From: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: <alsa-devel@alsa-project.org>, <patches@opensource.cirrus.com>,
<linux-kernel@vger.kernel.org>,
Lucas Tanure <tanureal@opensource.cirrus.com>
Subject: [PATCH v2 14/27] ALSA: hda/cs8409: Avoid setting the same I2C address for every access
Date: Wed, 28 Jul 2021 14:43:55 +0100 [thread overview]
Message-ID: <20210728134408.369396-15-vitalyr@opensource.cirrus.com> (raw)
In-Reply-To: <20210728134408.369396-1-vitalyr@opensource.cirrus.com>
From: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Changes in v2:
- No changes
---
sound/pci/hda/patch_cs8409.c | 19 +++++++++++++++++--
sound/pci/hda/patch_cs8409.h | 1 +
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/sound/pci/hda/patch_cs8409.c b/sound/pci/hda/patch_cs8409.c
index fafc0f309e70..bd43c42d5c74 100644
--- a/sound/pci/hda/patch_cs8409.c
+++ b/sound/pci/hda/patch_cs8409.c
@@ -132,6 +132,21 @@ static int cs8409_i2c_wait_complete(struct hda_codec *codec)
return -1;
}
+/**
+ * cs8409_set_i2c_dev_addr - Set i2c address for transaction
+ * @codec: the codec instance
+ * @addr: I2C Address
+ */
+static void cs8409_set_i2c_dev_addr(struct hda_codec *codec, unsigned int addr)
+{
+ struct cs8409_spec *spec = codec->spec;
+
+ if (spec->dev_addr != addr) {
+ cs8409_vendor_coef_set(codec, CS8409_I2C_ADDR, addr);
+ spec->dev_addr = addr;
+ }
+}
+
/**
* cs8409_i2c_read - CS8409 I2C Read.
* @codec: the codec instance
@@ -153,7 +168,7 @@ static int cs8409_i2c_read(struct hda_codec *codec, unsigned int i2c_address, un
return -EPERM;
cs8409_enable_i2c_clock(codec);
- cs8409_vendor_coef_set(codec, CS8409_I2C_ADDR, i2c_address);
+ cs8409_set_i2c_dev_addr(codec, i2c_address);
if (paged) {
cs8409_vendor_coef_set(codec, CS8409_I2C_QWRITE, i2c_reg >> 8);
@@ -199,7 +214,7 @@ static int cs8409_i2c_write(struct hda_codec *codec, unsigned int i2c_address, u
return -EPERM;
cs8409_enable_i2c_clock(codec);
- cs8409_vendor_coef_set(codec, CS8409_I2C_ADDR, i2c_address);
+ cs8409_set_i2c_dev_addr(codec, i2c_address);
if (paged) {
cs8409_vendor_coef_set(codec, CS8409_I2C_QWRITE, i2c_reg >> 8);
diff --git a/sound/pci/hda/patch_cs8409.h b/sound/pci/hda/patch_cs8409.h
index 542582c213d2..c2c208218e34 100644
--- a/sound/pci/hda/patch_cs8409.h
+++ b/sound/pci/hda/patch_cs8409.h
@@ -281,6 +281,7 @@ struct cs8409_spec {
struct mutex cs8409_i2c_mux;
unsigned int i2c_clck_enabled;
+ unsigned int dev_addr;
struct delayed_work i2c_clk_work;
/* verb exec op override */
--
2.25.1
next prev parent reply other threads:[~2021-07-28 13:45 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-28 13:43 [PATCH v2 00/27] ALSA: hda/cirrus: Split generic cirrus HDA codecs and CS8490 bridge into separate modules Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 01/27] ALSA: hda/cirrus: Move CS8409 HDA bridge to separate module Vitaly Rodionov
2021-07-29 9:50 ` Takashi Iwai
2021-07-28 13:43 ` [PATCH v2 02/27] ALSA: hda/cs8409: Move arrays of configuration to a new file Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 03/27] ALSA: hda/cs8409: Use enums for register names and coefficients Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 04/27] ALSA: hda/cs8409: Mask all CS42L42 interrupts on initialization Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 05/27] ALSA: hda/cs8409: Reduce HS pops/clicks for Cyborg Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 06/27] ALSA: hda/cs8409: Disable unnecessary Ring Sense for Cyborg/Warlock/Bullseye Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 07/27] ALSA: hda/cs8409: Disable unsolicited responses during suspend Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 08/27] ALSA: hda/cs8409: Disable unsolicited response for the first boot Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 09/27] ALSA: hda/cs8409: Mask CS42L42 wake events Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 10/27] ALSA: hda/cs8409: Simplify CS42L42 jack detect Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 11/27] ALSA: hda/cs8409: Prevent I2C access during suspend time Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 12/27] ALSA: hda/cs8409: Generalize volume controls Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 13/27] ALSA: hda/cs8409: Dont disable I2C clock between consecutive accesses Vitaly Rodionov
2021-07-29 9:48 ` Takashi Iwai
2021-07-28 13:43 ` Vitaly Rodionov [this message]
2021-07-28 13:43 ` [PATCH v2 15/27] ALSA: hda/cs8409: Avoid re-setting the same page as the last access Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 16/27] ALSA: hda/cs8409: Support i2c bulk read/write functions Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 17/27] ALSA: hda/cs8409: Separate CS8409, CS42L42 and project functions Vitaly Rodionov
2021-07-28 13:43 ` [PATCH v2 18/27] ALSA: hda/cs8409: Move codec properties to its own struct Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 19/27] ALSA: hda/cs8409: Support multiple sub_codecs for Suspend/Resume/Unsol events Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 20/27] ALSA: hda/cs8409: Add Support to disable jack type detection for CS42L42 Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 21/27] ALSA: hda/cs8409: Add support for dolphin Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 22/27] ALSA: hda/cs8409: Enable Full Scale Volume for Line Out Codec on Dolphin Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 23/27] ALSA: hda/cs8409: Set fixed sample rate of 48kHz for CS42L42 Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 24/27] ALSA: hda/cs8409: Use timeout rather than retries for I2C transaction waits Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 25/27] ALSA: hda/cs8409: Remove unnecessary delays Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 26/27] ALSA: hda/cs8409: Follow correct CS42L42 power down sequence for suspend Vitaly Rodionov
2021-07-28 13:44 ` [PATCH v2 27/27] ALSA: hda/cs8409: Unmute/Mute codec when stream starts/stops Vitaly Rodionov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210728134408.369396-15-vitalyr@opensource.cirrus.com \
--to=vitalyr@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=tanureal@opensource.cirrus.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).