From: Sean Christopherson <seanjc@google.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 23/43] KVM: VMX: Fold ept_update_paging_mode_cr0() back into vmx_set_cr0()
Date: Fri, 23 Apr 2021 17:46:25 -0700 [thread overview]
Message-ID: <20210424004645.3950558-24-seanjc@google.com> (raw)
In-Reply-To: <20210424004645.3950558-1-seanjc@google.com>
Move the CR0/CR3/CR4 shenanigans for EPT without unrestricted guest back
into vmx_set_cr0(). This will allow a future patch to eliminate the
rather gross stuffing of vcpu->arch.cr0 in the paging transition cases
by snapshotting the old CR0.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/vmx/vmx.c | 40 +++++++++++++++++-----------------------
1 file changed, 17 insertions(+), 23 deletions(-)
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 5795de909609..c9322cd55390 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -3102,27 +3102,6 @@ void ept_save_pdptrs(struct kvm_vcpu *vcpu)
kvm_register_mark_dirty(vcpu, VCPU_EXREG_PDPTR);
}
-static void ept_update_paging_mode_cr0(unsigned long cr0, struct kvm_vcpu *vcpu)
-{
- struct vcpu_vmx *vmx = to_vmx(vcpu);
-
- if (!kvm_register_is_available(vcpu, VCPU_EXREG_CR3))
- vmx_cache_reg(vcpu, VCPU_EXREG_CR3);
- if (!(cr0 & X86_CR0_PG)) {
- /* From paging/starting to nonpaging */
- exec_controls_setbit(vmx, CPU_BASED_CR3_LOAD_EXITING |
- CPU_BASED_CR3_STORE_EXITING);
- vcpu->arch.cr0 = cr0;
- vmx_set_cr4(vcpu, kvm_read_cr4(vcpu));
- } else if (!is_paging(vcpu)) {
- /* From nonpaging to paging */
- exec_controls_clearbit(vmx, CPU_BASED_CR3_LOAD_EXITING |
- CPU_BASED_CR3_STORE_EXITING);
- vcpu->arch.cr0 = cr0;
- vmx_set_cr4(vcpu, kvm_read_cr4(vcpu));
- }
-}
-
void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -3152,8 +3131,23 @@ void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
}
#endif
- if (enable_ept && !is_unrestricted_guest(vcpu))
- ept_update_paging_mode_cr0(cr0, vcpu);
+ if (enable_ept && !is_unrestricted_guest(vcpu)) {
+ if (!kvm_register_is_available(vcpu, VCPU_EXREG_CR3))
+ vmx_cache_reg(vcpu, VCPU_EXREG_CR3);
+ if (!(cr0 & X86_CR0_PG)) {
+ /* From paging/starting to nonpaging */
+ exec_controls_setbit(vmx, CPU_BASED_CR3_LOAD_EXITING |
+ CPU_BASED_CR3_STORE_EXITING);
+ vcpu->arch.cr0 = cr0;
+ vmx_set_cr4(vcpu, kvm_read_cr4(vcpu));
+ } else if (!is_paging(vcpu)) {
+ /* From nonpaging to paging */
+ exec_controls_clearbit(vmx, CPU_BASED_CR3_LOAD_EXITING |
+ CPU_BASED_CR3_STORE_EXITING);
+ vcpu->arch.cr0 = cr0;
+ vmx_set_cr4(vcpu, kvm_read_cr4(vcpu));
+ }
+ }
vmcs_writel(CR0_READ_SHADOW, cr0);
vmcs_writel(GUEST_CR0, hw_cr0);
--
2.31.1.498.g6c1eba8ee3d-goog
next prev parent reply other threads:[~2021-04-24 0:52 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-24 0:46 [PATCH 00/43] KVM: x86: vCPU RESET/INIT fixes and consolidation Sean Christopherson
2021-04-24 0:46 ` [PATCH 01/43] KVM: nVMX: Set LDTR to its architecturally defined value on nested VM-Exit Sean Christopherson
2021-05-19 5:30 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 02/43] KVM: VMX: Set EDX at INIT with CPUID.0x1, Family-Model-Stepping Sean Christopherson
2021-05-19 5:59 ` Reiji Watanabe
2021-05-19 18:47 ` Sean Christopherson
2021-05-21 7:07 ` Reiji Watanabe
2021-05-21 15:28 ` Sean Christopherson
2021-05-24 4:29 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 03/43] KVM: SVM: Require exact CPUID.0x1 match when stuffing EDX at INIT Sean Christopherson
2021-05-19 5:30 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 04/43] KVM: SVM: Fall back to KVM's hardcoded value for EDX at RESET/INIT Sean Christopherson
2021-05-19 5:41 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 05/43] KVM: x86: Split out CR0/CR4 MMU role change detectors to separate helpers Sean Christopherson
2021-05-19 5:31 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 06/43] KVM: x86: Properly reset MMU context at vCPU RESET/INIT Sean Christopherson
2021-05-17 16:57 ` Reiji Watanabe
2021-05-18 20:23 ` Sean Christopherson
2021-05-18 22:42 ` Reiji Watanabe
2021-05-19 17:16 ` Sean Christopherson
2021-05-24 4:57 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 07/43] KVM: VMX: Remove explicit MMU reset in enter_rmode() Sean Christopherson
2021-04-24 0:46 ` [PATCH 08/43] KVM: SVM: Drop explicit MMU reset at RESET/INIT Sean Christopherson
2021-05-19 5:32 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 09/43] KVM: SVM: Drop a redundant init_vmcb() from svm_create_vcpu() Sean Christopherson
2021-05-19 5:32 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 10/43] KVM: VMX: Move init_vmcs() invocation to vmx_vcpu_reset() Sean Christopherson
2021-05-19 5:33 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 11/43] KVM: x86: WARN if the APIC map is dirty without an in-kernel local APIC Sean Christopherson
2021-04-24 0:46 ` [PATCH 12/43] KVM: x86: Remove defunct BSP "update" in local APIC reset Sean Christopherson
2021-05-26 6:54 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 13/43] KVM: x86: Migrate the PIT only if vcpu0 is migrated, not any BSP Sean Christopherson
2021-04-24 0:46 ` [PATCH 14/43] KVM: x86: Don't force set BSP bit when local APIC is managed by userspace Sean Christopherson
2021-05-26 6:55 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 15/43] KVM: x86: Set BSP bit in reset BSP vCPU's APIC base by default Sean Christopherson
2021-05-26 6:55 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 16/43] KVM: VMX: Stuff vcpu->arch.apic_base directly at vCPU RESET Sean Christopherson
2021-05-26 6:55 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 17/43] KVM: x86: Open code necessary bits of kvm_lapic_set_base() " Sean Christopherson
2021-05-26 7:04 ` Reiji Watanabe
2021-05-26 15:15 ` Sean Christopherson
2021-04-24 0:46 ` [PATCH 18/43] KVM: x86: Consolidate APIC base RESET initialization code Sean Christopherson
2021-05-26 7:04 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 19/43] KVM: x86: Move EDX initialization at vCPU RESET to common code Sean Christopherson
2021-05-19 5:45 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 20/43] KVM: SVM: Don't bother writing vmcb->save.rip at vCPU RESET/INIT Sean Christopherson
2021-05-19 5:34 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 21/43] KVM: VMX: Invert handling of CR0.WP for EPT without unrestricted guest Sean Christopherson
2021-04-24 0:46 ` [PATCH 22/43] KVM: VMX: Remove direct write to vcpu->arch.cr0 during vCPU RESET/INIT Sean Christopherson
2021-05-19 5:34 ` Reiji Watanabe
2021-04-24 0:46 ` Sean Christopherson [this message]
2021-04-24 0:46 ` [PATCH 24/43] KVM: nVMX: Do not clear CR3 load/store exiting bits if L1 wants 'em Sean Christopherson
2021-04-24 0:46 ` [PATCH 25/43] KVM: VMX: Pull GUEST_CR3 from the VMCS iff CR3 load exiting is disabled Sean Christopherson
2021-04-24 0:46 ` [PATCH 26/43] KVM: VMX: Process CR0.PG side effects after setting CR0 assets Sean Christopherson
2021-04-24 0:46 ` [PATCH 27/43] KVM: VMX: Skip emulation required checks during pmode/rmode transitions Sean Christopherson
2021-04-24 0:46 ` [PATCH 28/43] KVM: nVMX: Don't evaluate "emulation required" on VM-Exit Sean Christopherson
2021-04-24 0:46 ` [PATCH 29/43] KVM: SVM: Tweak order of cr0/cr4/efer writes at RESET/INIT Sean Christopherson
2021-05-19 18:16 ` Reiji Watanabe
2021-05-19 19:58 ` Sean Christopherson
2021-05-23 23:04 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 30/43] KVM: SVM: Drop redundant writes to vmcb->save.cr4 " Sean Christopherson
2021-05-19 5:35 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 31/43] KVM: SVM: Stuff save->dr6 at during VMSA sync, not " Sean Christopherson
2021-04-24 0:46 ` [PATCH 32/43] KVM: VMX: Skip pointless MSR bitmap update when setting EFER Sean Christopherson
2021-04-24 0:46 ` [PATCH 33/43] KVM: VMX: Refresh list of user return MSRs after setting guest CPUID Sean Christopherson
2021-05-19 5:35 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 34/43] KVM: VMX: Don't _explicitly_ reconfigure user return MSRs on vCPU INIT Sean Christopherson
2021-04-24 0:46 ` [PATCH 35/43] KVM: x86: Move setting of sregs during vCPU RESET/INIT to common x86 Sean Christopherson
2021-05-17 23:50 ` Reiji Watanabe
2021-05-18 21:45 ` Sean Christopherson
2021-05-21 5:19 ` Reiji Watanabe
2021-04-24 0:46 ` [PATCH 36/43] KVM: VMX: Remove obsolete MSR bitmap refresh at vCPU RESET/INIT Sean Christopherson
2021-04-24 0:46 ` [PATCH 37/43] KVM: nVMX: Remove obsolete MSR bitmap refresh at nested transitions Sean Christopherson
2021-04-24 0:46 ` [PATCH 38/43] KVM: VMX: Don't redo x2APIC MSR bitmaps when userspace filter is changed Sean Christopherson
2021-04-24 0:46 ` [PATCH 39/43] KVM: VMX: Remove unnecessary initialization of msr_bitmap_mode Sean Christopherson
2021-04-24 0:46 ` [PATCH 40/43] KVM: VMX: Smush x2APIC MSR bitmap adjustments into single function Sean Christopherson
2021-04-24 0:46 ` [PATCH 41/43] KVM: VMX: Remove redundant write to set vCPU as active at RESET/INIT Sean Christopherson
2021-04-24 0:46 ` [PATCH 42/43] KVM: VMX: Drop VMWRITEs to zero fields at vCPU RESET Sean Christopherson
2021-05-24 21:15 ` Paolo Bonzini
2021-05-24 22:21 ` Jim Mattson
2021-05-24 22:28 ` Sean Christopherson
2021-05-24 22:48 ` Jim Mattson
2021-05-25 1:02 ` Sean Christopherson
2021-04-24 0:46 ` [PATCH 43/43] KVM: x86: Drop pointless @reset_roots from kvm_init_mmu() Sean Christopherson
2021-05-27 19:11 ` Sean Christopherson
2021-05-27 19:25 ` Sean Christopherson
2021-06-10 16:54 ` [PATCH 00/43] KVM: x86: vCPU RESET/INIT fixes and consolidation Paolo Bonzini
2021-06-10 19:22 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210424004645.3950558-24-seanjc@google.com \
--to=seanjc@google.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).