From: Thara Gopinath <thara.gopinath@linaro.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
rui.zhang@intel.com, daniel.lezcano@linaro.org,
viresh.kumar@linaro.org, rjw@rjwysocki.net, robh+dt@kernel.org
Cc: tdas@codeaurora.org, mka@chromium.org,
linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [Patch v3 1/6] firmware: qcom_scm: Introduce SCM calls to access LMh
Date: Thu, 8 Jul 2021 08:06:51 -0400 [thread overview]
Message-ID: <20210708120656.663851-2-thara.gopinath@linaro.org> (raw)
In-Reply-To: <20210708120656.663851-1-thara.gopinath@linaro.org>
Introduce SCM calls to access/configure limits management hardware(LMH).
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
---
v2->v3:
Added freeing of payload_buf after the scm call in qcom_scm_lmh_dcvsh as per
Matthias review comments.
v1->v2:
Changed the input parameters in qcom_scm_lmh_dcvsh from payload_buf and
payload_size to payload_fn, payload_reg, payload_val as per Bjorn's review
comments.
drivers/firmware/qcom_scm.c | 58 +++++++++++++++++++++++++++++++++++++
drivers/firmware/qcom_scm.h | 4 +++
include/linux/qcom_scm.h | 14 +++++++++
3 files changed, 76 insertions(+)
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index ee9cb545e73b..a8d236603e90 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -1147,6 +1147,64 @@ int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
}
EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle);
+bool qcom_scm_lmh_dcvsh_available(void)
+{
+ return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_LMH, QCOM_SCM_LMH_LIMIT_DCVSH);
+}
+EXPORT_SYMBOL(qcom_scm_lmh_dcvsh_available);
+
+int qcom_scm_lmh_profile_change(u32 profile_id)
+{
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_LMH,
+ .cmd = QCOM_SCM_LMH_LIMIT_PROFILE_CHANGE,
+ .arginfo = QCOM_SCM_ARGS(1, QCOM_SCM_VAL),
+ .args[0] = profile_id,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+ return qcom_scm_call(__scm->dev, &desc, NULL);
+}
+EXPORT_SYMBOL(qcom_scm_lmh_profile_change);
+
+int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
+ u64 limit_node, u32 node_id, u64 version)
+{
+ dma_addr_t payload_phys;
+ u32 *payload_buf;
+ int ret, payload_size = 5 * sizeof(u32);
+
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_LMH,
+ .cmd = QCOM_SCM_LMH_LIMIT_DCVSH,
+ .arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_VAL,
+ QCOM_SCM_VAL, QCOM_SCM_VAL),
+ .args[1] = payload_size,
+ .args[2] = limit_node,
+ .args[3] = node_id,
+ .args[4] = version,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+ payload_buf = dma_alloc_coherent(__scm->dev, payload_size, &payload_phys, GFP_KERNEL);
+ if (!payload_buf)
+ return -ENOMEM;
+
+ payload_buf[0] = payload_fn;
+ payload_buf[1] = 0;
+ payload_buf[2] = payload_reg;
+ payload_buf[3] = 1;
+ payload_buf[4] = payload_val;
+
+ desc.args[0] = payload_phys;
+
+ ret = qcom_scm_call(__scm->dev, &desc, NULL);
+
+ dma_free_coherent(__scm->dev, payload_size, payload_buf, payload_phys);
+ return ret;
+}
+EXPORT_SYMBOL(qcom_scm_lmh_dcvsh);
+
static int qcom_scm_find_dload_address(struct device *dev, u64 *addr)
{
struct device_node *tcsr;
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 632fe3142462..d92156ceb3ac 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -114,6 +114,10 @@ extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
#define QCOM_SCM_SVC_HDCP 0x11
#define QCOM_SCM_HDCP_INVOKE 0x01
+#define QCOM_SCM_SVC_LMH 0x13
+#define QCOM_SCM_LMH_LIMIT_PROFILE_CHANGE 0x01
+#define QCOM_SCM_LMH_LIMIT_DCVSH 0x10
+
#define QCOM_SCM_SVC_SMMU_PROGRAM 0x15
#define QCOM_SCM_SMMU_CONFIG_ERRATA1 0x03
#define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL 0x02
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index 0165824c5128..c0475d1c9885 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -109,6 +109,12 @@ extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
u32 *resp);
extern int qcom_scm_qsmmu500_wait_safe_toggle(bool en);
+
+extern int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
+ u64 limit_node, u32 node_id, u64 version);
+extern int qcom_scm_lmh_profile_change(u32 profile_id);
+extern bool qcom_scm_lmh_dcvsh_available(void);
+
#else
#include <linux/errno.h>
@@ -170,5 +176,13 @@ static inline int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
static inline int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
{ return -ENODEV; }
+
+static inline int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
+ u64 limit_node, u32 node_id, u64 version)
+ { return -ENODEV; }
+
+static inline int qcom_scm_lmh_profile_change(u32 profile_id) { return -ENODEV; }
+
+static inline bool qcom_scm_lmh_dcvsh_available(void) { return -ENODEV; }
#endif
#endif
--
2.25.1
next prev parent reply other threads:[~2021-07-08 12:07 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-08 12:06 [Patch v3 0/6] Introduce LMh driver for Qualcomm SoCs Thara Gopinath
2021-07-08 12:06 ` Thara Gopinath [this message]
2021-07-10 4:02 ` [Patch v3 1/6] firmware: qcom_scm: Introduce SCM calls to access LMh Bjorn Andersson
2021-07-08 12:06 ` [Patch v3 2/6] thermal: qcom: Add support for LMh driver Thara Gopinath
2021-07-10 4:15 ` Bjorn Andersson
2021-07-13 0:49 ` Thara Gopinath
2021-07-08 12:06 ` [Patch v3 3/6] cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support Thara Gopinath
2021-07-09 6:46 ` Viresh Kumar
2021-07-09 15:37 ` Thara Gopinath
2021-07-12 4:35 ` Viresh Kumar
2021-07-12 4:41 ` Viresh Kumar
2021-07-13 1:18 ` Thara Gopinath
2021-07-13 3:18 ` Viresh Kumar
2021-07-14 12:37 ` Thara Gopinath
2021-07-10 4:57 ` Bjorn Andersson
2021-07-13 1:09 ` Thara Gopinath
2021-07-08 12:06 ` [Patch v3 4/6] arm64: boot: dts: qcom: sdm45: Add support for LMh node Thara Gopinath
2021-07-10 4:17 ` Bjorn Andersson
2021-07-19 16:33 ` Bjorn Andersson
2021-07-19 22:44 ` Thara Gopinath
2021-07-08 12:06 ` [Patch v3 5/6] arm64: boot: dts: qcom: sdm845: Remove cpufreq cooling devices for CPU thermal zones Thara Gopinath
2021-07-10 4:17 ` Bjorn Andersson
2021-07-08 12:06 ` [Patch v3 6/6] dt-bindings: thermal: Add dt binding for QCOM LMh Thara Gopinath
2021-07-10 4:21 ` Bjorn Andersson
2021-07-13 0:54 ` Thara Gopinath
2021-07-12 17:32 ` Rob Herring
2021-07-22 3:14 ` [Patch v3 0/6] Introduce LMh driver for Qualcomm SoCs Steev Klimaszewski
2021-07-27 15:29 ` Thara Gopinath
2021-07-27 17:43 ` Steev Klimaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210708120656.663851-2-thara.gopinath@linaro.org \
--to=thara.gopinath@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mka@chromium.org \
--cc=rjw@rjwysocki.net \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=tdas@codeaurora.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).