From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
To: linux-arm-msm@vger.kernel.org
Cc: bhupesh.sharma@linaro.org, bhupesh.linux@gmail.com,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, lgirdwood@gmail.com,
robh+dt@kernel.org, Linus Walleij <linus.walleij@linaro.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>
Subject: [PATCH v4 3/4] pinctrl: qcom/pinctrl-spmi-gpio: Arrange compatibles alphabetically
Date: Tue, 29 Jun 2021 18:04:06 +0530 [thread overview]
Message-ID: <20210629123407.82561-4-bhupesh.sharma@linaro.org> (raw)
In-Reply-To: <20210629123407.82561-1-bhupesh.sharma@linaro.org>
Arrange the compatibles inside qcom pinctrl-spmi gpio driver
alphabetically.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 34 ++++++++++++------------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index a89d24a040af..5246ea09c295 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1104,23 +1104,15 @@ static int pmic_gpio_remove(struct platform_device *pdev)
}
static const struct of_device_id pmic_gpio_of_match[] = {
- { .compatible = "qcom,pm8005-gpio", .data = (void *) 4 },
- { .compatible = "qcom,pm8916-gpio", .data = (void *) 4 },
- { .compatible = "qcom,pm8941-gpio", .data = (void *) 36 },
- /* pm8950 has 8 GPIOs with holes on 3 */
- { .compatible = "qcom,pm8950-gpio", .data = (void *) 8 },
- { .compatible = "qcom,pmi8950-gpio", .data = (void *) 2 },
- { .compatible = "qcom,pm8994-gpio", .data = (void *) 22 },
- { .compatible = "qcom,pmi8994-gpio", .data = (void *) 10 },
- { .compatible = "qcom,pm8998-gpio", .data = (void *) 26 },
- { .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 },
- { .compatible = "qcom,pma8084-gpio", .data = (void *) 22 },
- /* pms405 has 12 GPIOs with holes on 1, 9, and 10 */
- { .compatible = "qcom,pms405-gpio", .data = (void *) 12 },
/* pm660 has 13 GPIOs with holes on 1, 5, 6, 7, 8 and 10 */
{ .compatible = "qcom,pm660-gpio", .data = (void *) 13 },
/* pm660l has 12 GPIOs with holes on 1, 2, 10, 11 and 12 */
{ .compatible = "qcom,pm660l-gpio", .data = (void *) 12 },
+ { .compatible = "qcom,pm6150-gpio", .data = (void *) 10 },
+ { .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 },
+ { .compatible = "qcom,pm7325-gpio", .data = (void *) 10 },
+ { .compatible = "qcom,pm8005-gpio", .data = (void *) 4 },
+ { .compatible = "qcom,pm8008-gpio", .data = (void *) 2 },
/* pm8150 has 10 GPIOs with holes on 2, 5, 7 and 8 */
{ .compatible = "qcom,pm8150-gpio", .data = (void *) 10 },
/* pm8150b has 12 GPIOs with holes on 3, r and 7 */
@@ -1130,13 +1122,21 @@ static const struct of_device_id pmic_gpio_of_match[] = {
{ .compatible = "qcom,pm8350-gpio", .data = (void *) 10 },
{ .compatible = "qcom,pm8350b-gpio", .data = (void *) 8 },
{ .compatible = "qcom,pm8350c-gpio", .data = (void *) 9 },
+ { .compatible = "qcom,pm8916-gpio", .data = (void *) 4 },
+ { .compatible = "qcom,pm8941-gpio", .data = (void *) 36 },
+ /* pm8950 has 8 GPIOs with holes on 3 */
+ { .compatible = "qcom,pm8950-gpio", .data = (void *) 8 },
+ { .compatible = "qcom,pm8994-gpio", .data = (void *) 22 },
+ { .compatible = "qcom,pm8998-gpio", .data = (void *) 26 },
+ { .compatible = "qcom,pma8084-gpio", .data = (void *) 22 },
+ { .compatible = "qcom,pmi8950-gpio", .data = (void *) 2 },
+ { .compatible = "qcom,pmi8994-gpio", .data = (void *) 10 },
+ { .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 },
{ .compatible = "qcom,pmk8350-gpio", .data = (void *) 4 },
- { .compatible = "qcom,pm7325-gpio", .data = (void *) 10 },
{ .compatible = "qcom,pmr735a-gpio", .data = (void *) 4 },
{ .compatible = "qcom,pmr735b-gpio", .data = (void *) 4 },
- { .compatible = "qcom,pm6150-gpio", .data = (void *) 10 },
- { .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 },
- { .compatible = "qcom,pm8008-gpio", .data = (void *) 2 },
+ /* pms405 has 12 GPIOs with holes on 1, 9, and 10 */
+ { .compatible = "qcom,pms405-gpio", .data = (void *) 12 },
/* pmx55 has 11 GPIOs with holes on 3, 7, 10, 11 */
{ .compatible = "qcom,pmx55-gpio", .data = (void *) 11 },
{ },
--
2.31.1
next prev parent reply other threads:[~2021-06-29 12:34 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-29 12:34 [PATCH v4 0/4] pinctrl: qcom/pinctrl-spmi-gpio: Add support for pmic-gpio on SA8155p-adp Bhupesh Sharma
2021-06-29 12:34 ` [PATCH v4 1/4] dt-bindings: pinctrl: qcom,pmic-gpio: Arrange compatibles alphabetically Bhupesh Sharma
2021-06-29 12:34 ` [PATCH v4 2/4] dt-bindings: pinctrl: qcom,pmic-gpio: Add compatible for SA8155p-adp Bhupesh Sharma
2021-06-29 12:34 ` Bhupesh Sharma [this message]
2021-06-29 12:34 ` [PATCH v4 4/4] pinctrl: qcom/pinctrl-spmi-gpio: Add compatible for pmic-gpio on SA8155p-adp Bhupesh Sharma
2021-07-14 5:40 ` [PATCH v4 0/4] pinctrl: qcom/pinctrl-spmi-gpio: Add support " Bhupesh Sharma
2021-07-23 16:21 ` Linus Walleij
2021-07-24 7:21 ` Bhupesh Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210629123407.82561-4-bhupesh.sharma@linaro.org \
--to=bhupesh.sharma@linaro.org \
--cc=bhupesh.linux@gmail.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).