From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Michael Chan <mchan@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com (open list:BROADCOM
ETHERNET PHY DRIVERS), linux-kernel@vger.kernel.org (open list),
olteanv@gmail.com, michael@walle.cc
Subject: [PATCH net-next v2 3/3] net: phy: broadcom: Allow BCM54210E to configure APD
Date: Fri, 12 Feb 2021 19:46:32 -0800 [thread overview]
Message-ID: <20210213034632.2420998-4-f.fainelli@gmail.com> (raw)
In-Reply-To: <20210213034632.2420998-1-f.fainelli@gmail.com>
BCM54210E/BCM50212E has been verified to work correctly with the
auto-power down configuration done by bcm54xx_adjust_rxrefclk(), add it
to the list of PHYs working.
While we are at it, provide an appropriate name for the bit we are
changing which disables the RXC and TXC during auto-power down when
there is no energy on the cable.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/phy/broadcom.c | 8 +++++---
include/linux/brcmphy.h | 2 +-
2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 3ce266ab521b..91fbd26c809e 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -193,6 +193,7 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 &&
BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 &&
BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M &&
+ BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54210E &&
BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54810 &&
BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54811)
return;
@@ -227,9 +228,10 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
if (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) {
- if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810 ||
- BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54811)
- val |= BCM54810_SHD_SCR3_TRDDAPD;
+ if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E ||
+ BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810 ||
+ BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E)
+ val |= BCM54XX_SHD_SCR3_RXCTXC_DIS;
else
val |= BCM54XX_SHD_SCR3_TRDDAPD;
}
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 844dcfe789a2..16597d3fa011 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -193,6 +193,7 @@
#define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001
#define BCM54XX_SHD_SCR3_DLLAPD_DIS 0x0002
#define BCM54XX_SHD_SCR3_TRDDAPD 0x0004
+#define BCM54XX_SHD_SCR3_RXCTXC_DIS 0x0100
/* 01010: Auto Power-Down */
#define BCM54XX_SHD_APD 0x0a
@@ -253,7 +254,6 @@
#define BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN (1 << 0)
#define BCM54810_SHD_CLK_CTL 0x3
#define BCM54810_SHD_CLK_CTL_GTXCLK_EN (1 << 9)
-#define BCM54810_SHD_SCR3_TRDDAPD 0x0100
/* BCM54612E Registers */
#define BCM54612E_EXP_SPARE0 (MII_BCM54XX_EXP_SEL_ETC + 0x34)
--
2.25.1
next prev parent reply other threads:[~2021-02-13 3:48 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-13 3:46 [PATCH net-next v2 0/3] net: phy: broadcom: Cleanups and APD Florian Fainelli
2021-02-13 3:46 ` [PATCH net-next v2 1/3] net: phy: broadcom: Avoid forward for bcm54xx_config_clock_delay() Florian Fainelli
2021-02-13 10:31 ` Vladimir Oltean
2021-02-13 3:46 ` [PATCH net-next v2 2/3] net: phy: broadcom: Remove unused flags Florian Fainelli
2021-02-13 10:33 ` Vladimir Oltean
2021-02-13 3:46 ` Florian Fainelli [this message]
2021-02-13 10:42 ` [PATCH net-next v2 3/3] net: phy: broadcom: Allow BCM54210E to configure APD Vladimir Oltean
2021-02-15 4:29 ` Florian Fainelli
2021-03-03 3:37 ` Florian Fainelli
2021-03-05 1:08 ` Vladimir Oltean
2021-03-06 4:26 ` Florian Fainelli
2021-02-15 23:20 ` [PATCH net-next v2 0/3] net: phy: broadcom: Cleanups and APD patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210213034632.2420998-4-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=davem@davemloft.net \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mchan@broadcom.com \
--cc=michael@walle.cc \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).