Salut Alex,

On Tue, Aug 17, 2021 at 10:13:11AM +0200, Alexandre Belloni wrote:
> On 17/08/2021 09:38:10+0200, Maxime Ripard wrote:
> > > > It's not entirely clear to me what those clocks are about though. If we
> > > > look at the clock output in the user manual, it looks like there's only
> > > > two clocks that are actually being output: the 32k "fanout" clock and
> > > > the losc. What are the 3 you're talking about?]
> > > 
> > > I see three: the raw SYSTEM "CLK32K_LOSC", the RTC input + debounce
> > > clock (/32), and the multiplexed PAD.
> > 
> > But the input and debounce clock is only for the RTC itself right? So it
> > should be local to the driver and doesn't need to be made available to
> > the other drivers
> > 
> 
> Shouldn't they be exposed to be able to use assigned-clock?

I'm not sure we would even need that? If it's an internal clock to the
RTC, then we probably won't ever need to change it from the device tree?

Maxime