From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <mturquette@baylibre.com>, <sboyd@kernel.org>,
<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<ludovic.desroches@microchip.com>
Cc: <linux-clk@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [RESEND PATCH 0/5] clk: at91: updates for power management and dvfs
Date: Wed, 24 Mar 2021 11:43:48 +0200 [thread overview]
Message-ID: <20210324094353.1710114-1-claudiu.beznea@microchip.com> (raw)
Hi,
This series addresses the power management for SAMA7G5 and also updates
the master clock prescaller and master clock divider drivers to accommodate
the requests at [1].
The power management part is implemented by adding
save_context()/restore_context() on each clock driver (patch 1/5). Since
the PM part is necessary only for backup mode (supported on SAMA5D2 and
SAMA7G5) the pmc.c has been adapted to call the
save_context()/restore_context() only on switches to/from backup mode
(patch 2/5).
Patch 3/5 adds the securam clock on SAMA7G5. This is necessary for
backup mode of SAMA7G5.
Patch 4/5 adds registers definitions for the new master clocks (MCK1..4) of
SAMA7G5 and adapt the clk-master.c. The defines exported in
include/linux/clk/at91_pmc.h will be also used by platform specific PM
code.
Patch 5/5 adpat the master clock divider and master clock prescaller
to address the requests at [1].
Thank you,
Claudiu Beznea
[1] https://lore.kernel.org/lkml/20210105104426.4tmgc2l3vyicwedd@vireshk-i7/
Claudiu Beznea (5):
clk: at91: re-factor clocks suspend/resume
clk: at91: pmc: execute suspend/resume only for backup mode
clk: at91: sama7g5: add securam's peripheral clock
clk: at91: clk-master: add register definition for sama7g5's master
clock
clk: at91: clk-master: update for dvfs
drivers/clk/at91/at91rm9200.c | 2 +-
drivers/clk/at91/at91sam9260.c | 2 +-
drivers/clk/at91/at91sam9g45.c | 2 +-
drivers/clk/at91/at91sam9n12.c | 2 +-
drivers/clk/at91/at91sam9rl.c | 2 +-
drivers/clk/at91/at91sam9x5.c | 2 +-
drivers/clk/at91/clk-generated.c | 45 +++-
drivers/clk/at91/clk-main.c | 66 +++++
drivers/clk/at91/clk-master.c | 395 +++++++++++++++++++++-------
drivers/clk/at91/clk-peripheral.c | 38 ++-
drivers/clk/at91/clk-pll.c | 37 +++
drivers/clk/at91/clk-programmable.c | 29 +-
drivers/clk/at91/clk-sam9x60-pll.c | 68 ++++-
drivers/clk/at91/clk-system.c | 20 ++
drivers/clk/at91/clk-usb.c | 27 ++
drivers/clk/at91/clk-utmi.c | 47 +++-
drivers/clk/at91/dt-compat.c | 2 +-
drivers/clk/at91/pmc.c | 175 +++---------
drivers/clk/at91/pmc.h | 27 +-
drivers/clk/at91/sam9x60.c | 2 +-
drivers/clk/at91/sama5d2.c | 2 +-
drivers/clk/at91/sama5d3.c | 2 +-
drivers/clk/at91/sama5d4.c | 2 +-
drivers/clk/at91/sama7g5.c | 3 +-
include/linux/clk/at91_pmc.h | 26 ++
25 files changed, 750 insertions(+), 275 deletions(-)
--
2.25.1
next reply other threads:[~2021-03-24 9:44 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-24 9:43 Claudiu Beznea [this message]
2021-03-24 9:43 ` [RESEND PATCH 1/5] clk: at91: re-factor clocks suspend/resume Claudiu Beznea
2021-03-30 17:14 ` Nicolas Ferre
2021-03-31 8:47 ` Claudiu.Beznea
2021-03-31 11:37 ` Nicolas Ferre
2021-03-24 9:43 ` [RESEND PATCH 2/5] clk: at91: pmc: execute suspend/resume only for backup mode Claudiu Beznea
2021-03-24 9:43 ` [RESEND PATCH 3/5] clk: at91: sama7g5: add securam's peripheral clock Claudiu Beznea
2021-03-30 17:27 ` Nicolas Ferre
2021-03-24 9:43 ` [RESEND PATCH 4/5] clk: at91: clk-master: add register definition for sama7g5's master clock Claudiu Beznea
2021-03-30 17:23 ` Nicolas Ferre
2021-03-24 9:43 ` [RESEND PATCH 5/5] clk: at91: clk-master: update for dvfs Claudiu Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210324094353.1710114-1-claudiu.beznea@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).