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.vsel_mask = BD718XX_4TH_NODVS_BUCK_MASK,
.enable_reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
.enable_mask = BD718XX_BUCK_EN,
+ .enable_time = BD71847_BUCK6_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -775,6 +811,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.linear_range_selectors = bd718xx_ldo1_volt_range_sel,
.enable_reg = BD718XX_REG_LDO1_VOLT,
.enable_mask = BD718XX_LDO_EN,
+ .enable_time = BD71847_LDO1_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -796,6 +833,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.n_voltages = ARRAY_SIZE(ldo_2_volts),
.enable_reg = BD718XX_REG_LDO2_VOLT,
.enable_mask = BD718XX_LDO_EN,
+ .enable_time = BD71847_LDO2_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -818,6 +856,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.vsel_mask = BD718XX_LDO3_MASK,
.enable_reg = BD718XX_REG_LDO3_VOLT,
.enable_mask = BD718XX_LDO_EN,
+ .enable_time = BD71847_LDO3_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -840,6 +879,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.vsel_mask = BD718XX_LDO4_MASK,
.enable_reg = BD718XX_REG_LDO4_VOLT,
.enable_mask = BD718XX_LDO_EN,
+ .enable_time = BD71847_LDO4_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -865,6 +905,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.linear_range_selectors = bd71847_ldo5_volt_range_sel,
.enable_reg = BD718XX_REG_LDO5_VOLT,
.enable_mask = BD718XX_LDO_EN,
+ .enable_time = BD71847_LDO5_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -889,6 +930,7 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.vsel_mask = BD718XX_LDO6_MASK,
.enable_reg = BD718XX_REG_LDO6_VOLT,
.enable_mask = BD718XX_LDO_EN,
+ .enable_time = BD71847_LDO6_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -942,6 +984,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = DVS_BUCK_RUN_MASK,
.enable_reg = BD718XX_REG_BUCK1_CTRL,
.enable_mask = BD718XX_BUCK_EN,
+ .enable_time = BD71837_BUCK1_STARTUP_TIME,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@@ -975,6 +1018,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = DVS_BUCK_RUN_MASK,
.enable_reg = BD718XX_REG_BUCK2_CTRL,
.enable_mask = BD718XX_BUCK_EN,
+ .enable_time = BD71837_BUCK2_STARTUP_TIME,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@@ -1005,6 +1049,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = DVS_BUCK_RUN_MASK,
.enable_reg = BD71837_REG_BUCK3_CTRL,
.enable_mask = BD718XX_BUCK_EN,
+ .enable_time = BD71837_BUCK3_STARTUP_TIME,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@@ -1033,6 +1078,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = DVS_BUCK_RUN_MASK,
.enable_reg = BD71837_REG_BUCK4_CTRL,
.enable_mask = BD718XX_BUCK_EN,
+ .enable_time = BD71837_BUCK4_STARTUP_TIME,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@@ -1065,6 +1111,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.linear_range_selectors = bd71837_buck5_volt_range_sel,
.enable_reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
.enable_mask = BD718XX_BUCK_EN,
+ .enable_time = BD71837_BUCK5_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -1088,6 +1135,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = BD71837_BUCK6_MASK,
.enable_reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL,
.enable_mask = BD718XX_BUCK_EN,
+ .enable_time = BD71837_BUCK6_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -1109,6 +1157,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = BD718XX_3RD_NODVS_BUCK_MASK,
.enable_reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
.enable_mask = BD718XX_BUCK_EN,
+ .enable_time = BD71837_BUCK7_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -1132,6 +1181,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = BD718XX_4TH_NODVS_BUCK_MASK,
.enable_reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
.enable_mask = BD718XX_BUCK_EN,
+ .enable_time = BD71837_BUCK8_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -1157,6 +1207,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.linear_range_selectors = bd718xx_ldo1_volt_range_sel,
.enable_reg = BD718XX_REG_LDO1_VOLT,
.enable_mask = BD718XX_LDO_EN,
+ .enable_time = BD71837_LDO1_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -1178,6 +1229,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.n_voltages = ARRAY_SIZE(ldo_2_volts),
.enable_reg = BD718XX_REG_LDO2_VOLT,
.enable_mask = BD718XX_LDO_EN,
+ .enable_time = BD71837_LDO2_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -1200,6 +1252,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = BD718XX_LDO3_MASK,
.enable_reg = BD718XX_REG_LDO3_VOLT,
.enable_mask = BD718XX_LDO_EN,
+ .enable_time = BD71837_LDO3_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -1222,6 +1275,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = BD718XX_LDO4_MASK,
.enable_reg = BD718XX_REG_LDO4_VOLT,
.enable_mask = BD718XX_LDO_EN,
+ .enable_time = BD71837_LDO4_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -1246,6 +1300,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = BD71837_LDO5_MASK,
.enable_reg = BD718XX_REG_LDO5_VOLT,
.enable_mask = BD718XX_LDO_EN,
+ .enable_time = BD71837_LDO5_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -1272,6 +1327,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = BD718XX_LDO6_MASK,
.enable_reg = BD718XX_REG_LDO6_VOLT,
.enable_mask = BD718XX_LDO_EN,
+ .enable_time = BD71837_LDO6_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
@@ -1296,6 +1352,7 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.vsel_mask = BD71837_LDO7_MASK,
.enable_reg = BD71837_REG_LDO7_VOLT,
.enable_mask = BD718XX_LDO_EN,
+ .enable_time = BD71837_LDO7_STARTUP_TIME,
.owner = THIS_MODULE,
},
.init = {
--
2.27.0
next prev parent reply other threads:[~2021-01-12 12:57 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-12 12:54 [PATCH AUTOSEL 5.10 01/51] ARC: build: remove non-existing bootpImage from KBUILD_IMAGE Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 02/51] ARC: build: add uImage.lzma to the top-level target Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 03/51] ARC: build: add boot_targets to PHONY Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 04/51] ARC: build: move symlink creation to arch/arc/Makefile to avoid race Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 05/51] ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875 Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 06/51] ath11k: fix crash caused by NULL rx_channel Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 07/51] rtlwifi: rise completion at the last step of firmware callback Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 08/51] netfilter: ipset: fixes possible oops in mtype_resize Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 09/51] ath11k: qmi: try to allocate a big block of DMA memory first Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 10/51] btrfs: fix async discard stall Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 11/51] btrfs: merge critical sections of discard lock in workfn Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 12/51] btrfs: fix transaction leak and crash after RO remount caused by qgroup rescan Sasha Levin
2021-01-12 12:54 ` Sasha Levin [this message]
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 14/51] ethernet: ucc_geth: fix definition and size of ucc_geth_tx_global_pram Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 15/51] ARM: dts: ux500/golden: Set display max brightness Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 16/51] qede: fix offload for IPIP tunnel packets Sasha Levin
2021-01-12 12:54 ` [PATCH AUTOSEL 5.10 17/51] stmmac: intel: Add PCI IDs for TGL-H platform Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 18/51] e1000e: Only run S0ix flows if shutdown succeeded Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 19/51] habanalabs: adjust pci controller init to new firmware Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 20/51] habanalabs/gaudi: retry loading TPC f/w on -EINTR Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 21/51] habanalabs: register to pci shutdown callback Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 22/51] staging: spmi: hisi-spmi-controller: Fix some error handling paths Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 23/51] CDC-NCM: remove "connected" log message Sasha Levin
2021-01-12 13:11 ` Greg Kroah-Hartman
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 24/51] spi: altera: fix return value for altera_spi_txrx() Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 25/51] habanalabs: Fix memleak in hl_device_reset Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 26/51] hwmon: (pwm-fan) Ensure that calculation doesn't discard big period values Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 27/51] lib/raid6: Let $(UNROLL) rules work with macOS userland Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 28/51] kconfig: remove 'kvmconfig' and 'xenconfig' shorthands Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 29/51] spi: fix the divide by 0 error when calculating xfer waiting time Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 30/51] dmaengine: stm32-mdma: fix STM32_MDMA_VERY_HIGH_PRIORITY value Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 31/51] net: usb: qmi_wwan: add Quectel EM160R-GL Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 32/51] io_uring: drop file refs after task cancel Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 33/51] bfq: Fix computation of shallow depth Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 34/51] arch/arc: add copy_user_page() to <asm/page.h> to fix build error on ARC Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 35/51] misdn: dsp: select CONFIG_BITREVERSE Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 36/51] net: ethernet: fs_enet: Add missing MODULE_LICENSE Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 37/51] selftests: fix the return value for UDP GRO test Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 38/51] nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 39/51] nvme: avoid possible double fetch in handling CQE Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 40/51] nvmet-rdma: Fix list_del corruption on queue establishment failure Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 41/51] drm/amd/display: fix sysfs amdgpu_current_backlight_pwm NULL pointer issue Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 42/51] drm/amdgpu: fix a GPU hang issue when remove device Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 43/51] drm/amd/pm: fix the failure when change power profile for renoir Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 44/51] drm/amdgpu: fix potential memory leak during navi12 deinitialization Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 45/51] gcc-plugins: fix gcc 11 indigestion with plugins Sasha Levin
2021-01-12 17:31 ` Kees Cook
2021-01-17 16:18 ` Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 46/51] usb: typec: Fix copy paste error for NVIDIA alt-mode description Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 47/51] iommu/vt-d: Fix lockdep splat in sva bind()/unbind() Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 48/51] ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 49/51] drm/msm: Call msm_init_vram before binding the gpu Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 50/51] ARM: picoxcell: fix missing interrupt-parent properties Sasha Levin
2021-01-12 12:55 ` [PATCH AUTOSEL 5.10 51/51] poll: fix performance regression due to out-of-line __put_user() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210112125534.70280-13-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=agx@sigxcpu.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-power@fi.rohmeurope.com \
--cc=matti.vaittinen@fi.rohmeurope.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).