From: Lucas De Marchi <lucas.demarchi@intel.com>
To: Gayatri Kammela <gayatri.kammela@intel.com>
Cc: platform-driver-x86@vger.kernel.org, mgross@linux.intel.com,
hdegoede@redhat.com, irenic.rajneesh@gmail.com,
andriy.shevchenko@linux.intel.com, vicamo.yang@canonical.com,
srinivas.pandruvada@intel.com, david.e.box@intel.com,
linux-kernel@vger.kernel.org, tamar.mashiah@intel.com,
gregkh@linuxfoundation.org, rajatja@google.com,
Shyam-sundar.S-k@amd.com, Alexander.Deucher@amd.com,
mlimonci@amd.com, Andy Shevchenko <andy.shevchenko@gmail.com>
Subject: Re: [PATCH v5 1/5] platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc subfolder
Date: Mon, 16 Aug 2021 10:37:38 -0700 [thread overview]
Message-ID: <20210816173738.oxndqtq6uaql7sz7@ldmartin-desk2> (raw)
In-Reply-To: <b2cb6b10b75445acceab3030c3a9aa585e7c7b65.1626459866.git.gayatri.kammela@intel.com>
On Fri, Jul 16, 2021 at 11:38:33AM -0700, Gayatri Kammela wrote:
>As part of collecting Intel x86 specific drivers in their own
>folder, move intel_pmc_core* files to its own subfolder there.
>
>Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
>Cc: David Box <david.e.box@intel.com>
>Cc: You-Sheng Yang <vicamo.yang@canonical.com>
>Cc: Hans de Goede <hdegoede@redhat.com>
>Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
>Acked-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
>Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
>Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
>---
> MAINTAINERS | 2 +-
> drivers/platform/x86/Kconfig | 21 ------------------
> drivers/platform/x86/Makefile | 1 -
> drivers/platform/x86/intel/Kconfig | 1 +
> drivers/platform/x86/intel/Makefile | 1 +
> drivers/platform/x86/intel/pmc/Kconfig | 22 +++++++++++++++++++
> drivers/platform/x86/intel/pmc/Makefile | 5 +++++
> .../{intel_pmc_core.c => intel/pmc/core.c} | 2 +-
> .../{intel_pmc_core.h => intel/pmc/core.h} | 0
> .../pmc/pltdrv.c} | 0
> 10 files changed, 31 insertions(+), 24 deletions(-)
> create mode 100644 drivers/platform/x86/intel/pmc/Kconfig
> create mode 100644 drivers/platform/x86/intel/pmc/Makefile
> rename drivers/platform/x86/{intel_pmc_core.c => intel/pmc/core.c} (99%)
> rename drivers/platform/x86/{intel_pmc_core.h => intel/pmc/core.h} (100%)
> rename drivers/platform/x86/{intel_pmc_core_pltdrv.c => intel/pmc/pltdrv.c} (100%)
>
>diff --git a/MAINTAINERS b/MAINTAINERS
>index 6c8be735cc91..c5d610885bf2 100644
>--- a/MAINTAINERS
>+++ b/MAINTAINERS
>@@ -9477,7 +9477,7 @@ M: David E Box <david.e.box@intel.com>
> L: platform-driver-x86@vger.kernel.org
> S: Maintained
> F: Documentation/ABI/testing/sysfs-platform-intel-pmc
>-F: drivers/platform/x86/intel_pmc_core*
>+F: drivers/platform/x86/intel/pmc/core*
>
> INTEL PMIC GPIO DRIVERS
> M: Andy Shevchenko <andy@kernel.org>
>diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
>index 7d385c3b2239..cae72922f448 100644
>--- a/drivers/platform/x86/Kconfig
>+++ b/drivers/platform/x86/Kconfig
>@@ -1184,27 +1184,6 @@ config INTEL_MRFLD_PWRBTN
> To compile this driver as a module, choose M here: the module
> will be called intel_mrfld_pwrbtn.
>
>-config INTEL_PMC_CORE
>- tristate "Intel PMC Core driver"
>- depends on PCI
>- depends on ACPI
>- help
>- The Intel Platform Controller Hub for Intel Core SoCs provides access
>- to Power Management Controller registers via various interfaces. This
>- driver can utilize debugging capabilities and supported features as
>- exposed by the Power Management Controller. It also may perform some
>- tasks in the PMC in order to enable transition into the SLPS0 state.
>- It should be selected on all Intel platforms supported by the driver.
>-
>- Supported features:
>- - SLP_S0_RESIDENCY counter
>- - PCH IP Power Gating status
>- - LTR Ignore / LTR Show
>- - MPHY/PLL gating status (Sunrisepoint PCH only)
>- - SLPS0 Debug registers (Cannonlake/Icelake PCH)
>- - Low Power Mode registers (Tigerlake and beyond)
>- - PMC quirks as needed to enable SLPS0/S0ix
>-
> config INTEL_PMT_CLASS
> tristate
> help
>diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
>index 7ee369aab10d..43d36f8c36f1 100644
>--- a/drivers/platform/x86/Makefile
>+++ b/drivers/platform/x86/Makefile
>@@ -128,7 +128,6 @@ obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL) += intel-uncore-frequency.o
> obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU) += intel_bxtwc_tmu.o
> obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN) += intel_chtdc_ti_pwrbtn.o
> obj-$(CONFIG_INTEL_MRFLD_PWRBTN) += intel_mrfld_pwrbtn.o
>-obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o intel_pmc_core_pltdrv.o
> obj-$(CONFIG_INTEL_PMT_CLASS) += intel_pmt_class.o
> obj-$(CONFIG_INTEL_PMT_TELEMETRY) += intel_pmt_telemetry.o
> obj-$(CONFIG_INTEL_PMT_CRASHLOG) += intel_pmt_crashlog.o
>diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
>index f2eef337eb98..8ca021785f67 100644
>--- a/drivers/platform/x86/intel/Kconfig
>+++ b/drivers/platform/x86/intel/Kconfig
>@@ -18,5 +18,6 @@ if X86_PLATFORM_DRIVERS_INTEL
>
> source "drivers/platform/x86/intel/int33fe/Kconfig"
> source "drivers/platform/x86/intel/int3472/Kconfig"
>+source "drivers/platform/x86/intel/pmc/Kconfig"
>
> endif # X86_PLATFORM_DRIVERS_INTEL
>diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
>index 0653055942d5..49962f4dfdec 100644
>--- a/drivers/platform/x86/intel/Makefile
>+++ b/drivers/platform/x86/intel/Makefile
>@@ -6,3 +6,4 @@
>
> obj-$(CONFIG_INTEL_CHT_INT33FE) += int33fe/
> obj-$(CONFIG_INTEL_SKL_INT3472) += int3472/
>+obj-$(CONFIG_INTEL_PMC_CORE) += pmc/
>diff --git a/drivers/platform/x86/intel/pmc/Kconfig b/drivers/platform/x86/intel/pmc/Kconfig
>new file mode 100644
>index 000000000000..b4c955a35674
>--- /dev/null
>+++ b/drivers/platform/x86/intel/pmc/Kconfig
>@@ -0,0 +1,22 @@
>+# SPDX-License-Identifier: GPL-2.0-only
>+
>+config INTEL_PMC_CORE
>+ tristate "Intel PMC Core driver"
>+ depends on PCI
>+ depends on ACPI
>+ help
>+ The Intel Platform Controller Hub for Intel Core SoCs provides access
>+ to Power Management Controller registers via various interfaces. This
>+ driver can utilize debugging capabilities and supported features as
>+ exposed by the Power Management Controller. It also may perform some
>+ tasks in the PMC in order to enable transition into the SLPS0 state.
>+ It should be selected on all Intel platforms supported by the driver.
>+
>+ Supported features:
>+ - SLP_S0_RESIDENCY counter
>+ - PCH IP Power Gating status
>+ - LTR Ignore / LTR Show
>+ - MPHY/PLL gating status (Sunrisepoint PCH only)
>+ - SLPS0 Debug registers (Cannonlake/Icelake PCH)
>+ - Low Power Mode registers (Tigerlake and beyond)
>+ - PMC quirks as needed to enable SLPS0/S0ix
>diff --git a/drivers/platform/x86/intel/pmc/Makefile b/drivers/platform/x86/intel/pmc/Makefile
>new file mode 100644
>index 000000000000..e0182e10a035
>--- /dev/null
>+++ b/drivers/platform/x86/intel/pmc/Makefile
>@@ -0,0 +1,5 @@
>+# SPDX-License-Identifier: GPL-2.0
>+#
>+
>+obj-$(CONFIG_INTEL_PMC_CORE) += core.o
>+obj-$(CONFIG_INTEL_PMC_CORE) += pltdrv.o
is the module rename really intentional? If so, it needs to be renamed
to something else as just calling it core may conflict with other
equally badly named modules.
error: the following would cause module name conflict:
GEN .version
drivers/misc/c2port/core.ko
drivers/platform/x86/intel/pmc/core.ko
make[2]: *** [Makefile:1417: modules_check] Error 1
make[2]: *** Waiting for unfinished jobs....
This builds for me by restoring the previous module names
-----8<------
diff --git a/drivers/platform/x86/intel/pmc/Makefile b/drivers/platform/x86/intel/pmc/Makefile
index e0182e10a035..9bfe8ab8fd64 100644
--- a/drivers/platform/x86/intel/pmc/Makefile
+++ b/drivers/platform/x86/intel/pmc/Makefile
@@ -1,5 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
#
-obj-$(CONFIG_INTEL_PMC_CORE) += core.o
-obj-$(CONFIG_INTEL_PMC_CORE) += pltdrv.o
+obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o
+obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core_pltdrv.o
+
+intel_pmc_core-y += core.o
+intel_pmc_core_pltdrv-y += pltdrv.o
-----8<------
Lucas De Marchi
>diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel/pmc/core.c
>similarity index 99%
>rename from drivers/platform/x86/intel_pmc_core.c
>rename to drivers/platform/x86/intel/pmc/core.c
>index b0e486a6bdfb..f9de78b08e5d 100644
>--- a/drivers/platform/x86/intel_pmc_core.c
>+++ b/drivers/platform/x86/intel/pmc/core.c
>@@ -31,7 +31,7 @@
> #include <asm/msr.h>
> #include <asm/tsc.h>
>
>-#include "intel_pmc_core.h"
>+#include "core.h"
>
> #define ACPI_S0IX_DSM_UUID "57a6512e-3979-4e9d-9708-ff13b2508972"
> #define ACPI_GET_LOW_MODE_REGISTERS 1
>diff --git a/drivers/platform/x86/intel_pmc_core.h b/drivers/platform/x86/intel/pmc/core.h
>similarity index 100%
>rename from drivers/platform/x86/intel_pmc_core.h
>rename to drivers/platform/x86/intel/pmc/core.h
>diff --git a/drivers/platform/x86/intel_pmc_core_pltdrv.c b/drivers/platform/x86/intel/pmc/pltdrv.c
>similarity index 100%
>rename from drivers/platform/x86/intel_pmc_core_pltdrv.c
>rename to drivers/platform/x86/intel/pmc/pltdrv.c
>--
>2.25.1
>
next prev parent reply other threads:[~2021-08-16 17:37 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-16 18:38 [PATCH v5 0/5] Add Alder Lake PCH-S support to PMC core driver Gayatri Kammela
2021-07-16 18:38 ` [PATCH v5 1/5] platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc subfolder Gayatri Kammela
2021-08-16 17:37 ` Lucas De Marchi [this message]
2021-08-16 19:23 ` Kammela, Gayatri
2021-08-16 20:32 ` Lucas De Marchi
2021-07-16 18:38 ` [PATCH v5 2/5] platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver Gayatri Kammela
2021-07-16 18:38 ` [PATCH v5 3/5] platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR) support to Alder Lake Gayatri Kammela
2021-07-16 18:38 ` [PATCH v5 4/5] platform/x86/intel: pmc/core: Add Alder Lake low power mode support for pmc core Gayatri Kammela
2021-07-16 18:38 ` [PATCH v5 5/5] platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake PCH Gayatri Kammela
2021-07-17 15:32 ` [PATCH v5 0/5] Add Alder Lake PCH-S support to PMC core driver Hans de Goede
2021-07-19 16:49 ` Kammela, Gayatri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210816173738.oxndqtq6uaql7sz7@ldmartin-desk2 \
--to=lucas.demarchi@intel.com \
--cc=Alexander.Deucher@amd.com \
--cc=Shyam-sundar.S-k@amd.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=andy.shevchenko@gmail.com \
--cc=david.e.box@intel.com \
--cc=gayatri.kammela@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=irenic.rajneesh@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mgross@linux.intel.com \
--cc=mlimonci@amd.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rajatja@google.com \
--cc=srinivas.pandruvada@intel.com \
--cc=tamar.mashiah@intel.com \
--cc=vicamo.yang@canonical.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).