[PATCH v3 0/7] Add driver for NVIDIA Tegra30 SoC Thermal sensor

From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Zhang Rui <rui.zhang@intel.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Amit Kucheria <amitk@kernel.org>,
	Andreas Westman Dorcsak <hedmoo@yahoo.com>,
	Maxim Schwalm <maxim.schwalm@gmail.com>,
	Svyatoslav Ryhel <clamor95@gmail.com>,
	Ihor Didenko <tailormoon@rambler.ru>,
	Ion Agorria <ion@agorria.com>,
	Matt Merhar <mattmerhar@protonmail.com>,
	Peter Geis <pgwipeout@gmail.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-tegra@vger.kernel.org, linux-pm@vger.kernel.org
Subject: [PATCH v3 0/7] Add driver for NVIDIA Tegra30 SoC Thermal sensor
Date: Sat, 29 May 2021 20:09:48 +0300	[thread overview]
Message-ID: <20210529170955.32574-1-digetx@gmail.com> (raw)

Hi,

This series adds support for the thermal sensor that is found on NVIDIA
Tegra30 SoC. Sensor monitors temperature and voltage of the SoC, it also
emits signals to the power management and clock controllers that are
performing the emergency shut down and the CPU frequency throttling
when a pre-programmed temperature levels are reached.

Please note that this series is made on top of ACMTON patches! [1].
Otherwise tegra30.dtsi will fail to compile.

[1] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=243115

Changelog:

v3: - No code changes. CC'ed linux-pm, which was previously missed by accident.
      Not sure how much that is important for the thermal patches, but won't
      hurt to re-send since only DT binding was reviewed so far.

v2: - Made a very minor improvement to one error message, it now prints
      number of channel at which error occurred.

    - Added r-b from Rob Herring to the binding.

Dmitry Osipenko (7):
  dt-bindings: thermal: Add binding for Tegra30 thermal sensor
  thermal: thermal_of: Stop zone device before unregistering it
  thermal/core: Export thermal_cooling_device_stats_update()
  thermal/drivers/tegra: Add driver for Tegra30 thermal sensor
  ARM: tegra_defconfig: Enable CONFIG_TEGRA30_TSENSOR
  ARM: multi_v7_defconfig: Enable CONFIG_TEGRA30_TSENSOR
  ARM: tegra: Add SoC thermal sensor to Tegra30 device-trees

 .../thermal/nvidia,tegra30-tsensor.yaml       |  78 ++
 arch/arm/boot/dts/tegra30-ouya.dts            |  16 +
 arch/arm/boot/dts/tegra30.dtsi                |  93 ++-
 arch/arm/configs/multi_v7_defconfig           |   1 +
 arch/arm/configs/tegra_defconfig              |   1 +
 drivers/thermal/tegra/Kconfig                 |   7 +
 drivers/thermal/tegra/Makefile                |   1 +
 drivers/thermal/tegra/tegra30-tsensor.c       | 736 ++++++++++++++++++
 drivers/thermal/thermal_of.c                  |   3 +
 drivers/thermal/thermal_sysfs.c               |   1 +
 10 files changed, 933 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml
 create mode 100644 drivers/thermal/tegra/tegra30-tsensor.c

-- 
2.30.2