linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jagath Jog J <jagathjog1996@gmail.com>
To: gregkh@linuxfoundation.org, fabioaiuto83@gmail.com,
	marcocesati@gmail.com
Cc: linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
	jagathjog1996@gmail.com
Subject: [PATCH  1/4] Staging: rtl8723bs: Placing opening { braces in previous line
Date: Wed, 12 Jan 2022 09:51:58 +0530	[thread overview]
Message-ID: <20220112042201.5056-2-jagathjog1996@gmail.com> (raw)
In-Reply-To: <20220112042201.5056-1-jagathjog1996@gmail.com>

Fix following checkpatch.pl error by placing opening {
braces in previous line
ERROR: that open brace { should be on the previous line

Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com>
---
 .../staging/rtl8723bs/os_dep/ioctl_cfg80211.c | 40 ++++++-------------
 1 file changed, 13 insertions(+), 27 deletions(-)

diff --git a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
index 5157b5b12597..81b548ad4e30 100644
--- a/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
+++ b/drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c
@@ -113,13 +113,10 @@ static struct ieee80211_supported_band *rtw_spt_band_alloc(
 	struct ieee80211_supported_band *spt_band = NULL;
 	int n_channels, n_bitrates;
 
-	if (band == NL80211_BAND_2GHZ)
-	{
+	if (band == NL80211_BAND_2GHZ) {
 		n_channels = RTW_2G_CHANNELS_NUM;
 		n_bitrates = RTW_G_RATES_NUM;
-	}
-	else
-	{
+	} else {
 		goto exit;
 	}
 
@@ -135,8 +132,7 @@ static struct ieee80211_supported_band *rtw_spt_band_alloc(
 	spt_band->n_channels = n_channels;
 	spt_band->n_bitrates = n_bitrates;
 
-	if (band == NL80211_BAND_2GHZ)
-	{
+	if (band == NL80211_BAND_2GHZ) {
 		rtw_2g_channels_init(spt_band->channels);
 		rtw_2g_rates_init(spt_band->bitrates);
 	}
@@ -235,8 +231,7 @@ struct cfg80211_bss *rtw_cfg80211_inform_bss(struct adapter *padapter, struct wl
 	{
 		u16 wapi_len = 0;
 
-		if (rtw_get_wapi_ie(pnetwork->network.ies, pnetwork->network.ie_length, NULL, &wapi_len) > 0)
-		{
+		if (rtw_get_wapi_ie(pnetwork->network.ies, pnetwork->network.ie_length, NULL, &wapi_len) > 0) {
 			if (wapi_len > 0)
 				goto exit;
 		}
@@ -244,8 +239,7 @@ struct cfg80211_bss *rtw_cfg80211_inform_bss(struct adapter *padapter, struct wl
 
 	/* To reduce PBC Overlap rate */
 	/* spin_lock_bh(&pwdev_priv->scan_req_lock); */
-	if (adapter_wdev_data(padapter)->scan_request)
-	{
+	if (adapter_wdev_data(padapter)->scan_request) {
 		u8 *psr = NULL, sr = 0;
 		struct ndis_802_11_ssid *pssid = &pnetwork->network.ssid;
 		struct cfg80211_scan_request *request = adapter_wdev_data(padapter)->scan_request;
@@ -258,14 +252,12 @@ struct cfg80211_bss *rtw_cfg80211_inform_bss(struct adapter *padapter, struct wl
 		if (wpsie && wpsielen > 0)
 			psr = rtw_get_wps_attr_content(wpsie,  wpsielen, WPS_ATTR_SELECTED_REGISTRAR, (u8 *)(&sr), NULL);
 
-		if (sr != 0)
-		{
-			if (request->n_ssids == 1 && request->n_channels == 1) /*  it means under processing WPS */
-			{
+		if (sr != 0) {
+			/*  it means under processing WPS */
+			if (request->n_ssids == 1 && request->n_channels == 1) {
 				if (ssids[0].ssid_len != 0 &&
 				    (pssid->ssid_length != ssids[0].ssid_len ||
-				     memcmp(pssid->ssid, ssids[0].ssid, ssids[0].ssid_len)))
-				{
+				     memcmp(pssid->ssid, ssids[0].ssid, ssids[0].ssid_len))) {
 					if (psr)
 						*psr = 0; /* clear sr */
 				}
@@ -374,8 +366,7 @@ void rtw_cfg80211_ibss_indicate_connect(struct adapter *padapter)
 	int freq = (int)cur_network->network.configuration.ds_config;
 	struct ieee80211_channel *chan;
 
-	if (pwdev->iftype != NL80211_IFTYPE_ADHOC)
-	{
+	if (pwdev->iftype != NL80211_IFTYPE_ADHOC) {
 		return;
 	}
 
@@ -383,14 +374,11 @@ void rtw_cfg80211_ibss_indicate_connect(struct adapter *padapter)
 		struct wlan_bssid_ex  *pnetwork = &(padapter->mlmeextpriv.mlmext_info.network);
 		struct wlan_network *scanned = pmlmepriv->cur_network_scanned;
 
-		if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == true)
-		{
+		if (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) == true) {
 
 			memcpy(&cur_network->network, pnetwork, sizeof(struct wlan_bssid_ex));
 			rtw_cfg80211_inform_bss(padapter, cur_network);
-		}
-		else
-		{
+		} else {
 			if (!scanned) {
 				rtw_warn_on(1);
 				return;
@@ -473,9 +461,7 @@ void rtw_cfg80211_indicate_connect(struct adapter *padapter)
 		roam_info.resp_ie_len =
 			pmlmepriv->assoc_rsp_len-sizeof(struct ieee80211_hdr_3addr)-6;
 		cfg80211_roamed(padapter->pnetdev, &roam_info, GFP_ATOMIC);
-	}
-	else
-	{
+	} else {
 		cfg80211_connect_result(padapter->pnetdev, cur_network->network.mac_address
 			, pmlmepriv->assoc_req+sizeof(struct ieee80211_hdr_3addr)+2
 			, pmlmepriv->assoc_req_len-sizeof(struct ieee80211_hdr_3addr)-2
-- 
2.17.1


  reply	other threads:[~2022-01-12  4:22 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-12  4:21 [PATCH 0/4] Staging: rtl8723bs: Fix codestyle errors and warnings Jagath Jog J
2022-01-12  4:21 ` Jagath Jog J [this message]
2022-01-12  4:21 ` [PATCH 2/4] Staging: rtl8723bs: Interchanging comparison expression operands Jagath Jog J
2022-01-12  4:22 ` [PATCH 3/4] Staging: rtl8723bs: Removed extra spaces between datatype and variable Jagath Jog J
2022-01-12  4:22 ` [PATCH 4/4] Staging: rtl8723bs: Inserting blank line after declaration Jagath Jog J

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220112042201.5056-2-jagathjog1996@gmail.com \
    --to=jagathjog1996@gmail.com \
    --cc=fabioaiuto83@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=marcocesati@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).