From: Ansuel Smith <ansuelsmth@gmail.com>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ansuel Smith <ansuelsmth@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Russell King <linux@armlinux.org.uk>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [RFC PATCH net-next v3 06/20] net: dsa: qca8k: handle error with qca8k_write operation
Date: Wed, 5 May 2021 00:29:00 +0200 [thread overview]
Message-ID: <20210504222915.17206-6-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20210504222915.17206-1-ansuelsmth@gmail.com>
qca8k_write can fail. Rework any user to handle error values and
correctly return.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
drivers/net/dsa/qca8k.c | 112 +++++++++++++++++++++++++++-------------
1 file changed, 75 insertions(+), 37 deletions(-)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index cde68ed6856b..899bf93118eb 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -165,15 +165,16 @@ qca8k_read(struct qca8k_priv *priv, u32 reg)
return val;
}
-static void
+static int
qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
{
+ struct mii_bus *bus = priv->bus;
u16 r1, r2, page;
int ret;
qca8k_split_addr(reg, &r1, &r2, &page);
- mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
ret = qca8k_set_page(priv->bus, page);
if (ret < 0)
@@ -183,6 +184,7 @@ qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
exit:
mutex_unlock(&priv->bus->mdio_lock);
+ return ret;
}
static u32
@@ -242,9 +244,7 @@ qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
- qca8k_write(priv, reg, val);
-
- return 0;
+ return qca8k_write(priv, reg, val);
}
static const struct regmap_range qca8k_readable_ranges[] = {
@@ -365,6 +365,7 @@ static int
qca8k_fdb_access(struct qca8k_priv *priv, enum qca8k_fdb_cmd cmd, int port)
{
u32 reg;
+ int ret;
/* Set the command and FDB index */
reg = QCA8K_ATU_FUNC_BUSY;
@@ -375,7 +376,9 @@ qca8k_fdb_access(struct qca8k_priv *priv, enum qca8k_fdb_cmd cmd, int port)
}
/* Write the function register triggering the table access */
- qca8k_write(priv, QCA8K_REG_ATU_FUNC, reg);
+ ret = qca8k_write(priv, QCA8K_REG_ATU_FUNC, reg);
+ if (ret)
+ return ret;
/* wait for completion */
if (qca8k_busy_wait(priv, QCA8K_REG_ATU_FUNC, QCA8K_ATU_FUNC_BUSY))
@@ -448,6 +451,7 @@ static int
qca8k_vlan_access(struct qca8k_priv *priv, enum qca8k_vlan_cmd cmd, u16 vid)
{
u32 reg;
+ int ret;
/* Set the command and VLAN index */
reg = QCA8K_VTU_FUNC1_BUSY;
@@ -455,7 +459,9 @@ qca8k_vlan_access(struct qca8k_priv *priv, enum qca8k_vlan_cmd cmd, u16 vid)
reg |= vid << QCA8K_VTU_FUNC1_VID_S;
/* Write the function register triggering the table access */
- qca8k_write(priv, QCA8K_REG_VTU_FUNC1, reg);
+ ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC1, reg);
+ if (ret)
+ return ret;
/* wait for completion */
if (qca8k_busy_wait(priv, QCA8K_REG_VTU_FUNC1, QCA8K_VTU_FUNC1_BUSY))
@@ -503,7 +509,9 @@ qca8k_vlan_add(struct qca8k_priv *priv, u8 port, u16 vid, bool untagged)
reg |= QCA8K_VTU_FUNC0_EG_MODE_TAG <<
QCA8K_VTU_FUNC0_EG_MODE_S(port);
- qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
+ ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
+ if (ret)
+ return ret;
ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid);
out:
@@ -546,7 +554,9 @@ qca8k_vlan_del(struct qca8k_priv *priv, u8 port, u16 vid)
if (del) {
ret = qca8k_vlan_access(priv, QCA8K_VLAN_PURGE, vid);
} else {
- qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
+ ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
+ if (ret)
+ return ret;
ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid);
}
@@ -556,15 +566,25 @@ qca8k_vlan_del(struct qca8k_priv *priv, u8 port, u16 vid)
return ret;
}
-static void
+static int
qca8k_mib_init(struct qca8k_priv *priv)
{
+ int ret;
+
mutex_lock(&priv->reg_mutex);
qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY);
- qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY);
+
+ ret = qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY);
+ if (ret)
+ goto exit;
+
qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP);
- qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
+
+ ret = qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
+
+exit:
mutex_unlock(&priv->reg_mutex);
+ return ret;
}
static void
@@ -601,6 +621,7 @@ static int
qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
{
u32 phy, val;
+ int ret;
if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
return -EINVAL;
@@ -614,7 +635,9 @@ qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
QCA8K_MDIO_MASTER_DATA(data);
- qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
+ ret = qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
+ if (ret)
+ return ret;
return qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
QCA8K_MDIO_MASTER_BUSY);
@@ -624,6 +647,7 @@ static int
qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum)
{
u32 phy, val;
+ int ret;
if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
return -EINVAL;
@@ -636,7 +660,9 @@ qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum)
QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
QCA8K_MDIO_MASTER_REG_ADDR(regnum);
- qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
+ ret = qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
+ if (ret)
+ return ret;
if (qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
QCA8K_MDIO_MASTER_BUSY))
@@ -767,12 +793,18 @@ qca8k_setup(struct dsa_switch *ds)
QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
/* Enable MIB counters */
- qca8k_mib_init(priv);
+ ret = qca8k_mib_init(priv);
+ if (ret)
+ pr_warn("mib init failed");
/* Enable QCA header mode on the cpu port */
- qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_CPU_PORT),
- QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
- QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
+ ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_CPU_PORT),
+ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
+ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
+ if (ret) {
+ pr_err("failed enabling QCA header mode");
+ return ret;
+ }
/* Disable forwarding by default on all ports */
for (i = 0; i < QCA8K_NUM_PORTS; i++)
@@ -784,11 +816,13 @@ qca8k_setup(struct dsa_switch *ds)
qca8k_port_set_status(priv, i, 0);
/* Forward all unknown frames to CPU port for Linux processing */
- qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
+ ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
+ BIT(0) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
+ BIT(0) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
+ BIT(0) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
+ BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
+ if (ret)
+ return ret;
/* Setup connection between CPU port & user ports */
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
@@ -816,16 +850,20 @@ qca8k_setup(struct dsa_switch *ds)
qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
0xfff << shift,
QCA8K_PORT_VID_DEF << shift);
- qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
- QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
- QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
+ ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
+ QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
+ QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
+ if (ret)
+ return ret;
}
}
/* Setup our port MTUs to match power on defaults */
for (i = 0; i < QCA8K_NUM_PORTS; i++)
priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
- qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN);
+ ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN);
+ if (ret)
+ pr_warn("failed setting MTU settings");
/* Flush the FDB table */
qca8k_fdb_flush(priv);
@@ -1141,8 +1179,8 @@ qca8k_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *eee)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port);
- int ret = 0;
u32 reg;
+ int ret;
mutex_lock(&priv->reg_mutex);
reg = qca8k_read(priv, QCA8K_REG_EEE_CTRL);
@@ -1155,7 +1193,7 @@ qca8k_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *eee)
reg |= lpi_en;
else
reg &= ~lpi_en;
- qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg);
+ ret = qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg);
exit:
mutex_unlock(&priv->reg_mutex);
@@ -1285,9 +1323,7 @@ qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
mtu = priv->port_mtu[i];
/* Include L2 header / FCS length */
- qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, mtu + ETH_HLEN + ETH_FCS_LEN);
-
- return 0;
+ return qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, mtu + ETH_HLEN + ETH_FCS_LEN);
}
static int
@@ -1382,7 +1418,7 @@ qca8k_port_vlan_add(struct dsa_switch *ds, int port,
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
struct qca8k_priv *priv = ds->priv;
- int ret = 0;
+ int ret;
ret = qca8k_vlan_add(priv, port, vlan->vid, untagged);
if (ret) {
@@ -1395,9 +1431,11 @@ qca8k_port_vlan_add(struct dsa_switch *ds, int port,
qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port),
0xfff << shift, vlan->vid << shift);
- qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port),
- QCA8K_PORT_VLAN_CVID(vlan->vid) |
- QCA8K_PORT_VLAN_SVID(vlan->vid));
+ ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port),
+ QCA8K_PORT_VLAN_CVID(vlan->vid) |
+ QCA8K_PORT_VLAN_SVID(vlan->vid));
+ if (ret)
+ return ret;
}
return 0;
@@ -1408,7 +1446,7 @@ qca8k_port_vlan_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan)
{
struct qca8k_priv *priv = ds->priv;
- int ret = 0;
+ int ret;
ret = qca8k_vlan_del(priv, port, vlan->vid);
if (ret)
--
2.30.2
next prev parent reply other threads:[~2021-05-04 22:29 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-04 22:28 [RFC PATCH net-next v3 01/20] net: mdio: ipq8064: clean whitespaces in define Ansuel Smith
2021-05-04 22:28 ` [RFC PATCH net-next v3 02/20] net: mdio: ipq8064: add regmap config to disable REGCACHE Ansuel Smith
2021-05-04 22:28 ` [RFC PATCH net-next v3 03/20] net: mdio: ipq8064: enlarge sleep after read/write operation Ansuel Smith
2021-05-04 22:28 ` [RFC PATCH net-next v3 04/20] net: dsa: qca8k: handle qca8k_set_page errors Ansuel Smith
2021-05-05 0:25 ` Andrew Lunn
2021-05-05 0:26 ` Andrew Lunn
2021-05-04 22:28 ` [RFC PATCH net-next v3 05/20] net: dsa: qca8k: handle error with qca8k_read operation Ansuel Smith
2021-05-05 0:36 ` Andrew Lunn
2021-05-05 0:44 ` Ansuel Smith
2021-05-04 22:29 ` Ansuel Smith [this message]
2021-05-05 0:41 ` [RFC PATCH net-next v3 06/20] net: dsa: qca8k: handle error with qca8k_write operation Andrew Lunn
2021-05-05 0:47 ` Ansuel Smith
2021-05-06 11:19 ` Vladimir Oltean
2021-05-04 22:29 ` [RFC PATCH net-next v3 07/20] net: dsa: qca8k: handle error with qca8k_rmw operation Ansuel Smith
2021-05-05 0:46 ` Andrew Lunn
2021-05-05 0:51 ` Ansuel Smith
2021-05-04 22:29 ` [RFC PATCH net-next v3 08/20] net: dsa: qca8k: add support for qca8327 switch Ansuel Smith
2021-05-05 0:48 ` Andrew Lunn
2021-05-06 11:20 ` Vladimir Oltean
2021-05-04 22:29 ` [RFC PATCH net-next v3 09/20] devicetree: net: dsa: qca8k: Document new compatible qca8327 Ansuel Smith
2021-05-05 0:48 ` Andrew Lunn
2021-05-06 21:07 ` Rob Herring
2021-05-04 22:29 ` [RFC PATCH net-next v3 10/20] net: dsa: qca8k: add priority tweak to qca8337 switch Ansuel Smith
2021-05-05 0:53 ` Andrew Lunn
2021-05-06 11:16 ` Vladimir Oltean
2021-05-04 22:29 ` [RFC PATCH net-next v3 11/20] net: dsa: qca8k: add GLOBAL_FC settings needed for qca8327 Ansuel Smith
2021-05-05 0:54 ` Andrew Lunn
2021-05-04 22:29 ` [RFC PATCH net-next v3 12/20] net: dsa: qca8k: add support for switch rev Ansuel Smith
2021-05-04 22:29 ` [RFC PATCH net-next v3 13/20] net: dsa: qca8k: make rgmii delay configurable Ansuel Smith
2021-05-05 1:00 ` Andrew Lunn
2021-05-05 1:07 ` Ansuel Smith
2021-05-06 11:10 ` Vladimir Oltean
2021-05-06 21:53 ` Ansuel Smith
2021-05-07 8:51 ` Vladimir Oltean
2021-05-04 22:29 ` [RFC PATCH net-next v3 14/20] net: dsa: qca8k: clear MASTER_EN after phy read/write Ansuel Smith
2021-05-04 22:29 ` [RFC PATCH net-next v3 15/20] net: dsa: qca8k: dsa: qca8k: protect MASTER busy_wait with mdio mutex Ansuel Smith
2021-05-05 1:04 ` Andrew Lunn
2021-05-04 22:29 ` [RFC PATCH net-next v3 16/20] net: dsa: qca8k: enlarge mdio delay and timeout Ansuel Smith
2021-05-06 11:27 ` Vladimir Oltean
2021-05-04 22:29 ` [RFC PATCH net-next v3 17/20] net: phy: phylink: permit to pass dev_flags to phylink_connect_phy Ansuel Smith
2021-05-04 22:33 ` Florian Fainelli
2021-05-05 0:35 ` Ansuel Smith
2021-05-04 22:29 ` [RFC PATCH net-next v3 18/20] net: dsa: slave: pass dev_flags also to internal PHY Ansuel Smith
2021-05-04 22:29 ` [RFC PATCH net-next v3 19/20] net: dsa: qca8k: pass switch_revision info to phy dev_flags Ansuel Smith
2021-05-06 11:24 ` Vladimir Oltean
2021-05-07 23:26 ` Ansuel Smith
2021-05-07 23:33 ` Russell King - ARM Linux admin
2021-05-07 23:51 ` Ansuel Smith
2021-05-08 17:31 ` Andrew Lunn
2021-05-08 18:26 ` Vladimir Oltean
2021-05-08 19:39 ` Russell King - ARM Linux admin
2021-05-08 20:55 ` Andrew Lunn
2021-05-07 9:44 ` Russell King - ARM Linux admin
2021-05-04 22:29 ` [RFC PATCH net-next v3 20/20] net: phy: add qca8k driver for qca8k switch internal PHY Ansuel Smith
2021-05-05 1:11 ` Andrew Lunn
2021-05-05 1:17 ` Ansuel Smith
2021-05-05 12:06 ` Andrew Lunn
2021-05-05 0:17 ` [RFC PATCH net-next v3 01/20] net: mdio: ipq8064: clean whitespaces in define Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210504222915.17206-6-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).