From: Tero Kristo <tero.kristo@linux.intel.com>
To: linux-input@vger.kernel.org, benjamin.tissoires@redhat.com,
jikos@kernel.org, mika.westerberg@linux.intel.com,
tero.kristo@linux.intel.com
Cc: linux-kernel@vger.kernel.org, dmitry.torokhov@gmail.com,
peter.hutterer@who-t.net
Subject: [RFCv3 5/7] HID: debug: Add USI usages
Date: Wed, 1 Dec 2021 18:42:59 +0200 [thread overview]
Message-ID: <20211201164301.44653-6-tero.kristo@linux.intel.com> (raw)
In-Reply-To: <20211201164301.44653-1-tero.kristo@linux.intel.com>
From: Mika Westerberg <mika.westerberg@linux.intel.com>
Add USI defined usages to the HID debug code.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[tero.kristo: squashed in EV_MSC definitions]
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
---
drivers/hid/hid-debug.c | 40 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 39 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index 7a92e2a04a09..cec0470e5485 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -141,8 +141,10 @@ static const struct hid_usage_entry hid_usage_table[] = {
{0, 0x33, "Touch"},
{0, 0x34, "UnTouch"},
{0, 0x35, "Tap"},
+ {0, 0x38, "Transducer Index"},
{0, 0x39, "TabletFunctionKey"},
{0, 0x3a, "ProgramChangeKey"},
+ {0, 0x3B, "Battery Strength"},
{0, 0x3c, "Invert"},
{0, 0x42, "TipSwitch"},
{0, 0x43, "SecondaryTipSwitch"},
@@ -160,7 +162,40 @@ static const struct hid_usage_entry hid_usage_table[] = {
{0, 0x59, "ButtonType"},
{0, 0x5A, "SecondaryBarrelSwitch"},
{0, 0x5B, "TransducerSerialNumber"},
+ {0, 0x5C, "Preferred Color"},
+ {0, 0x5D, "Preferred Color is Locked"},
+ {0, 0x5E, "Preferred Line Width"},
+ {0, 0x5F, "Preferred Line Width is Locked"},
{0, 0x6e, "TransducerSerialNumber2"},
+ {0, 0x70, "Preferred Line Style"},
+ {0, 0x71, "Preferred Line Style is Locked"},
+ {0, 0x72, "Ink"},
+ {0, 0x73, "Pencil"},
+ {0, 0x74, "Highlighter"},
+ {0, 0x75, "Chisel Marker"},
+ {0, 0x76, "Brush"},
+ {0, 0x77, "No Preference"},
+ {0, 0x80, "Digitizer Diagnostic"},
+ {0, 0x81, "Digitizer Error"},
+ {0, 0x82, "Err Normal Status"},
+ {0, 0x83, "Err Transducers Exceeded"},
+ {0, 0x84, "Err Full Trans Features Unavailable"},
+ {0, 0x85, "Err Charge Low"},
+ {0, 0x90, "Transducer Software Info"},
+ {0, 0x91, "Transducer Vendor Id"},
+ {0, 0x92, "Transducer Product Id"},
+ {0, 0x93, "Device Supported Protocols"},
+ {0, 0x94, "Transducer Supported Protocols"},
+ {0, 0x95, "No Protocol"},
+ {0, 0x96, "Wacom AES Protocol"},
+ {0, 0x97, "USI Protocol"},
+ {0, 0x98, "Microsoft Pen Protocol"},
+ {0, 0xA0, "Supported Report Rates"},
+ {0, 0xA1, "Report Rate"},
+ {0, 0xA2, "Transducer Connected"},
+ {0, 0xA3, "Switch Disabled"},
+ {0, 0xA4, "Switch Unimplemented"},
+ {0, 0xA5, "Transducer Switches"},
{ 15, 0, "PhysicalInterfaceDevice" },
{0, 0x00, "Undefined"},
{0, 0x01, "Physical_Interface_Device"},
@@ -990,7 +1025,10 @@ static const char *absolutes[ABS_CNT] = {
static const char *misc[MSC_MAX + 1] = {
[MSC_SERIAL] = "Serial", [MSC_PULSELED] = "Pulseled",
- [MSC_GESTURE] = "Gesture", [MSC_RAW] = "RawData"
+ [MSC_GESTURE] = "Gesture", [MSC_RAW] = "RawData",
+ [MSC_PEN_ID] = "PenID", [MSC_PEN_COLOR] "PenColor",
+ [MSC_PEN_LINE_WIDTH] = "PenLineWidth",
+ [MSC_PEN_LINE_STYLE] = "PenLineStyle",
};
static const char *leds[LED_MAX + 1] = {
--
2.25.1
next prev parent reply other threads:[~2021-12-01 16:45 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-01 16:42 [RFCv3 0/7] USI stylus support series Tero Kristo
2021-12-01 16:42 ` [RFCv3 1/7] HID: Add map_msc() to avoid boilerplate code Tero Kristo
2021-12-08 15:03 ` Benjamin Tissoires
2021-12-01 16:42 ` [RFCv3 2/7] HID: hid-input: Add suffix also for HID_DG_PEN Tero Kristo
2021-12-08 15:06 ` Benjamin Tissoires
2021-12-01 16:42 ` [RFCv3 3/7] HID: core: Add support for USI style events Tero Kristo
2021-12-08 15:18 ` Benjamin Tissoires
2021-12-08 16:33 ` Benjamin Tissoires
2021-12-10 10:31 ` Tero Kristo
2021-12-01 16:42 ` [RFCv3 4/7] HID: input: Make hidinput_find_field() static Tero Kristo
2021-12-08 15:19 ` Benjamin Tissoires
2021-12-01 16:42 ` Tero Kristo [this message]
2021-12-01 16:43 ` [RFCv3 6/7] samples: hid: add new hid-usi sample Tero Kristo
2021-12-01 16:43 ` [RFCv3 7/7] samples: hid: convert USI sample to use unix socket for comms Tero Kristo
2021-12-08 15:30 ` [RFCv3 0/7] USI stylus support series Benjamin Tissoires
2021-12-09 7:51 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211201164301.44653-6-tero.kristo@linux.intel.com \
--to=tero.kristo@linux.intel.com \
--cc=benjamin.tissoires@redhat.com \
--cc=dmitry.torokhov@gmail.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=peter.hutterer@who-t.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).