From: Maxim Levitsky <mlevitsk@redhat.com>
To: kvm@vger.kernel.org
Cc: Wanpeng Li <wanpengli@tencent.com>,
Thomas Gleixner <tglx@linutronix.de>,
Joerg Roedel <joro@8bytes.org>, Borislav Petkov <bp@alien8.de>,
Sean Christopherson <seanjc@google.com>,
Jim Mattson <jmattson@google.com>,
x86@kernel.org (maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)),
linux-kernel@vger.kernel.org (open list:X86 ARCHITECTURE (32-BIT
AND 64-BIT)),
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Maxim Levitsky <mlevitsk@redhat.com>
Subject: [PATCH v3 04/12] KVM: x86/mmu: allow kvm_faultin_pfn to return page fault handling code
Date: Mon, 2 Aug 2021 21:33:21 +0300 [thread overview]
Message-ID: <20210802183329.2309921-5-mlevitsk@redhat.com> (raw)
In-Reply-To: <20210802183329.2309921-1-mlevitsk@redhat.com>
This will allow it to return RET_PF_EMULATE for APIC mmio
emulation.
This code is based on a patch from Sean Christopherson:
https://lkml.org/lkml/2021/7/19/2970
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
---
arch/x86/kvm/mmu/mmu.c | 17 ++++++++++-------
arch/x86/kvm/mmu/paging_tmpl.h | 4 ++--
2 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index c5e0ecf5f758..6f77f6efd43c 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -3844,7 +3844,7 @@ static bool kvm_arch_setup_async_pf(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
static bool kvm_faultin_pfn(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
gpa_t cr2_or_gpa, kvm_pfn_t *pfn, hva_t *hva,
- bool write, bool *writable)
+ bool write, bool *writable, int *r)
{
struct kvm_memory_slot *slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
bool async;
@@ -3855,7 +3855,7 @@ static bool kvm_faultin_pfn(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
* be zapped before KVM inserts a new MMIO SPTE for the gfn.
*/
if (slot && (slot->flags & KVM_MEMSLOT_INVALID))
- return true;
+ goto out_retry;
/* Don't expose private memslots to L2. */
if (is_guest_mode(vcpu) && !kvm_is_visible_memslot(slot)) {
@@ -3875,14 +3875,17 @@ static bool kvm_faultin_pfn(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
if (kvm_find_async_pf_gfn(vcpu, gfn)) {
trace_kvm_async_pf_doublefault(cr2_or_gpa, gfn);
kvm_make_request(KVM_REQ_APF_HALT, vcpu);
- return true;
+ goto out_retry;
} else if (kvm_arch_setup_async_pf(vcpu, cr2_or_gpa, gfn))
- return true;
+ goto out_retry;
}
*pfn = __gfn_to_pfn_memslot(slot, gfn, false, NULL,
write, writable, hva);
- return false;
+
+out_retry:
+ *r = RET_PF_RETRY;
+ return true;
}
static int direct_page_fault(struct kvm_vcpu *vcpu, gpa_t gpa, u32 error_code,
@@ -3913,8 +3916,8 @@ static int direct_page_fault(struct kvm_vcpu *vcpu, gpa_t gpa, u32 error_code,
smp_rmb();
if (kvm_faultin_pfn(vcpu, prefault, gfn, gpa, &pfn, &hva,
- write, &map_writable))
- return RET_PF_RETRY;
+ write, &map_writable, &r))
+ return r;
if (handle_abnormal_pfn(vcpu, is_tdp ? 0 : gpa, gfn, pfn, ACC_ALL, &r))
return r;
diff --git a/arch/x86/kvm/mmu/paging_tmpl.h b/arch/x86/kvm/mmu/paging_tmpl.h
index f349eae69bf3..7d03e9b7ccfa 100644
--- a/arch/x86/kvm/mmu/paging_tmpl.h
+++ b/arch/x86/kvm/mmu/paging_tmpl.h
@@ -882,8 +882,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gpa_t addr, u32 error_code,
smp_rmb();
if (kvm_faultin_pfn(vcpu, prefault, walker.gfn, addr, &pfn, &hva,
- write_fault, &map_writable))
- return RET_PF_RETRY;
+ write_fault, &map_writable, &r))
+ return r;
if (handle_abnormal_pfn(vcpu, addr, walker.gfn, pfn, walker.pte_access, &r))
return r;
--
2.26.3
next prev parent reply other threads:[~2021-08-02 18:33 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-02 18:33 [PATCH v3 00/12] My AVIC patch queue Maxim Levitsky
2021-08-02 18:33 ` [PATCH v3 01/12] Revert "KVM: x86/mmu: Allow zap gfn range to operate under the mmu read lock" Maxim Levitsky
2021-08-03 8:05 ` Paolo Bonzini
2021-08-03 15:11 ` Sean Christopherson
2021-08-03 17:29 ` Paolo Bonzini
2021-08-02 18:33 ` [PATCH v3 02/12] KVM: x86/mmu: bump mmu notifier count in kvm_zap_gfn_range Maxim Levitsky
2021-08-03 9:00 ` Paolo Bonzini
2021-08-02 18:33 ` [PATCH v3 03/12] KVM: x86/mmu: rename try_async_pf to kvm_faultin_pfn Maxim Levitsky
2021-08-03 9:00 ` Paolo Bonzini
2021-08-02 18:33 ` Maxim Levitsky [this message]
2021-08-03 9:00 ` [PATCH v3 04/12] KVM: x86/mmu: allow kvm_faultin_pfn to return page fault handling code Paolo Bonzini
2021-08-02 18:33 ` [PATCH v3 05/12] KVM: x86/mmu: allow APICv memslot to be partially enabled Maxim Levitsky
2021-08-03 9:12 ` Paolo Bonzini
2021-08-02 18:33 ` [PATCH v3 06/12] KVM: x86: don't disable APICv memslot when inhibited Maxim Levitsky
2021-08-03 8:44 ` Paolo Bonzini
2021-08-09 18:51 ` Maxim Levitsky
2021-08-09 19:14 ` Sean Christopherson
2021-08-02 18:33 ` [PATCH v3 07/12] KVM: x86: APICv: fix race in kvm_request_apicv_update on SVM Maxim Levitsky
2021-08-02 18:33 ` [PATCH v3 08/12] KVM: SVM: add warning for mistmatch between AVIC state and AVIC access page state Maxim Levitsky
2021-08-03 8:45 ` Paolo Bonzini
2021-08-02 18:33 ` [PATCH v3 09/12] KVM: x86: hyper-v: Deactivate APICv only when AutoEOI feature is in use Maxim Levitsky
2021-08-03 8:47 ` Paolo Bonzini
2021-08-03 9:01 ` Paolo Bonzini
2021-08-03 9:11 ` Paolo Bonzini
2021-08-02 18:33 ` [PATCH v3 10/12] KVM: SVM: remove svm_toggle_avic_for_irq_window Maxim Levitsky
2021-08-03 9:11 ` Paolo Bonzini
2021-08-02 18:33 ` [PATCH v3 11/12] KVM: SVM: call avic_vcpu_load/avic_vcpu_put when enabling/disabling AVIC Maxim Levitsky
2021-08-03 9:00 ` Paolo Bonzini
2021-08-02 18:33 ` [PATCH v3 12/12] KVM: SVM: AVIC: drop unsupported AVIC base relocation code Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210802183329.2309921-5-mlevitsk@redhat.com \
--to=mlevitsk@redhat.com \
--cc=bp@alien8.de \
--cc=hpa@zytor.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=suravee.suthikulpanit@amd.com \
--cc=tglx@linutronix.de \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).