linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
To: linux-arm-msm@vger.kernel.org
Cc: bhupesh.sharma@linaro.org, bhupesh.linux@gmail.com,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, lgirdwood@gmail.com,
	Mark Brown <broonie@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>
Subject: [PATCH v3 3/5] regulator: qcom-rpmh: Cleanup terminator line commas
Date: Thu, 17 Jun 2021 10:47:10 +0530	[thread overview]
Message-ID: <20210617051712.345372-4-bhupesh.sharma@linaro.org> (raw)
In-Reply-To: <20210617051712.345372-1-bhupesh.sharma@linaro.org>

Cleanup the qcom-rpmh regulator driver to remove comma(s)
at the end of the terminator line(s).

Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 drivers/regulator/qcom-rpmh-regulator.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 22fec370fa61..6a8b7ac67bbe 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -811,12 +811,12 @@ static const struct rpmh_vreg_init_data pm8998_vreg_data[] = {
 	RPMH_VREG("ldo28",  "ldo%s28", &pmic4_pldo,      "vdd-l16-l28"),
 	RPMH_VREG("lvs1",   "vs%s1",   &pmic4_lvs,       "vin-lvs-1-2"),
 	RPMH_VREG("lvs2",   "vs%s2",   &pmic4_lvs,       "vin-lvs-1-2"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pmi8998_vreg_data[] = {
 	RPMH_VREG("bob",    "bob%s1",  &pmic4_bob,       "vdd-bob"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
@@ -824,7 +824,7 @@ static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
 	RPMH_VREG("smps2",  "smp%s2",  &pmic4_ftsmps426, "vdd-s2"),
 	RPMH_VREG("smps3",  "smp%s3",  &pmic4_ftsmps426, "vdd-s3"),
 	RPMH_VREG("smps4",  "smp%s4",  &pmic4_ftsmps426, "vdd-s4"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
@@ -856,7 +856,7 @@ static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
 	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,      "vdd-l13-l16-l17"),
 	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,      "vdd-l13-l16-l17"),
 	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
@@ -880,7 +880,7 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
 	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l9-l10"),
 	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      "vdd-l7-l11"),
 	RPMH_VREG("bob",    "bob%s1",  &pmic5_bob,       "vdd-bob"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
@@ -906,7 +906,7 @@ static const struct rpmh_vreg_init_data pm8350_vreg_data[] = {
 	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_nldo,      "vdd-l8"),
 	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_nldo,      "vdd-l6-l9-l10"),
 	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_nldo,      "vdd-l6-l9-l10"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = {
@@ -934,7 +934,7 @@ static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = {
 	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo_lv,   "vdd-l1-l12"),
 	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l3-l4-l5-l7-l13"),
 	RPMH_VREG("bob",    "bob%s1",  &pmic5_bob,       "vdd-bob"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
@@ -947,7 +947,7 @@ static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
 	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo_lv,   "vdd-l7"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
@@ -960,7 +960,7 @@ static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
 	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo7",   "ldo%s6",  &pmic5_pldo_lv,   "vdd-l7"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm6150_vreg_data[] = {
@@ -988,7 +988,7 @@ static const struct rpmh_vreg_init_data pm6150_vreg_data[] = {
 	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,   "vdd-l5-l16-l17-l18-l19"),
 	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_pldo,   "vdd-l5-l16-l17-l18-l19"),
 	RPMH_VREG("ldo19",  "ldo%s19", &pmic5_pldo,   "vdd-l5-l16-l17-l18-l19"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
@@ -1012,7 +1012,7 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
 	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l9-l10"),
 	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      "vdd-l7-l11"),
 	RPMH_VREG("bob",    "bob%s1",  &pmic5_bob,       "vdd-bob"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
@@ -1039,7 +1039,7 @@ static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
 	RPMH_VREG("ldo14",   "ldo%s14",   &pmic5_nldo,      "vdd-l14"),
 	RPMH_VREG("ldo15",   "ldo%s15",   &pmic5_nldo,      "vdd-l15"),
 	RPMH_VREG("ldo16",   "ldo%s16",   &pmic5_pldo,      "vdd-l16"),
-	{},
+	{}
 };
 
 static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
-- 
2.31.1


  parent reply	other threads:[~2021-06-17  5:18 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-17  5:17 [PATCH v3 0/5] regulator: qcom,rpmh-regulator: Add support for pmic available on SA8155p-adp board Bhupesh Sharma
2021-06-17  5:17 ` [PATCH v3 1/5] dt-bindings: regulator: qcom,rpmh-regulator: Arrange compatibles alphabetically Bhupesh Sharma
2021-06-18 18:04   ` Bjorn Andersson
2021-06-24 21:23   ` Rob Herring
2021-06-17  5:17 ` [PATCH v3 2/5] dt-bindings: regulator: qcom,rpmh-regulator: Add compatible for SA8155p-adp board pmic Bhupesh Sharma
2021-06-18 18:05   ` Bjorn Andersson
2021-06-24 21:23   ` Rob Herring
2021-06-17  5:17 ` Bhupesh Sharma [this message]
2021-06-17  5:17 ` [PATCH v3 4/5] regulator: qcom-rpmh: Add terminator at the end of pm7325x_vreg_data[] array Bhupesh Sharma
2021-06-17  5:17 ` [PATCH v3 5/5] regulator: qcom-rpmh: Add new regulator found on SA8155p adp board Bhupesh Sharma
2021-06-18 18:06   ` Bjorn Andersson
2021-06-21 18:45 ` [PATCH v3 0/5] regulator: qcom,rpmh-regulator: Add support for pmic available on SA8155p-adp board Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210617051712.345372-4-bhupesh.sharma@linaro.org \
    --to=bhupesh.sharma@linaro.org \
    --cc=bhupesh.linux@gmail.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).