linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: James Morse <james.morse@arm.com>
To: x86@kernel.org, linux-kernel@vger.kernel.org
Cc: Fenghua Yu <fenghua.yu@intel.com>,
	Reinette Chatre <reinette.chatre@intel.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	H Peter Anvin <hpa@zytor.com>, Babu Moger <Babu.Moger@amd.com>,
	James Morse <james.morse@arm.com>,
	shameerali.kolothum.thodi@huawei.com,
	Jamie Iles <jamie@nuviainc.com>,
	D Scott Phillips OS <scott@os.amperecomputing.com>,
	lcherian@marvell.com, bobo.shaobowang@huawei.com
Subject: [PATCH v7 07/24] x86/resctrl: Store the effective num_closid in the schema
Date: Wed, 28 Jul 2021 17:06:20 +0000	[thread overview]
Message-ID: <20210728170637.25610-8-james.morse@arm.com> (raw)
In-Reply-To: <20210728170637.25610-1-james.morse@arm.com>

Struct resctrl_schema holds properties that vary with the style of
configuration that resctrl applies to a resource. There are already
two values for the hardware's num_closid, depending on whether the
architecture presents the L3 or L3CODE/L3DATA resources.

As the way CDP changes the number of control groups that resctrl can create
is part of the user-space interface, it should be managed by the filesystem
parts of resctrl. This allows the architecture code to only describe the
value the hardware supports.

Add num_closid to resctrl_schema. This is the value seen by the filesystem,
which may be different to the maximum value described by the arch code
when CDP is enabled.
These functions operate on the num_closid value that is exposed to
user-space:
* rdtgroup_parse_resource()
* rdtgroup_schemata_show()
* rdt_num_closids_show()
* closid_init()
These are changed to use the schema value instead. schemata_list_create()
sets this value, and reaches into the architecture specific structure to
get the value. This will eventually be replaced with a helper.

Reviewed-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: James Morse <james.morse@arm.com>
---
Changes since v3:
 * Fixed two spelling mistakes.

Changes since v2:
 * Expanded kerneldoc comment.
 * Shuffled commit message,

Changes since v1:
 * Added missing : in a comment.
 * Expanded commit message.
 * Reordered patches
---
 arch/x86/kernel/cpu/resctrl/ctrlmondata.c |  9 +++------
 arch/x86/kernel/cpu/resctrl/rdtgroup.c    | 13 ++++---------
 include/linux/resctrl.h                   |  4 ++++
 3 files changed, 11 insertions(+), 15 deletions(-)

diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
index 405b99d31ef9..d10fddaef5f4 100644
--- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
+++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
@@ -286,14 +286,12 @@ int update_domains(struct rdt_resource *r, int closid)
 static int rdtgroup_parse_resource(char *resname, char *tok,
 				   struct rdtgroup *rdtgrp)
 {
-	struct rdt_hw_resource *hw_res;
 	struct resctrl_schema *s;
 	struct rdt_resource *r;
 
 	list_for_each_entry(s, &resctrl_schema_all, list) {
 		r = s->res;
-		hw_res = resctrl_to_arch_res(s->res);
-		if (!strcmp(resname, r->name) && rdtgrp->closid < hw_res->num_closid)
+		if (!strcmp(resname, r->name) && rdtgrp->closid < s->num_closid)
 			return parse_line(tok, r, rdtgrp);
 	}
 	rdt_last_cmd_printf("Unknown or unsupported resource name '%s'\n", resname);
@@ -404,7 +402,6 @@ static void show_doms(struct seq_file *s, struct rdt_resource *r, int closid)
 int rdtgroup_schemata_show(struct kernfs_open_file *of,
 			   struct seq_file *s, void *v)
 {
-	struct rdt_hw_resource *hw_res;
 	struct resctrl_schema *schema;
 	struct rdtgroup *rdtgrp;
 	struct rdt_resource *r;
@@ -432,8 +429,8 @@ int rdtgroup_schemata_show(struct kernfs_open_file *of,
 		} else {
 			closid = rdtgrp->closid;
 			list_for_each_entry(schema, &resctrl_schema_all, list) {
-				hw_res = resctrl_to_arch_res(schema->res);
-				if (closid < hw_res->num_closid)
+				r = schema->res;
+				if (closid < schema->num_closid)
 					show_doms(s, r, closid);
 			}
 		}
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 7502b7de3916..2f29b7d7d602 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -103,15 +103,12 @@ int closids_supported(void)
 
 static void closid_init(void)
 {
-	struct rdt_hw_resource *hw_res;
 	struct resctrl_schema *s;
 	int rdt_min_closid = 32;
 
 	/* Compute rdt_min_closid across all resources */
-	list_for_each_entry(s, &resctrl_schema_all, list) {
-		hw_res = resctrl_to_arch_res(s->res);
-		rdt_min_closid = min(rdt_min_closid, hw_res->num_closid);
-	}
+	list_for_each_entry(s, &resctrl_schema_all, list)
+		rdt_min_closid = min(rdt_min_closid, s->num_closid);
 
 	closid_free_map = BIT_MASK(rdt_min_closid) - 1;
 
@@ -849,11 +846,8 @@ static int rdt_num_closids_show(struct kernfs_open_file *of,
 				struct seq_file *seq, void *v)
 {
 	struct resctrl_schema *s = of->kn->parent->priv;
-	struct rdt_resource *r = s->res;
-	struct rdt_hw_resource *hw_res;
 
-	hw_res = resctrl_to_arch_res(r);
-	seq_printf(seq, "%d\n", hw_res->num_closid);
+	seq_printf(seq, "%u\n", s->num_closid);
 	return 0;
 }
 
@@ -2140,6 +2134,7 @@ static int schemata_list_create(void)
 
 		s->res = r;
 		s->conf_type = resctrl_to_arch_res(r)->conf_type;
+		s->num_closid = resctrl_to_arch_res(r)->num_closid;
 
 		INIT_LIST_HEAD(&s->list);
 		list_add(&s->list, &resctrl_schema_all);
diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
index 095ed48168d7..59d0fa78bb69 100644
--- a/include/linux/resctrl.h
+++ b/include/linux/resctrl.h
@@ -172,10 +172,14 @@ struct rdt_resource {
  * @conf_type:	Whether this schema is specific to code/data.
  * @res:	The resource structure exported by the architecture to describe
  *		the hardware that is configured by this schema.
+ * @num_closid:	The number of closid that can be used with this schema. When
+ *		features like CDP are enabled, this will be lower than the
+ *		hardware supports for the resource.
  */
 struct resctrl_schema {
 	struct list_head		list;
 	enum resctrl_conf_type		conf_type;
 	struct rdt_resource		*res;
+	int				num_closid;
 };
 #endif /* _RESCTRL_H */
-- 
2.30.2


  parent reply	other threads:[~2021-07-28 17:08 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-28 17:06 [PATCH v7 00/24] x86/resctrl: Merge the CDP resources James Morse
2021-07-28 17:06 ` [PATCH v7 01/24] x86/resctrl: Split struct rdt_resource James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 02/24] x86/resctrl: Split struct rdt_domain James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 03/24] x86/resctrl: Add a separate schema list for resctrl James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 04/24] x86/resctrl: Pass the schema in info dir's private pointer James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 05/24] x86/resctrl: Label the resources with their configuration type James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 06/24] x86/resctrl: Walk the resctrl schema list instead of an arch list James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` James Morse [this message]
2021-08-11 19:41   ` [tip: x86/cache] x86/resctrl: Store the effective num_closid in the schema tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 08/24] x86/resctrl: Add resctrl_arch_get_num_closid() James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 09/24] x86/resctrl: Pass the schema to resctrl filesystem functions James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 10/24] x86/resctrl: Swizzle rdt_resource and resctrl_schema in pseudo_lock_region James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 11/24] x86/resctrl: Add a helper to read/set the CDP configuration James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 12/24] x86/resctrl: Move the schemata names into struct resctrl_schema James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 13/24] x86/resctrl: Group staged configuration into a separate struct James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 14/24] x86/resctrl: Allow different CODE/DATA configurations to be staged James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 15/24] x86/resctrl: Rename update_domains() resctrl_arch_update_domains() James Morse
2021-08-11 19:41   ` [tip: x86/cache] x86/resctrl: Rename update_domains() to resctrl_arch_update_domains() tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 16/24] x86/resctrl: Add a helper to read a closid's configuration James Morse
2021-08-11 15:50   ` Borislav Petkov
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 17/24] x86/resctrl: Pass configuration type to resctrl_arch_get_config() James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 18/24] x86/resctrl: Make ctrlval arrays the same size James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 19/24] x86/resctrl: Apply offset correction when config is staged James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 20/24] x86/resctrl: Calculate the index from the configuration type James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 21/24] x86/resctrl: Merge the ctrl_val arrays James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 22/24] x86/resctrl: Remove rdt_cdp_peer_get() James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 23/24] x86/resctrl: Expand resctrl_arch_update_domains()'s msr_param range James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-07-28 17:06 ` [PATCH v7 24/24] x86/resctrl: Merge the CDP resources James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-08-11 16:38 ` [PATCH v7 25/24] x86/resctrl: Make resctrl_arch_get_config() return its value James Morse
2021-08-11 19:41   ` [tip: x86/cache] " tip-bot2 for James Morse
2021-09-17 16:59 ` [PATCH] x86/resctrl: Fix kfree() of the wrong type in domain_add_cpu() James Morse
2021-09-21 19:04   ` Reinette Chatre
2021-10-04 16:47   ` [tip: x86/urgent] " tip-bot2 for James Morse
2021-10-06 17:39   ` tip-bot2 for James Morse
2021-09-17 16:59 ` [PATCH] x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails James Morse
2021-09-21 19:03   ` Reinette Chatre
2021-10-04 16:47   ` [tip: x86/urgent] " tip-bot2 for James Morse
2021-10-06 17:39   ` tip-bot2 for James Morse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210728170637.25610-8-james.morse@arm.com \
    --to=james.morse@arm.com \
    --cc=Babu.Moger@amd.com \
    --cc=bobo.shaobowang@huawei.com \
    --cc=bp@alien8.de \
    --cc=fenghua.yu@intel.com \
    --cc=hpa@zytor.com \
    --cc=jamie@nuviainc.com \
    --cc=lcherian@marvell.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=reinette.chatre@intel.com \
    --cc=scott@os.amperecomputing.com \
    --cc=shameerali.kolothum.thodi@huawei.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).