Re: [PATCH v5 2/3] PCI: visconti: Add Toshiba Visconti PCIe host controller driver

[Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>]

Hi,

Thank you for your review.

On Thu, Aug 05, 2021 at 11:59:08AM +0100, Lorenzo Pieralisi wrote:
> On Sat, Jul 24, 2021 at 07:14:20AM +0900, Nobuhiro Iwamatsu wrote:
> > Add support to PCIe RC controller on Toshiba Visconti ARM SoCs. PCIe
> > controller is based of Synopsys DesignWare PCIe core.
> > 
> > This patch does not yet use the clock framework to control the clock.
> > This will be replaced in the future.
> 
> This is not relevant information. I expect the commit log to describe
> the change and the reasons behind the choices.

OK, I will drop this sentence.

> 
> Speaking of which, I'd like to understand what
> 
> > This patch does not yet use the clock framework to control the clock.
> 
> means and why it can't be done within this series.

Visconti5 has a clock control IP, but the driver for this is still under
development and has not been applied into mainline. Instead, the clock
for this driver is running using DT's fixed-clock. This will be
replaced by a clock driver.

> 
> > Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
> > Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> > 
> > ---
> >  drivers/pci/controller/dwc/Kconfig         |   9 +
> >  drivers/pci/controller/dwc/Makefile        |   1 +
> >  drivers/pci/controller/dwc/pcie-visconti.c | 333 +++++++++++++++++++++
> >  3 files changed, 343 insertions(+)
> >  create mode 100644 drivers/pci/controller/dwc/pcie-visconti.c
> > 

<snip>

> > +
> > +static int
> > +visconti_add_pcie_port(struct visconti_pcie *pcie, struct platform_device *pdev)
> 
> Nit: don't split lines like this, it is better to keep return value
> type and function name in one single line.
> 
> Do it like this:
> 
> static int visconti_add_pcie_port(struct visconti_pcie *pcie,
>  				  struct platform_device *pdev)
> 

OK, I will fix in v6.

> Lorenzo
> 


Best regards,
  Nobuhiro