From: Alexandru Ardelean <alexandru.ardelean@analog.com>
To: <linux-kernel@vger.kernel.org>, <linux-iio@vger.kernel.org>
Cc: <lars@metafoo.de>, <Michael.Hennerich@analog.com>,
<jic23@kernel.org>, <nuno.sa@analog.com>,
<dragos.bogdan@analog.com>,
Alexandru Ardelean <alexandru.ardelean@analog.com>
Subject: [PATCH v3 3/6] iio: triggered-buffer: extend support to configure output buffers
Date: Fri, 19 Feb 2021 14:40:09 +0200 [thread overview]
Message-ID: <20210219124012.92897-4-alexandru.ardelean@analog.com> (raw)
In-Reply-To: <20210219124012.92897-1-alexandru.ardelean@analog.com>
Now that output (kfifo) buffers are supported, we need to extend the
{devm_}iio_triggered_buffer_setup_ext() parameter list to take a direction
parameter.
This allows us to attach an output triggered buffer to a DAC device.
Unfortunately it's a bit difficult to add another macro to avoid changing 5
drivers where {devm_}iio_triggered_buffer_setup_ext() is used.
Well, it's doable, but may not be worth the trouble vs just updating all
these 5 drivers.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/iio/accel/adxl372.c | 1 +
drivers/iio/accel/bmc150-accel-core.c | 1 +
drivers/iio/adc/at91-sama5d2_adc.c | 4 ++--
drivers/iio/buffer/industrialio-triggered-buffer.c | 8 ++++++--
.../iio/common/cros_ec_sensors/cros_ec_sensors_core.c | 1 +
drivers/iio/common/hid-sensors/hid-sensor-trigger.c | 5 +++--
include/linux/iio/triggered_buffer.h | 11 +++++++++--
7 files changed, 23 insertions(+), 8 deletions(-)
diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c
index 8ba1453b8dbf..f2e077f72531 100644
--- a/drivers/iio/accel/adxl372.c
+++ b/drivers/iio/accel/adxl372.c
@@ -1214,6 +1214,7 @@ int adxl372_probe(struct device *dev, struct regmap *regmap,
ret = devm_iio_triggered_buffer_setup_ext(dev,
indio_dev, NULL,
adxl372_trigger_handler,
+ IIO_BUFFER_DIRECTION_IN,
&adxl372_buffer_ops,
adxl372_fifo_attributes);
if (ret < 0)
diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
index b0dbd12cbf42..3e0305b0065b 100644
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -1743,6 +1743,7 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
ret = iio_triggered_buffer_setup_ext(indio_dev,
&iio_pollfunc_store_time,
bmc150_accel_trigger_handler,
+ IIO_BUFFER_DIRECTION_IN,
&bmc150_accel_buffer_ops,
fifo_attrs);
if (ret < 0) {
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index a7826f097b95..fc134f9c0200 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -1680,8 +1680,8 @@ static int at91_adc_buffer_and_trigger_init(struct device *dev,
fifo_attrs = NULL;
ret = devm_iio_triggered_buffer_setup_ext(&indio->dev, indio,
- &iio_pollfunc_store_time,
- &at91_adc_trigger_handler, &at91_buffer_setup_ops, fifo_attrs);
+ &iio_pollfunc_store_time, &at91_adc_trigger_handler,
+ IIO_BUFFER_DIRECTION_IN, &at91_buffer_setup_ops, fifo_attrs);
if (ret < 0) {
dev_err(dev, "couldn't initialize the buffer.\n");
return ret;
diff --git a/drivers/iio/buffer/industrialio-triggered-buffer.c b/drivers/iio/buffer/industrialio-triggered-buffer.c
index b2b1b7d27af4..f400e978cd1e 100644
--- a/drivers/iio/buffer/industrialio-triggered-buffer.c
+++ b/drivers/iio/buffer/industrialio-triggered-buffer.c
@@ -19,6 +19,7 @@
* @indio_dev: IIO device structure
* @h: Function which will be used as pollfunc top half
* @thread: Function which will be used as pollfunc bottom half
+ * @direction: Direction of the data stream (in/out).
* @setup_ops: Buffer setup functions to use for this device.
* If NULL the default setup functions for triggered
* buffers will be used.
@@ -38,6 +39,7 @@
int iio_triggered_buffer_setup_ext(struct iio_dev *indio_dev,
irqreturn_t (*h)(int irq, void *p),
irqreturn_t (*thread)(int irq, void *p),
+ enum iio_buffer_direction direction,
const struct iio_buffer_setup_ops *setup_ops,
const struct attribute **buffer_attrs)
{
@@ -68,6 +70,7 @@ int iio_triggered_buffer_setup_ext(struct iio_dev *indio_dev,
/* Flag that polled ring buffering is possible */
indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
+ buffer->direction = direction;
buffer->attrs = buffer_attrs;
ret = iio_device_attach_buffer(indio_dev, buffer);
@@ -105,6 +108,7 @@ int devm_iio_triggered_buffer_setup_ext(struct device *dev,
struct iio_dev *indio_dev,
irqreturn_t (*h)(int irq, void *p),
irqreturn_t (*thread)(int irq, void *p),
+ enum iio_buffer_direction direction,
const struct iio_buffer_setup_ops *ops,
const struct attribute **buffer_attrs)
{
@@ -118,8 +122,8 @@ int devm_iio_triggered_buffer_setup_ext(struct device *dev,
*ptr = indio_dev;
- ret = iio_triggered_buffer_setup_ext(indio_dev, h, thread, ops,
- buffer_attrs);
+ ret = iio_triggered_buffer_setup_ext(indio_dev, h, thread, direction,
+ ops, buffer_attrs);
if (!ret)
devres_add(dev, ptr);
else
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index f8824afe595e..afe8917f8c49 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -369,6 +369,7 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
*/
ret = devm_iio_triggered_buffer_setup_ext(
dev, indio_dev, NULL, trigger_capture,
+ IIO_BUFFER_DIRECTION_IN,
NULL, fifo_attrs);
if (ret)
return ret;
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index 064c32bec9c7..dfaadbcac08a 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -248,8 +248,9 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
fifo_attrs = NULL;
ret = iio_triggered_buffer_setup_ext(indio_dev,
- &iio_pollfunc_store_time,
- NULL, NULL, fifo_attrs);
+ &iio_pollfunc_store_time, NULL,
+ IIO_BUFFER_DIRECTION_IN,
+ NULL, fifo_attrs);
if (ret) {
dev_err(&indio_dev->dev, "Triggered Buffer Setup Failed\n");
return ret;
diff --git a/include/linux/iio/triggered_buffer.h b/include/linux/iio/triggered_buffer.h
index 7f154d1f8739..7490b05fc5b2 100644
--- a/include/linux/iio/triggered_buffer.h
+++ b/include/linux/iio/triggered_buffer.h
@@ -2,6 +2,7 @@
#ifndef _LINUX_IIO_TRIGGERED_BUFFER_H_
#define _LINUX_IIO_TRIGGERED_BUFFER_H_
+#include <linux/iio/buffer.h>
#include <linux/interrupt.h>
struct attribute;
@@ -11,21 +12,27 @@ struct iio_buffer_setup_ops;
int iio_triggered_buffer_setup_ext(struct iio_dev *indio_dev,
irqreturn_t (*h)(int irq, void *p),
irqreturn_t (*thread)(int irq, void *p),
+ enum iio_buffer_direction direction,
const struct iio_buffer_setup_ops *setup_ops,
const struct attribute **buffer_attrs);
void iio_triggered_buffer_cleanup(struct iio_dev *indio_dev);
#define iio_triggered_buffer_setup(indio_dev, h, thread, setup_ops) \
- iio_triggered_buffer_setup_ext((indio_dev), (h), (thread), (setup_ops), NULL)
+ iio_triggered_buffer_setup_ext((indio_dev), (h), (thread), \
+ IIO_BUFFER_DIRECTION_IN, (setup_ops), \
+ NULL)
int devm_iio_triggered_buffer_setup_ext(struct device *dev,
struct iio_dev *indio_dev,
irqreturn_t (*h)(int irq, void *p),
irqreturn_t (*thread)(int irq, void *p),
+ enum iio_buffer_direction direction,
const struct iio_buffer_setup_ops *ops,
const struct attribute **buffer_attrs);
#define devm_iio_triggered_buffer_setup(dev, indio_dev, h, thread, setup_ops) \
- devm_iio_triggered_buffer_setup_ext((dev), (indio_dev), (h), (thread), (setup_ops), NULL)
+ devm_iio_triggered_buffer_setup_ext((dev), (indio_dev), (h), (thread), \
+ IIO_BUFFER_DIRECTION_IN, \
+ (setup_ops), NULL)
#endif
--
2.27.0
next prev parent reply other threads:[~2021-02-19 12:41 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-19 12:40 [PATCH v3 0/6] iio: Add output buffer support Alexandru Ardelean
2021-02-19 12:40 ` [PATCH v3 1/6] " Alexandru Ardelean
2021-02-19 12:40 ` [PATCH v3 2/6] iio: kfifo-buffer: " Alexandru Ardelean
2021-02-19 12:40 ` Alexandru Ardelean [this message]
2021-02-19 12:40 ` [PATCH v3 4/6] iio: buffer-dma: Allow to provide custom buffer ops Alexandru Ardelean
2021-02-19 12:40 ` [PATCH v3 5/6] iio: buffer-dma: Add output buffer support Alexandru Ardelean
2021-02-19 12:40 ` [PATCH v3 6/6] iio: buffer-dma: add support for cyclic DMA transfers Alexandru Ardelean
2021-02-21 12:09 ` Jonathan Cameron
2021-02-23 6:34 ` Alexandru Ardelean
2021-02-21 12:01 ` [PATCH v3 0/6] iio: Add output buffer support Jonathan Cameron
2021-03-05 8:57 ` Hennerich, Michael
2021-03-06 17:34 ` Jonathan Cameron
2021-03-08 10:07 ` Sa, Nuno
2021-03-08 11:52 ` Jonathan Cameron
2021-03-08 13:00 ` Sa, Nuno
2021-03-08 13:17 ` Sa, Nuno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210219124012.92897-4-alexandru.ardelean@analog.com \
--to=alexandru.ardelean@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=dragos.bogdan@analog.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).