Re: [PATCH 05/16] media: i2c: rdacm20: Check return values

[Jacopo Mondi <jacopo@jmondi.org>]

Hi

On Mon, Feb 22, 2021 at 03:09:26AM +0200, Laurent Pinchart wrote:
> Hi Jacopo,
>
> Thank you for the patch.
>
> On Tue, Feb 16, 2021 at 06:41:35PM +0100, Jacopo Mondi wrote:
> > The camera module initialization routine does not check the return
> > value of a few functions. Fix that.
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > ---
> >  drivers/media/i2c/rdacm20.c | 13 +++++++++----
> >  1 file changed, 9 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c
> > index 56406d82b5ac..e982373908f2 100644
> > --- a/drivers/media/i2c/rdacm20.c
> > +++ b/drivers/media/i2c/rdacm20.c
> > @@ -470,11 +470,16 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
> >  	 *  Ensure that we have a good link configuration before attempting to
> >  	 *  identify the device.
> >  	 */
> > -	max9271_configure_i2c(&dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
> > -						MAX9271_I2CSLVTO_1024US |
> > -						MAX9271_I2CMSTBT_105KBPS);
> > +	ret = max9271_configure_i2c(&dev->serializer,
> > +				    MAX9271_I2CSLVSH_469NS_234NS |
> > +				    MAX9271_I2CSLVTO_1024US |
> > +				    MAX9271_I2CMSTBT_105KBPS);
> > +	if (ret)
> > +		return ret;
> >
> > -	max9271_configure_gmsl_link(&dev->serializer);
> > +	ret = max9271_configure_gmsl_link(&dev->serializer);
> > +	if (ret)
> > +		return ret;
>
> This looks good, so
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> But it would be more useful if max9271_configure_gmsl_link() returned
> errors when I2C writes fail :-)
>

Indeed, I'll add a patch to report back errors on failed i2c writes.

Thanks
  j

> >
> >  	ret = max9271_verify_id(&dev->serializer);
> >  	if (ret < 0)
>
> --
> Regards,
>
> Laurent Pinchart