From: Alain Volmat <avolmat@me.com>
To: Patrice Chotard <patrice.chotard@foss.st.com>,
Rob Herring <robh+dt@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, avolmat@me.com
Subject: [PATCH v3 03/13] ARM: dts: sti: update flexgen compatible within stih410-clock
Date: Wed, 31 Mar 2021 22:42:18 +0200 [thread overview]
Message-ID: <20210331204228.26107-4-avolmat@me.com> (raw)
In-Reply-To: <20210331204228.26107-1-avolmat@me.com>
With the introduction of new flexgen compatible within the clk-flexgen
driver, remove the clock-output-names entry from the flexgen nodes
and set the new proper compatible corresponding.
Signed-off-by: Alain Volmat <avolmat@me.com>
---
arch/arm/boot/dts/stih410-clock.dtsi | 95 ++--------------------------
1 file changed, 6 insertions(+), 89 deletions(-)
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 81a8c25d7ba5..04b0d7080353 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -83,16 +83,12 @@
};
clk_s_a0_flexgen: clk-s-a0-flexgen {
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih410-a0";
#clock-cells = <1>;
clocks = <&clk_s_a0_pll 0>,
<&clk_sysin>;
-
- clock-output-names = "clk-ic-lmi0",
- "clk-ic-lmi1";
- clock-critical = <CLK_IC_LMI0>;
};
};
@@ -135,7 +131,7 @@
clk_s_c0_flexgen: clk-s-c0-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih410-c0";
clocks = <&clk_s_c0_pll0 0>,
<&clk_s_c0_pll1 0>,
@@ -145,52 +141,6 @@
<&clk_s_c0_quadfs 3>,
<&clk_sysin>;
- clock-output-names = "clk-icn-gpu",
- "clk-fdma",
- "clk-nand",
- "clk-hva",
- "clk-proc-stfe",
- "clk-proc-tp",
- "clk-rx-icn-dmu",
- "clk-rx-icn-hva",
- "clk-icn-cpu",
- "clk-tx-icn-dmu",
- "clk-mmc-0",
- "clk-mmc-1",
- "clk-jpegdec",
- "clk-ext2fa9",
- "clk-ic-bdisp-0",
- "clk-ic-bdisp-1",
- "clk-pp-dmu",
- "clk-vid-dmu",
- "clk-dss-lpc",
- "clk-st231-aud-0",
- "clk-st231-gp-1",
- "clk-st231-dmu",
- "clk-icn-lmi",
- "clk-tx-icn-disp-1",
- "clk-icn-sbc",
- "clk-stfe-frc2",
- "clk-eth-phy",
- "clk-eth-ref-phyclk",
- "clk-flash-promip",
- "clk-main-disp",
- "clk-aux-disp",
- "clk-compo-dvp",
- "clk-tx-icn-hades",
- "clk-rx-icn-hades",
- "clk-icn-reg-16",
- "clk-pp-hades",
- "clk-clust-hades",
- "clk-hwpe-hades",
- "clk-fc-hades";
- clock-critical = <CLK_PROC_STFE>,
- <CLK_ICN_CPU>,
- <CLK_TX_ICN_DMU>,
- <CLK_EXT2F_A9>,
- <CLK_ICN_LMI>,
- <CLK_ICN_SBC>;
-
/*
* ARM Peripheral clock for timers
*/
@@ -227,20 +177,13 @@
clk_s_d0_flexgen: clk-s-d0-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen-audio", "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih410-d0";
clocks = <&clk_s_d0_quadfs 0>,
<&clk_s_d0_quadfs 1>,
<&clk_s_d0_quadfs 2>,
<&clk_s_d0_quadfs 3>,
<&clk_sysin>;
-
- clock-output-names = "clk-pcm-0",
- "clk-pcm-1",
- "clk-pcm-2",
- "clk-spdiff",
- "clk-pcmr10-master",
- "clk-usb2-phy";
};
};
@@ -263,7 +206,7 @@
clk_s_d2_flexgen: clk-s-d2-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen-video", "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih407-d2";
clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
@@ -272,24 +215,7 @@
<&clk_sysin>,
<&clk_sysin>,
<&clk_tmdsout_hdmi>;
-
- clock-output-names = "clk-pix-main-disp",
- "clk-pix-pip",
- "clk-pix-gdp1",
- "clk-pix-gdp2",
- "clk-pix-gdp3",
- "clk-pix-gdp4",
- "clk-pix-aux-disp",
- "clk-denc",
- "clk-pix-hddac",
- "clk-hddac",
- "clk-sddac",
- "clk-pix-dvo",
- "clk-dvo",
- "clk-pix-hdmi",
- "clk-tmds-hdmi",
- "clk-ref-hdmiphy";
- };
+ };
};
clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
@@ -311,22 +237,13 @@
clk_s_d3_flexgen: clk-s-d3-flexgen {
#clock-cells = <1>;
- compatible = "st,flexgen";
+ compatible = "st,flexgen", "st,flexgen-stih407-d3";
clocks = <&clk_s_d3_quadfs 0>,
<&clk_s_d3_quadfs 1>,
<&clk_s_d3_quadfs 2>,
<&clk_s_d3_quadfs 3>,
<&clk_sysin>;
-
- clock-output-names = "clk-stfe-frc1",
- "clk-tsout-0",
- "clk-tsout-1",
- "clk-mchi",
- "clk-vsens-compo",
- "clk-frc1-remote",
- "clk-lpc-0",
- "clk-lpc-1";
};
};
};
--
2.17.1
next prev parent reply other threads:[~2021-03-31 20:44 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-31 20:42 [PATCH v3 00/13] Introduction of STiH418 based 4KOpen board Alain Volmat
2021-03-31 20:42 ` [PATCH v3 01/13] ARM: dts: sti: update flexgen compatible within stih418-clock Alain Volmat
2021-08-03 12:03 ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 02/13] ARM: dts: sti: update flexgen compatible within stih407-clock Alain Volmat
2021-08-03 12:03 ` Patrice CHOTARD
2021-03-31 20:42 ` Alain Volmat [this message]
2021-08-03 12:04 ` [PATCH v3 03/13] ARM: dts: sti: update flexgen compatible within stih410-clock Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 04/13] ARM: dts: sti: update clkgen-pll entries in stih407-clock Alain Volmat
2021-08-03 12:04 ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 05/13] ARM: dts: sti: update clkgen-pll entries in stih410-clock Alain Volmat
2021-08-03 12:05 ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 06/13] ARM: dts: sti: update clkgen-pll entries in stih418-clock Alain Volmat
2021-08-03 12:05 ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 07/13] ARM: dts: sti: update clkgen-fsyn entries in stih407-clock Alain Volmat
2021-08-03 12:06 ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 08/13] ARM: dts: sti: update clkgen-fsyn entries in stih410-clock Alain Volmat
2021-08-03 12:07 ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 09/13] ARM: dts: sti: update clkgen-fsyn entries in stih418-clock Alain Volmat
2021-08-03 12:07 ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 10/13] ARM: dts: sti: add the spinor controller node within stih407-family Alain Volmat
2021-08-03 12:08 ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 11/13] ARM: dts: sti: disable rng11 on the stih418 platform Alain Volmat
2021-08-03 12:08 ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 12/13] ARM: dts: sti: add the thermal sensor node within stih418 Alain Volmat
2021-08-03 12:08 ` Patrice CHOTARD
2021-03-31 20:42 ` [PATCH v3 13/13] ARM: dts: sti: Introduce 4KOpen (stih418-b2264) board Alain Volmat
2021-08-03 12:09 ` Patrice CHOTARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210331204228.26107-4-avolmat@me.com \
--to=avolmat@me.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patrice.chotard@foss.st.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).