linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Marc Zyngier <maz@kernel.org>
Cc: Tom Joseph <tjoseph@cadence.com>, <linux-omap@vger.kernel.org>,
	<linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Lokesh Vutla <lokeshvutla@ti.com>
Subject: [PATCH v2 2/3] PCI: j721e: Add PCI legacy interrupt support for J721E
Date: Wed, 4 Aug 2021 18:59:11 +0530	[thread overview]
Message-ID: <20210804132912.30685-3-kishon@ti.com> (raw)
In-Reply-To: <20210804132912.30685-1-kishon@ti.com>

Add PCI legacy interrupt support for J721E. J721E has a single HW
interrupt line for all the four legacy interrupts INTA/INTB/INTC/INTD.
The HW interrupt line connected to GIC is a pulse interrupt whereas
the legacy interrupts by definition is level interrupt. In order to
provide level interrupt functionality to edge interrupt line, PCIe
in J721E has provided IRQ_EOI register.

However due to Errata ID #i2094 ([1]), EOI feature is not enabled in HW
and only a single pulse interrupt will be generated for every
ASSERT_INTx/DEASSERT_INTx.

[1] -> J721E DRA829/TDA4VM Processors Silicon Revision 1.1/1.0 SPRZ455A –
       DECEMBER 2020 – REVISED AUGUST 2021
       (https://www.ti.com/lit/er/sprz455a/sprz455a.pdf)

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/cadence/pci-j721e.c | 85 ++++++++++++++++++++++
 1 file changed, 85 insertions(+)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 2ec037c43bd5..c2e7a78dc31f 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -29,6 +29,13 @@
 #define LINK_DOWN		BIT(1)
 #define J7200_LINK_DOWN		BIT(10)
 
+#define EOI_REG			0x10
+
+#define ENABLE_REG_SYS_0	0x100
+#define STATUS_REG_SYS_0	0x500
+#define STATUS_CLR_REG_SYS_0	0x700
+#define INTx_EN(num)		(1 << (num))
+
 #define J721E_PCIE_USER_CMD_STATUS	0x4
 #define LINK_TRAINING_ENABLE		BIT(0)
 
@@ -59,6 +66,7 @@ struct j721e_pcie {
 	void __iomem		*user_cfg_base;
 	void __iomem		*intd_cfg_base;
 	u32			linkdown_irq_regfield;
+	struct irq_domain	*legacy_irq_domain;
 };
 
 enum j721e_pcie_mode {
@@ -121,6 +129,79 @@ static void j721e_pcie_config_link_irq(struct j721e_pcie *pcie)
 	j721e_pcie_intd_writel(pcie, ENABLE_REG_SYS_2, reg);
 }
 
+static void j721e_pcie_v1_legacy_irq_handler(struct irq_desc *desc)
+{
+	struct j721e_pcie *pcie = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	int i, virq;
+	u32 reg;
+
+	chained_irq_enter(chip, desc);
+
+	for (i = 0; i < PCI_NUM_INTX; i++) {
+		reg = j721e_pcie_intd_readl(pcie, STATUS_REG_SYS_0);
+		if (!(reg & INTx_EN(i)))
+			continue;
+
+		virq = irq_find_mapping(pcie->legacy_irq_domain, 3 - i);
+		generic_handle_irq(virq);
+		j721e_pcie_intd_writel(pcie, STATUS_CLR_REG_SYS_0, INTx_EN(i));
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static int j721e_pcie_intx_map(struct irq_domain *domain, unsigned int irq, irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, domain->host_data);
+
+	return 0;
+}
+
+static const struct irq_domain_ops j721e_pcie_intx_domain_ops = {
+	.map = j721e_pcie_intx_map,
+};
+
+static int j721e_pcie_config_legacy_irq(struct j721e_pcie *pcie)
+{
+	struct irq_domain *legacy_irq_domain;
+	struct device *dev = pcie->dev;
+	struct device_node *node = dev->of_node;
+	struct device_node *intc_node;
+	int irq, i;
+	u32 reg;
+
+	intc_node = of_get_child_by_name(node, "interrupt-controller");
+	if (!intc_node) {
+		dev_dbg(dev, "interrupt-controller node is absent. Legacy INTR not supported\n");
+		return 0;
+	}
+
+	irq = irq_of_parse_and_map(intc_node, 0);
+	if (!irq) {
+		dev_err(dev, "Failed to parse and map legacy irq\n");
+		return -EINVAL;
+	}
+	irq_set_chained_handler_and_data(irq, j721e_pcie_v1_legacy_irq_handler, pcie);
+
+	legacy_irq_domain = irq_domain_add_linear(intc_node, PCI_NUM_INTX,
+						  &j721e_pcie_intx_domain_ops, pcie);
+	if (!legacy_irq_domain) {
+		dev_err(dev, "Failed to add irq domain for legacy irqs\n");
+		return -EINVAL;
+	}
+	pcie->legacy_irq_domain = legacy_irq_domain;
+
+	for (i = 0; i < PCI_NUM_INTX; i++) {
+		reg = j721e_pcie_intd_readl(pcie, ENABLE_REG_SYS_0);
+		reg |= INTx_EN(i);
+		j721e_pcie_intd_writel(pcie, ENABLE_REG_SYS_0, reg);
+	}
+
+	return 0;
+}
+
 static int j721e_pcie_start_link(struct cdns_pcie *cdns_pcie)
 {
 	struct j721e_pcie *pcie = dev_get_drvdata(cdns_pcie->dev);
@@ -433,6 +514,10 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 			goto err_get_sync;
 		}
 
+		ret = j721e_pcie_config_legacy_irq(pcie);
+		if (ret < 0)
+			goto err_get_sync;
+
 		bridge = devm_pci_alloc_host_bridge(dev, sizeof(*rc));
 		if (!bridge) {
 			ret = -ENOMEM;
-- 
2.17.1


  parent reply	other threads:[~2021-08-04 13:29 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-04 13:29 [PATCH v2 0/3] PCI: Add legacy interrupt support in pci-j721e Kishon Vijay Abraham I
2021-08-04 13:29 ` [PATCH v2 1/3] dt-bindings: PCI: ti,j721e: Add bindings to specify legacy interrupts Kishon Vijay Abraham I
2021-08-04 15:05   ` Marc Zyngier
2021-08-09  4:38     ` Kishon Vijay Abraham I
2021-08-13 17:17   ` Rob Herring
2021-08-18 13:58     ` Kishon Vijay Abraham I
2021-09-23  4:33       ` Kishon Vijay Abraham I
2021-09-23 15:44         ` Rob Herring
2021-08-04 13:29 ` Kishon Vijay Abraham I [this message]
2021-08-04 15:13   ` [PATCH v2 2/3] PCI: j721e: Add PCI legacy interrupt support for J721E Marc Zyngier
2021-08-09  4:50     ` Kishon Vijay Abraham I
2021-08-09  9:39       ` Marc Zyngier
2021-08-09 14:58         ` Kishon Vijay Abraham I
2021-08-10 12:33           ` Marc Zyngier
2021-08-11 12:07             ` Kishon Vijay Abraham I
2021-08-04 13:29 ` [PATCH v2 3/3] PCI: j721e: Add PCI legacy interrupt support for J7200 Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210804132912.30685-3-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=maz@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tjoseph@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).