On 14.04.2021 19:35:19, Aswath Govindraju wrote: > The driver adds support for generic CAN transceivers. Currently > the modes supported by this driver are standby and normal modes for TI > TCAN1042 and TCAN1043 CAN transceivers. > > The transceiver is modelled as a phy with pins controlled by gpios, to put > the transceiver in various device functional modes. It also gets the phy > attribute max_link_rate for the usage of CAN drivers. > > Signed-off-by: Aswath Govindraju > --- > MAINTAINERS | 1 + > drivers/phy/Kconfig | 9 ++ > drivers/phy/Makefile | 1 + > drivers/phy/phy-can-transceiver.c | 146 ++++++++++++++++++++++++++++++ > 4 files changed, 157 insertions(+) > create mode 100644 drivers/phy/phy-can-transceiver.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index e666d33af10d..70e1438c372d 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -4047,6 +4047,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git > T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git > F: Documentation/devicetree/bindings/net/can/ > F: Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml > +F: drivers/phy/phy-can-transceiver.c > F: drivers/net/can/ please keep this alphabetically sorted Marc -- Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung West/Dortmund | Phone: +49-231-2826-924 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |