From: Lino Sanfilippo <LinoSanfilippo@gmx.de>
To: peterhuewe@gmx.de, jarkko@kernel.org, jgg@ziepe.ca
Cc: stefanb@linux.vnet.ibm.com,
James.Bottomley@hansenpartnership.com, keescook@chromium.org,
jsnitsel@redhat.com, ml.linux@elloe.vision,
linux-integrity@vger.kernel.org, linux-kernel@vger.kernel.org,
LinoSanfilippo@gmx.de
Subject: [PATCH v3 4/4] tpm: Only enable supported irqs
Date: Sat, 1 May 2021 15:57:27 +0200 [thread overview]
Message-ID: <20210501135727.17747-5-LinoSanfilippo@gmx.de> (raw)
In-Reply-To: <20210501135727.17747-1-LinoSanfilippo@gmx.de>
Do not set interrupts which are not supported by the hardware. Instead use
the information from the capability query and activate only the reported
interrupts.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
---
drivers/char/tpm/tpm_tis_core.c | 68 ++++++++++++++++++---------------
drivers/char/tpm/tpm_tis_core.h | 1 +
2 files changed, 38 insertions(+), 31 deletions(-)
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 9615234054aa..757498a63f57 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -936,13 +936,47 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
if (rc)
goto out_err;
+ /* Figure out the capabilities */
+ rc = tpm_tis_read32(priv, TPM_INTF_CAPS(priv->locality), &intfcaps);
+ if (rc < 0)
+ goto out_err;
+
+ dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
+ intfcaps);
+ if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
+ dev_dbg(dev, "\tBurst Count Static\n");
+ if (intfcaps & TPM_INTF_CMD_READY_INT) {
+ priv->supported_irqs |= TPM_INTF_CMD_READY_INT;
+ dev_dbg(dev, "\tCommand Ready Int Support\n");
+ }
+ if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
+ dev_dbg(dev, "\tInterrupt Edge Falling\n");
+ if (intfcaps & TPM_INTF_INT_EDGE_RISING)
+ dev_dbg(dev, "\tInterrupt Edge Rising\n");
+ if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
+ dev_dbg(dev, "\tInterrupt Level Low\n");
+ if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
+ dev_dbg(dev, "\tInterrupt Level High\n");
+ if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT) {
+ priv->supported_irqs |= TPM_INTF_LOCALITY_CHANGE_INT;
+ dev_dbg(dev, "\tLocality Change Int Support\n");
+ }
+ if (intfcaps & TPM_INTF_STS_VALID_INT) {
+ priv->supported_irqs |= TPM_INTF_STS_VALID_INT;
+ dev_dbg(dev, "\tSts Valid Int Support\n");
+ }
+ if (intfcaps & TPM_INTF_DATA_AVAIL_INT) {
+ priv->supported_irqs |= TPM_INTF_DATA_AVAIL_INT;
+ dev_dbg(dev, "\tData Avail Int Support\n");
+ }
+
/* Take control of the TPM's interrupt hardware and shut it off */
rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
if (rc < 0)
goto out_err;
- intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
- TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
+ intmask |= priv->supported_irqs;
+
intmask &= ~TPM_GLOBAL_INT_ENABLE;
tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
@@ -971,32 +1005,6 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
goto out_err;
}
- /* Figure out the capabilities */
- rc = tpm_tis_read32(priv, TPM_INTF_CAPS(priv->locality), &intfcaps);
- if (rc < 0)
- goto out_err;
-
- dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
- intfcaps);
- if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
- dev_dbg(dev, "\tBurst Count Static\n");
- if (intfcaps & TPM_INTF_CMD_READY_INT)
- dev_dbg(dev, "\tCommand Ready Int Support\n");
- if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
- dev_dbg(dev, "\tInterrupt Edge Falling\n");
- if (intfcaps & TPM_INTF_INT_EDGE_RISING)
- dev_dbg(dev, "\tInterrupt Edge Rising\n");
- if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
- dev_dbg(dev, "\tInterrupt Level Low\n");
- if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
- dev_dbg(dev, "\tInterrupt Level High\n");
- if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
- dev_dbg(dev, "\tLocality Change Int Support\n");
- if (intfcaps & TPM_INTF_STS_VALID_INT)
- dev_dbg(dev, "\tSts Valid Int Support\n");
- if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
- dev_dbg(dev, "\tData Avail Int Support\n");
-
/* INTERRUPT Setup */
init_waitqueue_head(&priv->read_queue);
init_waitqueue_head(&priv->int_queue);
@@ -1066,9 +1074,7 @@ static void tpm_tis_reenable_interrupts(struct tpm_chip *chip)
if (rc < 0)
goto out;
- intmask |= TPM_INTF_CMD_READY_INT
- | TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT
- | TPM_INTF_STS_VALID_INT | TPM_GLOBAL_INT_ENABLE;
+ intmask |= priv->supported_irqs | TPM_GLOBAL_INT_ENABLE;
tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index dc5f92b18dca..8ff62213d8fc 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -89,6 +89,7 @@ struct tpm_tis_data {
u16 manufacturer_id;
int locality;
int irq;
+ unsigned int supported_irqs;
unsigned int flags;
void __iomem *ilb_base_addr;
u16 clkrun_enabled;
--
2.31.1
next prev parent reply other threads:[~2021-05-01 14:02 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-01 13:57 [PATCH v3 0/4] Fixes for TPM interrupt handling Lino Sanfilippo
2021-05-01 13:57 ` [PATCH v3 1/4] tpm: Use a threaded interrupt handler Lino Sanfilippo
2021-05-03 15:14 ` Jarkko Sakkinen
2021-05-04 22:54 ` Lino Sanfilippo
2021-05-06 1:46 ` Jarkko Sakkinen
2021-05-01 13:57 ` [PATCH v3 2/4] tpm: Simplify locality handling Lino Sanfilippo
2021-05-03 15:50 ` Jarkko Sakkinen
2021-05-04 23:15 ` Lino Sanfilippo
2021-05-06 1:47 ` Jarkko Sakkinen
2022-03-24 17:04 ` [PATCH v3 0/4] Fixes for TPM interrupt handling Michael Niewöhner
2022-03-25 2:14 ` Jarkko Sakkinen
2022-03-25 12:32 ` Michael Niewöhner
2022-03-26 3:24 ` Lino Sanfilippo
2022-03-26 8:59 ` Michael Niewöhner
2022-03-30 15:19 ` Jarkko Sakkinen
2022-04-20 5:30 ` Jarkko Sakkinen
2022-04-20 5:32 ` Jarkko Sakkinen
2022-04-24 2:22 ` Lino Sanfilippo
2022-04-25 13:57 ` Jarkko Sakkinen
2022-03-30 15:18 ` Jarkko Sakkinen
2021-05-01 13:57 ` [PATCH v3 3/4] tpm: Fix test for interrupts Lino Sanfilippo
2021-05-03 15:52 ` Jarkko Sakkinen
2021-05-04 23:18 ` Lino Sanfilippo
2021-05-01 13:57 ` Lino Sanfilippo [this message]
2021-05-01 19:09 ` [PATCH v3 4/4] tpm: Only enable supported irqs Stefan Berger
2021-05-02 3:15 ` Lino Sanfilippo
2021-05-03 15:52 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210501135727.17747-5-LinoSanfilippo@gmx.de \
--to=linosanfilippo@gmx.de \
--cc=James.Bottomley@hansenpartnership.com \
--cc=jarkko@kernel.org \
--cc=jgg@ziepe.ca \
--cc=jsnitsel@redhat.com \
--cc=keescook@chromium.org \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ml.linux@elloe.vision \
--cc=peterhuewe@gmx.de \
--cc=stefanb@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).