From: Sergey Senozhatsky <senozhatsky@chromium.org>
To: Tomasz Figa <tfiga@chromium.org>,
Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ricardo Ribalda <ribalda@chromium.org>,
Christoph Hellwig <hch@lst.de>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
Sergey Senozhatsky <senozhatsky@chromium.org>
Subject: [PATCHv2 2/8] videobuf2: inverse buffer cache_hints flags
Date: Tue, 27 Apr 2021 22:13:37 +0900 [thread overview]
Message-ID: <20210427131344.139443-3-senozhatsky@chromium.org> (raw)
In-Reply-To: <20210427131344.139443-1-senozhatsky@chromium.org>
It would be less error prone if the default cache hints value
(we kzalloc() structs, so it's zeroed out by default) would be
to "always sync/flush" caches. Inverse and rename cache hints
flags.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
---
.../media/common/videobuf2/videobuf2-core.c | 31 ++++++-------------
.../media/common/videobuf2/videobuf2-v4l2.c | 17 +++-------
include/media/videobuf2-core.h | 12 +++----
3 files changed, 21 insertions(+), 39 deletions(-)
diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c
index 9a5cc3e63439..23e41fec9880 100644
--- a/drivers/media/common/videobuf2/videobuf2-core.c
+++ b/drivers/media/common/videobuf2/videobuf2-core.c
@@ -327,12 +327,12 @@ static void __vb2_buf_mem_prepare(struct vb2_buffer *vb)
if (vb->synced)
return;
- if (vb->need_cache_sync_on_prepare) {
- for (plane = 0; plane < vb->num_planes; ++plane)
- call_void_memop(vb, prepare,
- vb->planes[plane].mem_priv);
- }
vb->synced = 1;
+ if (vb->skip_cache_sync_on_prepare)
+ return;
+
+ for (plane = 0; plane < vb->num_planes; ++plane)
+ call_void_memop(vb, prepare, vb->planes[plane].mem_priv);
}
/*
@@ -346,12 +346,12 @@ static void __vb2_buf_mem_finish(struct vb2_buffer *vb)
if (!vb->synced)
return;
- if (vb->need_cache_sync_on_finish) {
- for (plane = 0; plane < vb->num_planes; ++plane)
- call_void_memop(vb, finish,
- vb->planes[plane].mem_priv);
- }
vb->synced = 0;
+ if (vb->skip_cache_sync_on_finish)
+ return;
+
+ for (plane = 0; plane < vb->num_planes; ++plane)
+ call_void_memop(vb, finish, vb->planes[plane].mem_priv);
}
/*
@@ -415,17 +415,6 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory,
vb->index = q->num_buffers + buffer;
vb->type = q->type;
vb->memory = memory;
- /*
- * We need to set these flags here so that the videobuf2 core
- * will call ->prepare()/->finish() cache sync/flush on vb2
- * buffers when appropriate. However, we can avoid explicit
- * ->prepare() and ->finish() cache sync for DMABUF buffers,
- * because DMA exporter takes care of it.
- */
- if (q->memory != VB2_MEMORY_DMABUF) {
- vb->need_cache_sync_on_prepare = 1;
- vb->need_cache_sync_on_finish = 1;
- }
for (plane = 0; plane < num_planes; ++plane) {
vb->planes[plane].length = plane_sizes[plane];
vb->planes[plane].min_length = plane_sizes[plane];
diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c b/drivers/media/common/videobuf2/videobuf2-v4l2.c
index 7e96f67c60ba..db93678860bd 100644
--- a/drivers/media/common/videobuf2/videobuf2-v4l2.c
+++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c
@@ -351,18 +351,11 @@ static void set_buffer_cache_hints(struct vb2_queue *q,
* we always need ->prepare() or/and ->finish() cache sync.
*/
if (q->memory == VB2_MEMORY_DMABUF) {
- vb->need_cache_sync_on_finish = 0;
- vb->need_cache_sync_on_prepare = 0;
+ vb->skip_cache_sync_on_finish = 1;
+ vb->skip_cache_sync_on_prepare = 1;
return;
}
- /*
- * Cache sync/invalidation flags are set by default in order to
- * preserve existing behaviour for old apps/drivers.
- */
- vb->need_cache_sync_on_prepare = 1;
- vb->need_cache_sync_on_finish = 1;
-
if (!vb2_queue_allows_cache_hints(q)) {
/*
* Clear buffer cache flags if queue does not support user
@@ -379,13 +372,13 @@ static void set_buffer_cache_hints(struct vb2_queue *q,
* TO_DEVICE.
*/
if (q->dma_dir == DMA_TO_DEVICE)
- vb->need_cache_sync_on_finish = 0;
+ vb->skip_cache_sync_on_finish = 1;
if (b->flags & V4L2_BUF_FLAG_NO_CACHE_INVALIDATE)
- vb->need_cache_sync_on_finish = 0;
+ vb->skip_cache_sync_on_finish = 1;
if (b->flags & V4L2_BUF_FLAG_NO_CACHE_CLEAN)
- vb->need_cache_sync_on_prepare = 0;
+ vb->skip_cache_sync_on_prepare = 1;
}
static int vb2_queue_or_prepare_buf(struct vb2_queue *q, struct media_device *mdev,
diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
index 3b5986cee073..66e548268242 100644
--- a/include/media/videobuf2-core.h
+++ b/include/media/videobuf2-core.h
@@ -267,10 +267,10 @@ struct vb2_buffer {
* after the 'buf_finish' op is called.
* copied_timestamp: the timestamp of this capture buffer was copied
* from an output buffer.
- * need_cache_sync_on_prepare: when set buffer's ->prepare() function
- * performs cache sync/invalidation.
- * need_cache_sync_on_finish: when set buffer's ->finish() function
- * performs cache sync/invalidation.
+ * skip_cache_sync_on_prepare: when set buffer's ->prepare() function
+ * skips cache sync/invalidation.
+ * skip_cache_sync_on_finish: when set buffer's ->finish() function
+ * skips cache sync/invalidation.
* queued_entry: entry on the queued buffers list, which holds
* all buffers queued from userspace
* done_entry: entry on the list that stores all buffers ready
@@ -281,8 +281,8 @@ struct vb2_buffer {
unsigned int synced:1;
unsigned int prepared:1;
unsigned int copied_timestamp:1;
- unsigned int need_cache_sync_on_prepare:1;
- unsigned int need_cache_sync_on_finish:1;
+ unsigned int skip_cache_sync_on_prepare:1;
+ unsigned int skip_cache_sync_on_finish:1;
struct vb2_plane planes[VB2_MAX_PLANES];
struct list_head queued_entry;
--
2.31.1.498.g6c1eba8ee3d-goog
next prev parent reply other threads:[~2021-04-27 13:14 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-27 13:13 [PATCHv2 0/8] videobuf2: support new noncontiguous DMA API Sergey Senozhatsky
2021-04-27 13:13 ` [PATCHv2 1/8] videobuf2: rework vb2_mem_ops API Sergey Senozhatsky
2021-04-27 13:13 ` Sergey Senozhatsky [this message]
2021-04-27 13:13 ` [PATCHv2 3/8] videobuf2: split buffer cache_hints initialisation Sergey Senozhatsky
2021-04-27 13:13 ` [PATCHv2 4/8] videobuf2: move cache_hints handling to allocators Sergey Senozhatsky
2021-04-27 13:13 ` [PATCHv2 5/8] videobuf2: add V4L2_MEMORY_FLAG_NON_COHERENT flag Sergey Senozhatsky
2021-04-27 13:13 ` [PATCHv2 6/8] videobuf2: add queue memory coherency parameter Sergey Senozhatsky
2021-04-27 13:13 ` [PATCHv2 7/8] videobuf2: handle V4L2_MEMORY_FLAG_NON_COHERENT flag Sergey Senozhatsky
2021-05-01 3:48 ` Sergey Senozhatsky
2021-06-03 11:32 ` Hans Verkuil
2021-06-17 1:46 ` Sergey Senozhatsky
2021-04-27 13:13 ` [PATCHv2 8/8] videobuf2: handle non-contiguous DMA allocations Sergey Senozhatsky
2021-04-28 6:14 ` Christoph Hellwig
2021-06-03 11:59 ` Hans Verkuil
2021-06-17 7:56 ` Sergey Senozhatsky
2021-06-17 8:01 ` Christoph Hellwig
2021-06-17 8:30 ` Tomasz Figa
2021-06-17 8:52 ` Christoph Hellwig
2021-06-17 9:40 ` Tomasz Figa
2021-06-17 10:06 ` Christoph Hellwig
2021-06-18 3:21 ` Tomasz Figa
2021-06-18 4:25 ` Christoph Hellwig
2021-06-18 4:44 ` Tomasz Figa
2021-06-22 7:33 ` Christoph Hellwig
2021-07-07 12:42 ` Tomasz Figa
2021-06-25 3:10 ` Sergey Senozhatsky
2021-07-07 12:48 ` Tomasz Figa
2021-07-07 13:29 ` Sergey Senozhatsky
2021-07-07 14:10 ` Tomasz Figa
2021-07-09 7:20 ` Sergey Senozhatsky
2021-06-17 7:56 ` Sergey Senozhatsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210427131344.139443-3-senozhatsky@chromium.org \
--to=senozhatsky@chromium.org \
--cc=hch@lst.de \
--cc=hverkuil-cisco@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=ribalda@chromium.org \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).