From: Flora Fu <flora.fu@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Mark Brown <broonie@kernel.org>,
Sumit Semwal <sumit.semwal@linaro.org>
Cc: <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-media@vger.kernel.org>, <dri-devel@lists.freedesktop.org>,
<linaro-mm-sig@lists.linaro.org>,
Flora Fu <flora.fu@mediatek.com>, Yong Wu <yong.wu@mediatek.com>,
Pi-Cheng Chen <pi-cheng.chen@mediatek.com>
Subject: [RFC 03/13] dt-bindings: soc: mediatek: apusys: Add new document for APU tinysys
Date: Sat, 23 Oct 2021 19:13:59 +0800 [thread overview]
Message-ID: <20211023111409.30463-4-flora.fu@mediatek.com> (raw)
In-Reply-To: <20211023111409.30463-1-flora.fu@mediatek.com>
Add new document for APU tinysys.
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
.../soc/mediatek/mediatek,apu-rv.yaml | 140 ++++++++++++++++++
1 file changed, 140 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,apu-rv.yaml
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,apu-rv.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,apu-rv.yaml
new file mode 100644
index 000000000000..ee0ff5d656e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,apu-rv.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# # Copyright 2021 MediaTek Inc.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/mediatek/mediatek,apu-rv.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Mediatek APU Power
+
+description: |
+ APU integrated subsystem having MD32RV33 (MD32) that runs tinysys
+ The tinsys is running on a micro processor in APU.
+ Its firmware is load and boot from Kernel side. Kernel and tinysys use
+ IPI to tx/rx messages.
+
+maintainers:
+ - Flora Fu <flora.fu@mediatek.com>
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt8192-apusys-rv
+
+ reg:
+ minItems: 1
+
+ reg-names:
+ minItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ iommus:
+ maxItems: 1
+
+ interrupts:
+ description: List of interrupts.
+
+ interrupt-names:
+ description: Name list of interrupts.
+
+ mediatek,apusys-power:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ phandle to the device containing the apusys-power handle.
+
+ apu_ctrl:
+ description: handle the ipi state, time sync and deep idle message.
+ type: object
+
+ properties:
+ compatible:
+ const: "mediatek,apu-ctrl-rpmsg"
+
+ required:
+ - compatible
+
+ additionalProperties: false
+
+ apu_pwr_tx:
+ description: handle the message trigger from AP side to tinysys.
+ type: object
+
+ properties:
+ compatible:
+ const: "mediatek,apupwr-tx-rpmsg"
+
+ required:
+ - compatible
+
+ additionalProperties: false
+
+ apu_pwr_rx:
+ description: handle the message trigger from tinysys to AP side.
+ type: object
+
+ properties:
+ compatible:
+ const: "mediatek,apupwr-rx-rpmsg"
+
+ required:
+ - compatible
+
+ additionalProperties: false
+
+ apu_mdw_rpmsg:
+ description: handle the middleware messages.
+ type: object
+
+ properties:
+ compatible:
+ const: "mediatek,apu-mdw-rpmsg"
+
+ required:
+ - compatible
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - interrupts
+ - mediatek,apusys-power
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8192-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/memory/mt8192-larb-port.h>
+
+ apusys_rv@19001000 {
+ compatible = "mediatek,mt8192-apusys-rv";
+ reg = <0x19000000 0x1000>,
+ <0x19001000 0x1000>;
+ reg-names = "apu_mbox",
+ "md32_sysctrl";
+ mediatek,apusys-power = <&apusys_power>;
+ power-domains = <&apuspm 0>;
+ iommus = <&iommu_apu IOMMU_PORT_APU_DATA>;
+ interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "apu_wdt",
+ "mbox0_irq";
+ apu_ctrl {
+ compatible = "mediatek,apu-ctrl-rpmsg";
+ };
+ apu_pwr_tx {
+ compatible = "mediatek,apupwr-tx-rpmsg";
+ };
+ apu_pwr_rx {
+ compatible = "mediatek,apupwr-rx-rpmsg";
+ };
+ apu_mdw_rpmsg {
+ compatible = "mediatek,apu-mdw-rpmsg";
+ };
+ };
--
2.18.0
next prev parent reply other threads:[~2021-10-23 11:15 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-23 11:13 [RFC 00/13] MediaTek MT8192 APU Flora Fu
2021-10-23 11:13 ` [RFC 01/13] dt-bindings: soc: mediatek: apusys: add mt8192 apu iommu bindings Flora Fu
2021-10-23 11:13 ` [RFC 02/13] dt-bindings: soc: mediatek: apusys: Add new document for APU power Flora Fu
2021-10-23 11:13 ` Flora Fu [this message]
2021-10-23 11:14 ` [RFC 04/13] iommu/mediatek: Add APU iommu support Flora Fu
2021-10-26 15:17 ` AngeloGioacchino Del Regno
2021-10-23 11:14 ` [RFC 05/13] soc: mediatek: Add command for APU SMC call Flora Fu
2021-10-23 11:14 ` [RFC 06/13] soc: mediatek: apu: Add apu core driver Flora Fu
2021-10-23 15:49 ` Randy Dunlap
2021-10-26 15:17 ` AngeloGioacchino Del Regno
2021-10-23 11:14 ` [RFC 07/13] soc: mediatek: apu: Add apu power driver Flora Fu
2021-10-23 11:14 ` [RFC 08/13] soc: mediatek: apu: Add apusys rv driver Flora Fu
2021-10-26 15:21 ` AngeloGioacchino Del Regno
[not found] ` <0248142e6e0b55fe12f179e74b77375b386082ee.camel@mediatek.com>
2021-11-26 10:07 ` AngeloGioacchino Del Regno
2021-10-23 11:14 ` [RFC 09/13] soc: mediatek: apu: Add middleware driver Flora Fu
2021-10-23 11:14 ` [RFC 10/13] arm64: dts: mt8192: Add APU-IOMMU nodes Flora Fu
2021-10-23 11:14 ` [RFC 11/13] arm64: dts: mt8192: Add apu power nodes Flora Fu
2021-10-23 11:14 ` [RFC 12/13] arm64: dts: mt8192: Add apu tinysys Flora Fu
2021-10-26 15:18 ` AngeloGioacchino Del Regno
2021-10-23 11:14 ` [RFC 13/13] arm64: dts: mt8192: Add regulator for APU Flora Fu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211023111409.30463-4-flora.fu@mediatek.com \
--to=flora.fu@mediatek.com \
--cc=broonie@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linaro-mm-sig@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=pi-cheng.chen@mediatek.com \
--cc=sumit.semwal@linaro.org \
--cc=yong.wu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).