From: quanyang.wang@windriver.com
To: Hyun Kwon <hyun.kwon@xilinx.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Michal Simek <michal.simek@xilinx.com>
Cc: dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Quanyang Wang <quanyang.wang@windriver.com>
Subject: [V2][PATCH] drm: xlnx: zynqmp: release reset to DP controller before accessing DP registers
Date: Tue, 23 Mar 2021 10:55:01 +0800 [thread overview]
Message-ID: <20210323025501.1568039-1-quanyang.wang@windriver.com> (raw)
From: Quanyang Wang <quanyang.wang@windriver.com>
When insmod zynqmp-dpsub.ko after rmmod it, system will hang with the
error log as below:
root@xilinx-zynqmp:~# insmod zynqmp-dpsub.ko
[ 88.391289] [drm] Initialized zynqmp-dpsub 1.0.0 20130509 for fd4a0000.display on minor 0
[ 88.529906] Console: switching to colour frame buffer device 128x48
[ 88.549402] zynqmp-dpsub fd4a0000.display: [drm] fb0: zynqmp-dpsubdrm frame buffer device
[ 88.571624] zynqmp-dpsub fd4a0000.display: ZynqMP DisplayPort Subsystem driver probed
root@xilinx-zynqmp:~# rmmod zynqmp_dpsub
[ 94.023404] Console: switching to colour dummy device 80x25
root@xilinx-zynqmp:~# insmod zynqmp-dpsub.ko
<hang here>
This is because that in zynqmp_dp_probe it tries to access some DP
registers while the DP controller is still in the reset state. When
running "rmmod zynqmp_dpsub", zynqmp_dp_reset(dp, true) in
zynqmp_dp_phy_exit is called to force the DP controller into the reset
state. Then insmod will call zynqmp_dp_probe to program the DP registers,
but at this moment the DP controller hasn't been brought out of the reset
state yet since the function zynqmp_dp_reset(dp, false) is called later and
this will result the system hang.
Releasing the reset to DP controller before any read/write operation to it
will fix this issue. And for symmetry, move zynqmp_dp_reset() call from
zynqmp_dp_phy_exit() to zynqmp_dp_remove().
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
---
V2:
According to Laurent's comments:
- add zynqmp_dp_reset(dp, true) in error path in zynqmp_dp_probe
- move the zynqmp_dp_reset() call from zynqmp_dp_phy_exit() to zynqmp_dp_remove()
---
drivers/gpu/drm/xlnx/zynqmp_dp.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
index 99158ee67d02..337adf0769ad 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
@@ -402,10 +402,6 @@ static int zynqmp_dp_phy_init(struct zynqmp_dp *dp)
}
}
- ret = zynqmp_dp_reset(dp, false);
- if (ret < 0)
- return ret;
-
zynqmp_dp_clr(dp, ZYNQMP_DP_PHY_RESET, ZYNQMP_DP_PHY_RESET_ALL_RESET);
/*
@@ -441,8 +437,6 @@ static void zynqmp_dp_phy_exit(struct zynqmp_dp *dp)
ret);
}
- zynqmp_dp_reset(dp, true);
-
for (i = 0; i < dp->num_lanes; i++) {
ret = phy_exit(dp->phy[i]);
if (ret)
@@ -1682,9 +1676,13 @@ int zynqmp_dp_probe(struct zynqmp_dpsub *dpsub, struct drm_device *drm)
return PTR_ERR(dp->reset);
}
+ ret = zynqmp_dp_reset(dp, false);
+ if (ret < 0)
+ return ret;
+
ret = zynqmp_dp_phy_probe(dp);
if (ret)
- return ret;
+ goto err_reset;
/* Initialize the hardware. */
zynqmp_dp_write(dp, ZYNQMP_DP_TX_PHY_POWER_DOWN,
@@ -1696,7 +1694,7 @@ int zynqmp_dp_probe(struct zynqmp_dpsub *dpsub, struct drm_device *drm)
ret = zynqmp_dp_phy_init(dp);
if (ret)
- return ret;
+ goto err_reset;
zynqmp_dp_write(dp, ZYNQMP_DP_TRANSMITTER_ENABLE, 1);
@@ -1708,15 +1706,18 @@ int zynqmp_dp_probe(struct zynqmp_dpsub *dpsub, struct drm_device *drm)
zynqmp_dp_irq_handler, IRQF_ONESHOT,
dev_name(dp->dev), dp);
if (ret < 0)
- goto error;
+ goto err_phy_exit;
dev_dbg(dp->dev, "ZynqMP DisplayPort Tx probed with %u lanes\n",
dp->num_lanes);
return 0;
-error:
+err_phy_exit:
zynqmp_dp_phy_exit(dp);
+err_reset:
+ zynqmp_dp_reset(dp, true);
+
return ret;
}
@@ -1734,4 +1735,5 @@ void zynqmp_dp_remove(struct zynqmp_dpsub *dpsub)
zynqmp_dp_write(dp, ZYNQMP_DP_INT_DS, 0xffffffff);
zynqmp_dp_phy_exit(dp);
+ zynqmp_dp_reset(dp, true);
}
--
2.25.1
next reply other threads:[~2021-03-23 2:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-23 2:55 quanyang.wang [this message]
2021-03-24 3:13 ` [V2][PATCH] drm: xlnx: zynqmp: release reset to DP controller before accessing DP registers Laurent Pinchart
2021-08-06 10:37 ` Michal Simek
2021-08-06 10:43 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210323025501.1568039-1-quanyang.wang@windriver.com \
--to=quanyang.wang@windriver.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=hyun.kwon@xilinx.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).