From: Iskren Chernev <iskren.chernev@gmail.com>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
Manu Gautam <mgautam@codeaurora.org>,
Rob Herring <robh+dt@kernel.org>, Vinod Koul <vkoul@kernel.org>,
devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
phone-devel@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
Iskren Chernev <iskren.chernev@gmail.com>
Subject: [PATCH v1 2/2] phy: qcom-qmp: Add support for SM6115 UFS phy
Date: Thu, 5 Aug 2021 12:17:27 +0300 [thread overview]
Message-ID: <20210805091727.942471-3-iskren.chernev@gmail.com> (raw)
In-Reply-To: <20210805091727.942471-1-iskren.chernev@gmail.com>
Add the tables and constants for init sequences for UFS QMP phy found in
SM4250/6115 SoC. The phy is a variation of the v3 phy found on sdm845
called v3-660 (possibly first occurrence in the sdm660).
There are a few similar registers with the v3 phy, but overall they are
different, so I haven't tried reusing the same constants where possible,
as it would make the tables harder to read and maintain.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 124 ++++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 153 ++++++++++++++++++++++++++++
2 files changed, 277 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 2195f8ac393b..2b012bcff622 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -234,6 +234,11 @@ static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_PCS_READY_STATUS] = 0x160,
};
+static const unsigned int sm6115_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x168,
+};
+
static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_SW_RESET] = 0x00,
[QPHY_START_CTRL] = 0x44,
@@ -1329,6 +1334,97 @@ static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60),
};
+static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_CMN_CONFIG, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_CORECLK_DIV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_CORECLK_DIV_MODE1, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_DIV_FRAC_START3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE1_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_DIV_FRAC_START1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_DIV_FRAC_START2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_DIV_FRAC_START3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_CP_CTRL_MODE1, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE1_MODE1, 0xd6),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_LOCK_CMP2_MODE1, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_LOCK_CMP3_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE_INITVAL1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE_INITVAL2, 0x00),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_SIGDET_CNTRL, 0x0F),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_SIGDET_DEGLITCH_CNTRL, 0x1E),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_RX_TERM_BW, 0x5B),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_RX_EQ_GAIN1_LSB, 0xFF),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_RX_EQ_GAIN1_MSB, 0x3F),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_RX_EQ_GAIN2_LSB, 0xFF),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_RX_EQ_GAIN2_MSB, 0x3F),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0D),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_660_RX_UCDR_SO_SATURATION_ENABLE, 0x5B),
+};
+
+static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_RX_PWM_GEAR_BAND, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_RX_SIGDET_CTRL2, 0x6d),
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_TX_LARGE_AMP_DRV_LVL, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_TX_SMALL_AMP_DRV_LVL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_RX_MIN_STALL_NOCONFIG_TIME_CAP, 0x28),
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_RX_SYM_RESYNC_CTRL, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_TX_LARGE_AMP_POST_EMP_LVL, 0x12),
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_TX_SMALL_AMP_POST_EMP_LVL, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V3_660_PCS_RX_MIN_HIBERN8_TIME, 0x9a), /* 8 us */
+};
+
static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
@@ -3396,6 +3492,31 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
.no_pcs_sw_reset = true,
};
+static const struct qmp_phy_cfg sm6115_ufsphy_cfg = {
+ .type = PHY_TYPE_UFS,
+ .nlanes = 1,
+
+ .serdes_tbl = sm6115_ufsphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm6115_ufsphy_serdes_tbl),
+ .tx_tbl = sm6115_ufsphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_tx_tbl),
+ .rx_tbl = sm6115_ufsphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_rx_tbl),
+ .pcs_tbl = sm6115_ufsphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm6115_ufsphy_pcs_tbl),
+ .clk_list = sdm845_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = sm6115_ufsphy_regs_layout,
+
+ .start_ctrl = SERDES_START,
+ .pwrdn_ctrl = SW_PWRDN,
+
+ .is_dual_lane_phy = false,
+ .no_pcs_sw_reset = true,
+};
+
static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
.type = PHY_TYPE_PCIE,
.nlanes = 1,
@@ -5395,6 +5516,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
}, {
.compatible = "qcom,msm8998-qmp-usb3-phy",
.data = &msm8998_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm6115-qmp-ufs-phy",
+ .data = &sm6115_ufsphy_cfg,
}, {
.compatible = "qcom,sm8150-qmp-ufs-phy",
.data = &sm8150_ufsphy_cfg,
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 6592b58b13f6..fffdd532bac4 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -280,6 +280,8 @@
#define QSERDES_V3_COM_SSC_PER2 0x020
#define QSERDES_V3_COM_SSC_STEP_SIZE1 0x024
#define QSERDES_V3_COM_SSC_STEP_SIZE2 0x028
+#define QSERDES_V3_COM_POST_DIV 0x02c
+#define QSERDES_V3_COM_POST_DIV_MUX 0x030
#define QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN 0x034
# define QSERDES_V3_COM_BIAS_EN 0x0001
# define QSERDES_V3_COM_BIAS_EN_MUX 0x0002
@@ -291,6 +293,7 @@
#define QSERDES_V3_COM_CLK_ENABLE1 0x038
#define QSERDES_V3_COM_SYS_CLK_CTRL 0x03c
#define QSERDES_V3_COM_SYSCLK_BUF_ENABLE 0x040
+#define QSERDES_V3_COM_PLL_EN 0x044
#define QSERDES_V3_COM_PLL_IVCO 0x048
#define QSERDES_V3_COM_LOCK_CMP1_MODE0 0x098
#define QSERDES_V3_COM_LOCK_CMP2_MODE0 0x09c
@@ -348,6 +351,119 @@
#define QSERDES_V3_COM_DEBUG_BUS_SEL 0x178
#define QSERDES_V3_COM_CMN_MODE 0x184
+/* Only for QMP V3 660 PHY - QSERDES COM registers*/
+#define QSERDES_V3_660_COM_ATB_SEL1 0x000
+#define QSERDES_V3_660_COM_ATB_SEL2 0x004
+#define QSERDES_V3_660_COM_FREQ_UPDATE 0x008
+#define QSERDES_V3_660_COM_BG_TIMER 0x00c
+#define QSERDES_V3_660_COM_SSC_EN_CENTER 0x010
+#define QSERDES_V3_660_COM_SSC_ADJ_PER1 0x014
+#define QSERDES_V3_660_COM_SSC_ADJ_PER2 0x018
+#define QSERDES_V3_660_COM_SSC_PER1 0x01c
+#define QSERDES_V3_660_COM_SSC_PER2 0x020
+#define QSERDES_V3_660_COM_SSC_STEP_SIZE1 0x024
+#define QSERDES_V3_660_COM_SSC_STEP_SIZE2 0x028
+#define QSERDES_V3_660_COM_POST_DIV 0x02c
+#define QSERDES_V3_660_COM_POST_DIV_MUX 0x030
+#define QSERDES_V3_660_COM_BIAS_EN_CLKBUFLR_EN 0x034
+#define QSERDES_V3_660_COM_CLK_ENABLE1 0x038
+#define QSERDES_V3_660_COM_SYS_CLK_CTRL 0x03c
+#define QSERDES_V3_660_COM_SYSCLK_BUF_ENABLE 0x040
+#define QSERDES_V3_660_COM_PLL_EN 0x044
+#define QSERDES_V3_660_COM_PLL_IVCO 0x048
+#define QSERDES_V3_660_COM_LOCK_CMP1_MODE0 0x04c
+#define QSERDES_V3_660_COM_LOCK_CMP2_MODE0 0x050
+#define QSERDES_V3_660_COM_LOCK_CMP3_MODE0 0x054
+#define QSERDES_V3_660_COM_LOCK_CMP1_MODE1 0x058
+#define QSERDES_V3_660_COM_LOCK_CMP2_MODE1 0x05c
+#define QSERDES_V3_660_COM_LOCK_CMP3_MODE1 0x060
+#define QSERDES_V3_660_COM_CMD_RSVD0 0x064
+#define QSERDES_V3_660_COM_EP_CLOCK_DETECT_CTRL 0x068
+#define QSERDES_V3_660_COM_SYSCLK_DET_COMP_STATUS 0x06c
+#define QSERDES_V3_660_COM_BG_TRIM 0x070
+#define QSERDES_V3_660_COM_CLK_EP_DIV 0x074
+#define QSERDES_V3_660_COM_CP_CTRL_MODE0 0x078
+#define QSERDES_V3_660_COM_CP_CTRL_MODE1 0x07c
+#define QSERDES_V3_660_COM_CMN_RSVD1 0x080
+#define QSERDES_V3_660_COM_PLL_RCTRL_MODE0 0x084
+#define QSERDES_V3_660_COM_PLL_RCTRL_MODE1 0x088
+#define QSERDES_V3_660_COM_CMN_RSVD2 0x08c
+#define QSERDES_V3_660_COM_PLL_CCTRL_MODE0 0x090
+#define QSERDES_V3_660_COM_PLL_CCTRL_MODE1 0x094
+#define QSERDES_V3_660_COM_CMN_RSVD3 0x098
+#define QSERDES_V3_660_COM_PLL_CNTRL 0x09c
+#define QSERDES_V3_660_COM_PHASE_SEL_CTRL 0x0a0
+#define QSERDES_V3_660_COM_PHASE_SEL_DC 0x0a4
+#define QSERDES_V3_660_COM_BIAS_EN_CTRL_BY_PSM 0x0a8
+#define QSERDES_V3_660_COM_SYSCLK_EN_SEL 0x0ac
+#define QSERDES_V3_660_COM_CML_SYSCLK_SEL 0x0b0
+#define QSERDES_V3_660_COM_RESETSM_CNTRL 0x0b4
+#define QSERDES_V3_660_COM_RESETSM_CNTRL2 0x0b8
+#define QSERDES_V3_660_COM_RESTRIM_CTRL 0x0bc
+#define QSERDES_V3_660_COM_RESTRIM_CTRL2 0x0c0
+#define QSERDES_V3_660_COM_LOCK_CMP_EN 0x0c8
+#define QSERDES_V3_660_COM_LOCK_CMP_CFG 0x0cc
+#define QSERDES_V3_660_COM_DEC_START_MODE0 0x0d0
+#define QSERDES_V3_660_COM_DEC_START_MODE1 0x0d4
+#define QSERDES_V3_660_COM_VCOCAL_DEADMAN_CTRL 0x0d8
+#define QSERDES_V3_660_COM_DIV_FRAC_START1_MODE0 0x0dc
+#define QSERDES_V3_660_COM_DIV_FRAC_START2_MODE0 0x0e0
+#define QSERDES_V3_660_COM_DIV_FRAC_START3_MODE0 0x0e4
+#define QSERDES_V3_660_COM_DIV_FRAC_START1_MODE1 0x0e8
+#define QSERDES_V3_660_COM_DIV_FRAC_START2_MODE1 0x0ec
+#define QSERDES_V3_660_COM_DIV_FRAC_START3_MODE1 0x0f0
+#define QSERDES_V3_660_COM_VCO_TUNE_MINVAL1 0x0f4
+#define QSERDES_V3_660_COM_VCO_TUNE_MINVAL2 0x0f8
+#define QSERDES_V3_660_COM_CMN_RSVD4 0x0fc
+#define QSERDES_V3_660_COM_INTEGLOOP_INITVAL 0x100
+#define QSERDES_V3_660_COM_INTEGLOOP_EN 0x104
+#define QSERDES_V3_660_COM_INTEGLOOP_GAIN0_MODE0 0x108
+#define QSERDES_V3_660_COM_INTEGLOOP_GAIN1_MODE0 0x10c
+#define QSERDES_V3_660_COM_INTEGLOOP_GAIN0_MODE1 0x110
+#define QSERDES_V3_660_COM_INTEGLOOP_GAIN1_MODE1 0x114
+#define QSERDES_V3_660_COM_VCO_TUNE_MAXVAL1 0x118
+#define QSERDES_V3_660_COM_VCO_TUNE_MAXVAL2 0x11c
+#define QSERDES_V3_660_COM_RES_TRIM_CONTROL2 0x120
+#define QSERDES_V3_660_COM_VCO_TUNE_CTRL 0x124
+#define QSERDES_V3_660_COM_VCO_TUNE_MAP 0x128
+#define QSERDES_V3_660_COM_VCO_TUNE1_MODE0 0x12c
+#define QSERDES_V3_660_COM_VCO_TUNE2_MODE0 0x130
+#define QSERDES_V3_660_COM_VCO_TUNE1_MODE1 0x134
+#define QSERDES_V3_660_COM_VCO_TUNE2_MODE1 0x138
+#define QSERDES_V3_660_COM_VCO_TUNE_INITVAL1 0x13c
+#define QSERDES_V3_660_COM_VCO_TUNE_INITVAL2 0x140
+#define QSERDES_V3_660_COM_VCO_TUNE_TIMER1 0x144
+#define QSERDES_V3_660_COM_VCO_TUNE_TIMER2 0x148
+#define QSERDES_V3_660_COM_SAR 0x14c
+#define QSERDES_V3_660_COM_SAR_CLK 0x150
+#define QSERDES_V3_660_COM_SAR_CODE_OUT_STATUS 0x154
+#define QSERDES_V3_660_COM_SAR_CODE_READY_STATUS 0x158
+#define QSERDES_V3_660_COM_CMN_STATUS 0x15c
+#define QSERDES_V3_660_COM_RESET_SM_STATUS 0x160
+#define QSERDES_V3_660_COM_RESTRIM_CODE_STATUS 0x164
+#define QSERDES_V3_660_COM_PLLCAL_CODE1_STATUS 0x168
+#define QSERDES_V3_660_COM_PLLCAL_CODE2_STATUS 0x16c
+#define QSERDES_V3_660_COM_BG_CTRL 0x170
+#define QSERDES_V3_660_COM_CLK_SELECT 0x174
+#define QSERDES_V3_660_COM_HSCLK_SEL 0x178
+#define QSERDES_V3_660_COM_INTEGLOOP_BINCODE_STATUS 0x17c
+#define QSERDES_V3_660_COM_PLL_ANALOG 0x180
+#define QSERDES_V3_660_COM_CORECLK_DIV 0x184
+#define QSERDES_V3_660_COM_SW_RESET 0x188
+#define QSERDES_V3_660_COM_CORE_CLK_EN 0x18c
+#define QSERDES_V3_660_COM_C_READY_STATUS 0x190
+#define QSERDES_V3_660_COM_CMN_CONFIG 0x194
+#define QSERDES_V3_660_COM_CMN_RATE_OVERRIDE 0x198
+#define QSERDES_V3_660_COM_SVS_MODE_CLK_SEL 0x19c
+#define QSERDES_V3_660_COM_DEBUG_BUS0 0x1a0
+#define QSERDES_V3_660_COM_DEBUG_BUS1 0x1a4
+#define QSERDES_V3_660_COM_DEBUG_BUS2 0x1a8
+#define QSERDES_V3_660_COM_DEBUG_BUS3 0x1ac
+#define QSERDES_V3_660_COM_DEBUG_BUS_SEL 0x1b0
+#define QSERDES_V3_660_COM_CMN_MISC1 0x1b4
+#define QSERDES_V3_660_COM_CORECLK_DIV_MODE1 0x1bc
+#define QSERDES_V3_660_COM_CMN_RSVD5 0x1c0
+
/* Only for QMP V3 PHY - TX registers */
#define QSERDES_V3_TX_BIST_MODE_LANENO 0x000
#define QSERDES_V3_TX_CLKBUF_ENABLE 0x008
@@ -380,6 +496,10 @@
#define QSERDES_V3_TX_TX_INTERFACE_MODE 0x0c4
#define QSERDES_V3_TX_VMODE_CTRL1 0x0f0
+/* Only for QMP V3 660 PHY - TX registers */
+#define QSERDES_V3_660_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN 0x068
+#define QSERDES_V3_660_TX_LANE_MODE 0x094
+
/* Only for QMP V3 PHY - RX registers */
#define QSERDES_V3_RX_UCDR_FO_GAIN 0x008
#define QSERDES_V3_RX_UCDR_SO_GAIN_HALF 0x00c
@@ -411,6 +531,24 @@
#define QSERDES_V3_RX_RX_MODE_00 0x164
#define QSERDES_V3_RX_RX_MODE_01 0x168
+/* Only for QMP V3 660 PHY - RX registers */
+#define QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN_HALF 0x030
+#define QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN_QUARTER 0x034
+#define QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN_EIGHTH 0x038
+#define QSERDES_V3_660_RX_UCDR_SVS_SO_GAIN 0x03c
+#define QSERDES_V3_660_RX_UCDR_FASTLOCK_FO_GAIN 0x040
+#define QSERDES_V3_660_RX_UCDR_SO_SATURATION_ENABLE 0x048
+#define QSERDES_V3_660_RX_RX_TERM_BW 0x090
+#define QSERDES_V3_660_RX_RX_EQ_GAIN1_LSB 0x0c4
+#define QSERDES_V3_660_RX_RX_EQ_GAIN1_MSB 0x0c8
+#define QSERDES_V3_660_RX_RX_EQ_GAIN2_LSB 0x0cc
+#define QSERDES_V3_660_RX_RX_EQ_GAIN2_MSB 0x0d0
+#define QSERDES_V3_660_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d8
+#define QSERDES_V3_660_RX_SIGDET_CNTRL 0x114
+#define QSERDES_V3_660_RX_SIGDET_LVL 0x118
+#define QSERDES_V3_660_RX_SIGDET_DEGLITCH_CNTRL 0x11c
+#define QSERDES_V3_660_RX_RX_INTERFACE_MODE 0x12c
+
/* Only for QMP V3 PHY - PCS registers */
#define QPHY_V3_PCS_POWER_DOWN_CONTROL 0x004
#define QPHY_V3_PCS_TXMGN_V0 0x00c
@@ -473,6 +611,21 @@
#define QPHY_V3_PCS_REFGEN_REQ_CONFIG1 0x20c
#define QPHY_V3_PCS_REFGEN_REQ_CONFIG2 0x210
+/* Only for QMP V3 660 PHY - PCS registers */
+#define QPHY_V3_660_PCS_PHY_START 0x000
+#define QPHY_V3_660_PCS_POWER_DOWN_CONTROL 0x004
+#define QPHY_V3_660_PCS_TX_LARGE_AMP_DRV_LVL 0x034
+#define QPHY_V3_660_PCS_TX_LARGE_AMP_POST_EMP_LVL 0x038
+#define QPHY_V3_660_PCS_TX_SMALL_AMP_DRV_LVL 0x03c
+#define QPHY_V3_660_PCS_TX_SMALL_AMP_POST_EMP_LVL 0x040
+#define QPHY_V3_660_PCS_RX_MIN_STALL_NOCONFIG_TIME_CAP 0x0cc
+#define QPHY_V3_660_PCS_LINECFG_DISABLE 0x138
+#define QPHY_V3_660_PCS_RX_SYM_RESYNC_CTRL 0x13c
+#define QPHY_V3_660_PCS_RX_MIN_HIBERN8_TIME 0x140
+#define QPHY_V3_660_PCS_RX_SIGDET_CTRL2 0x148
+#define QPHY_V3_660_PCS_RX_PWM_GEAR_BAND 0x154
+#define QPHY_V3_660_PCS_PCS_READY_STATUS 0x168
+
/* Only for QMP V3 PHY - PCS_MISC registers */
#define QPHY_V3_PCS_MISC_CLAMP_ENABLE 0x0c
#define QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2 0x2c
--
2.32.0
next prev parent reply other threads:[~2021-08-05 9:17 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-05 9:17 [PATCH v1 0/2] Add UFS PHY support for SM6115/4250 Iskren Chernev
2021-08-05 9:17 ` [PATCH v1 1/2] dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings Iskren Chernev
2021-08-13 18:38 ` Rob Herring
2021-08-05 9:17 ` Iskren Chernev [this message]
2021-08-06 12:57 ` [PATCH v1 2/2] phy: qcom-qmp: Add support for SM6115 UFS phy Vinod Koul
2021-08-06 16:09 ` Iskren Chernev
2021-08-09 4:48 ` Vinod Koul
2021-08-09 14:20 ` Iskren Chernev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210805091727.942471-3-iskren.chernev@gmail.com \
--to=iskren.chernev@gmail.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=mgautam@codeaurora.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).