From: James Morse <james.morse@arm.com>
To: x86@kernel.org, linux-kernel@vger.kernel.org
Cc: Fenghua Yu <fenghua.yu@intel.com>,
Reinette Chatre <reinette.chatre@intel.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
H Peter Anvin <hpa@zytor.com>, Babu Moger <Babu.Moger@amd.com>,
James Morse <james.morse@arm.com>,
shameerali.kolothum.thodi@huawei.com,
Jamie Iles <jamie@nuviainc.com>,
D Scott Phillips OS <scott@os.amperecomputing.com>,
lcherian@marvell.com, bobo.shaobowang@huawei.com,
tan.shaopeng@fujitsu.com
Subject: [PATCH v2 20/23] x86/resctrl: Move get_corrected_mbm_count() into resctrl_arch_rmid_read()
Date: Fri, 1 Oct 2021 16:02:59 +0000 [thread overview]
Message-ID: <20211001160302.31189-21-james.morse@arm.com> (raw)
In-Reply-To: <20211001160302.31189-1-james.morse@arm.com>
resctrl_arch_rmid_read() is intended as the function that an
architecture agnostic resctrl filesystem driver can use to
read a value in bytes from a counter. Currently the function returns
the mbm values in chunks directly from hardware. When reading a bandwidth
counter, get_corrected_mbm_count() must be used to correct the
value read.
get_corrected_mbm_count() is architecture specific, this work should be
done in resctrl_arch_rmid_read().
Move the function calls. This allows the resctrl filesystems's chunks
value to be removed in favour of the architecture private version.
Signed-off-by: James Morse <james.morse@arm.com>
---
arch/x86/kernel/cpu/resctrl/internal.h | 4 ++--
arch/x86/kernel/cpu/resctrl/monitor.c | 8 ++++----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 2d0a6bba4a01..65b472d6b146 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -279,14 +279,12 @@ struct rftype {
/**
* struct mbm_state - status for each MBM counter in each domain
- * @chunks: Total data moved (multiply by rdt_group.mon_scale to get bytes)
* @prev_bw_chunks: Previous chunks value read when for bandwidth calculation
* @prev_bw: The most recent bandwidth in MBps
* @delta_bw: Difference between the current and previous bandwidth
* @delta_comp: Indicates whether to compute the delta_bw
*/
struct mbm_state {
- u64 chunks;
u64 prev_bw_chunks;
u32 prev_bw;
u32 delta_bw;
@@ -296,9 +294,11 @@ struct mbm_state {
/**
* struct arch_mbm_state - values used to compute resctrl_arch_rmid_read()s
* return value.
+ * @chunks: Total data moved (multiply by rdt_group.mon_scale to get bytes)
* @prev_msr Value of IA32_QM_CTR for this RMID last time we read it
*/
struct arch_mbm_state {
+ u64 chunks;
u64 prev_msr;
};
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index 4e8bb86ce4a5..eb2502645433 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -204,7 +204,9 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
am = get_arch_mbm_state(hw_dom, rmid, eventid);
if (am) {
- *val = mbm_overflow_count(am->prev_msr, msr_val, hw_res->mbm_width);
+ am->chunks += mbm_overflow_count(am->prev_msr, msr_val,
+ hw_res->mbm_width);
+ *val = get_corrected_mbm_count(rmid, am->chunks);
am->prev_msr = msr_val;
} else {
*val = msr_val;
@@ -374,9 +376,7 @@ static u64 __mon_event_count(u32 rmid, struct rmid_read *rr)
return 0;
}
- m->chunks += tval;
-
- rr->val += get_corrected_mbm_count(rmid, m->chunks);
+ rr->val += tval;
return 0;
}
--
2.30.2
next prev parent reply other threads:[~2021-10-01 16:04 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-01 16:02 [PATCH v2 00/23] x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes James Morse
2021-10-01 16:02 ` [PATCH v2 01/23] x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails James Morse
2021-10-01 16:02 ` [PATCH v2 02/23] x86/resctrl: Fix kfree() of the wrong type in domain_add_cpu() James Morse
2021-10-01 16:02 ` [PATCH v2 03/23] x86/resctrl: Kill off alloc_enabled James Morse
2021-10-15 22:19 ` Reinette Chatre
2021-10-01 16:02 ` [PATCH v2 04/23] x86/resctrl: Merge mon_capable and mon_enabled James Morse
2021-10-19 23:18 ` Babu Moger
2021-10-22 18:30 ` James Morse
2021-10-01 16:02 ` [PATCH v2 05/23] x86/resctrl: Add domain online callback for resctrl work James Morse
2021-10-15 22:19 ` Reinette Chatre
2021-10-22 18:30 ` James Morse
2021-10-19 23:19 ` Babu Moger
2021-10-22 18:30 ` James Morse
2021-10-01 16:02 ` [PATCH v2 06/23] x86/resctrl: Group struct rdt_hw_domain cleanup James Morse
2021-10-01 16:02 ` [PATCH v2 07/23] x86/resctrl: Add domain offline callback for resctrl work James Morse
2021-10-19 23:19 ` Babu Moger
2021-10-22 18:30 ` James Morse
2021-10-01 16:02 ` [PATCH v2 08/23] x86/resctrl: Create mba_sc configuration in the rdt_domain James Morse
2021-10-15 22:26 ` Reinette Chatre
2021-10-22 18:30 ` James Morse
2021-10-01 16:02 ` [PATCH v2 09/23] x86/resctrl: Switch over to the resctrl mbps_val list James Morse
2021-10-15 22:26 ` Reinette Chatre
2021-10-27 16:49 ` James Morse
2021-10-01 16:02 ` [PATCH v2 10/23] x86/resctrl: Remove architecture copy of mbps_val James Morse
2021-10-15 22:27 ` Reinette Chatre
2021-10-27 16:49 ` James Morse
2021-10-01 16:02 ` [PATCH v2 11/23] x86/resctrl: Remove set_mba_sc()s control array re-initialisation James Morse
2021-10-01 16:02 ` [PATCH v2 12/23] x86/resctrl: Abstract and use supports_mba_mbps() James Morse
2021-10-07 6:13 ` tan.shaopeng
2021-10-27 16:50 ` James Morse
2021-10-15 22:28 ` Reinette Chatre
2021-10-01 16:02 ` [PATCH v2 13/23] x86/resctrl: Allow update_mba_bw() to update controls directly James Morse
2021-10-15 22:28 ` Reinette Chatre
2021-10-27 16:49 ` James Morse
2021-10-01 16:02 ` [PATCH v2 14/23] x86/resctrl: Calculate bandwidth from the previous __mon_event_count() chunks James Morse
2021-10-15 22:28 ` Reinette Chatre
2021-10-27 16:50 ` James Morse
2021-10-27 20:41 ` Reinette Chatre
2021-10-29 15:50 ` James Morse
2021-10-29 22:22 ` Reinette Chatre
2021-10-01 16:02 ` [PATCH v2 15/23] x86/recstrl: Add per-rmid arch private storage for overflow and chunks James Morse
2021-10-15 22:29 ` Reinette Chatre
2021-10-01 16:02 ` [PATCH v2 16/23] x86/recstrl: Allow per-rmid arch private storage to be reset James Morse
2021-10-07 6:16 ` tan.shaopeng
2021-10-01 16:02 ` [PATCH v2 17/23] x86/resctrl: Abstract __rmid_read() James Morse
2021-10-15 22:29 ` Reinette Chatre
2021-10-19 23:20 ` Babu Moger
2021-10-20 18:15 ` Reinette Chatre
2021-10-20 19:22 ` Babu Moger
2021-10-20 20:28 ` Reinette Chatre
2021-10-27 16:50 ` James Morse
2021-10-27 18:59 ` Babu Moger
2021-10-01 16:02 ` [PATCH v2 18/23] x86/resctrl: Pass the required parameters into resctrl_arch_rmid_read() James Morse
2021-10-15 22:30 ` Reinette Chatre
2021-10-01 16:02 ` [PATCH v2 19/23] x86/resctrl: Move mbm_overflow_count() " James Morse
2021-10-01 16:02 ` James Morse [this message]
2021-10-01 16:03 ` [PATCH v2 21/23] x86/resctrl: Rename and change the units of resctrl_cqm_threshold James Morse
2021-10-01 16:03 ` [PATCH v2 22/23] x86/resctrl: Add resctrl_rmid_realloc_limit to abstract x86's boot_cpu_data James Morse
2021-10-01 16:03 ` [PATCH v2 23/23] x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes James Morse
2021-10-13 2:09 ` [PATCH v2 00/23] " tan.shaopeng
2021-10-19 23:17 ` Babu Moger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211001160302.31189-21-james.morse@arm.com \
--to=james.morse@arm.com \
--cc=Babu.Moger@amd.com \
--cc=bobo.shaobowang@huawei.com \
--cc=bp@alien8.de \
--cc=fenghua.yu@intel.com \
--cc=hpa@zytor.com \
--cc=jamie@nuviainc.com \
--cc=lcherian@marvell.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=reinette.chatre@intel.com \
--cc=scott@os.amperecomputing.com \
--cc=shameerali.kolothum.thodi@huawei.com \
--cc=tan.shaopeng@fujitsu.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).