linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Jason Wang <jasowang@redhat.com>
Cc: Anirudh Rayabharam <mail@anirudhrb.com>,
	syzbot+0abd373e2e50d704db87@syzkaller.appspotmail.com,
	kvm <kvm@vger.kernel.org>,
	virtualization <virtualization@lists.linux-foundation.org>,
	netdev <netdev@vger.kernel.org>,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] vhost: validate range size before adding to iotlb
Date: Tue, 22 Feb 2022 10:02:29 -0500	[thread overview]
Message-ID: <20220222090511-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <CACGkMEvd7ETC_ANyrOSAVz_i64xqpYYazmm=+39E51=DMRFXdw@mail.gmail.com>

On Tue, Feb 22, 2022 at 03:11:07PM +0800, Jason Wang wrote:
> On Tue, Feb 22, 2022 at 12:57 PM Anirudh Rayabharam <mail@anirudhrb.com> wrote:
> >
> > On Tue, Feb 22, 2022 at 10:50:20AM +0800, Jason Wang wrote:
> > > On Tue, Feb 22, 2022 at 3:53 AM Anirudh Rayabharam <mail@anirudhrb.com> wrote:
> > > >
> > > > In vhost_iotlb_add_range_ctx(), validate the range size is non-zero
> > > > before proceeding with adding it to the iotlb.
> > > >
> > > > Range size can overflow to 0 when start is 0 and last is (2^64 - 1).
> > > > One instance where it can happen is when userspace sends an IOTLB
> > > > message with iova=size=uaddr=0 (vhost_process_iotlb_msg). So, an
> > > > entry with size = 0, start = 0, last = (2^64 - 1) ends up in the
> > > > iotlb. Next time a packet is sent, iotlb_access_ok() loops
> > > > indefinitely due to that erroneous entry:
> > > >
> > > >         Call Trace:
> > > >          <TASK>
> > > >          iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340
> > > >          vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366
> > > >          vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104
> > > >          vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372
> > > >          kthread+0x2e9/0x3a0 kernel/kthread.c:377
> > > >          ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
> > > >          </TASK>
> > > >
> > > > Reported by syzbot at:
> > > >         https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87
> > > >
> > > > Reported-by: syzbot+0abd373e2e50d704db87@syzkaller.appspotmail.com
> > > > Tested-by: syzbot+0abd373e2e50d704db87@syzkaller.appspotmail.com
> > > > Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
> > > > ---
> > > >  drivers/vhost/iotlb.c | 6 ++++--
> > > >  1 file changed, 4 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/vhost/iotlb.c b/drivers/vhost/iotlb.c
> > > > index 670d56c879e5..b9de74bd2f9c 100644
> > > > --- a/drivers/vhost/iotlb.c
> > > > +++ b/drivers/vhost/iotlb.c
> > > > @@ -53,8 +53,10 @@ int vhost_iotlb_add_range_ctx(struct vhost_iotlb *iotlb,
> > > >                               void *opaque)
> > > >  {
> > > >         struct vhost_iotlb_map *map;
> > > > +       u64 size = last - start + 1;
> > > >
> > > > -       if (last < start)
> > > > +       // size can overflow to 0 when start is 0 and last is (2^64 - 1).
> > > > +       if (last < start || size == 0)
> > > >                 return -EFAULT;
> > >
> > > I'd move this check to vhost_chr_iter_write(), then for the device who
> > > has its own msg handler (e.g vDPA) can benefit from it as well.
> >
> > Thanks for reviewing!
> >
> > I kept the check here thinking that all devices would benefit from it
> > because they would need to call vhost_iotlb_add_range() to add an entry
> > to the iotlb. Isn't that correct?
> 
> Correct for now but not for the future, it's not guaranteed that the
> per device iotlb message handler will use vhost iotlb.
> 
> But I agree that we probably don't need to care about it too much now.
> 
> > Do you see any other benefit in moving
> > it to vhost_chr_iter_write()?
> >
> > One concern I have is that if we move it out some future caller to
> > vhost_iotlb_add_range() might forget to handle this case.
> 
> Yes.
> 
> Rethink the whole fix, we're basically rejecting [0, ULONG_MAX] range
> which seems a little bit odd.

Well, I guess ideally we'd split this up as two entries - this kind of
thing is after all one of the reasons we initially used first,last as
the API - as opposed to first,size.

Anirudh, could you do it like this instead of rejecting?


> I wonder if it's better to just remove
> the map->size. Having a quick glance at the the user, I don't see any
> blocker for this.
> 
> Thanks

I think it's possible but won't solve the bug by itself, and we'd need
to review and fix all users - a high chance of introducing
another regression. And I think there's value of fitting under the
stable rule of 100 lines with context.
So sure, but let's fix the bug first.



> >
> > Thanks!
> >
> >         - Anirudh.
> >
> > >
> > > Thanks
> > >
> > > >
> > > >         if (iotlb->limit &&
> > > > @@ -69,7 +71,7 @@ int vhost_iotlb_add_range_ctx(struct vhost_iotlb *iotlb,
> > > >                 return -ENOMEM;
> > > >
> > > >         map->start = start;
> > > > -       map->size = last - start + 1;
> > > > +       map->size = size;
> > > >         map->last = last;
> > > >         map->addr = addr;
> > > >         map->perm = perm;
> > > > --
> > > > 2.35.1
> > > >
> > >
> >


  reply	other threads:[~2022-02-22 15:03 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-21 19:53 [PATCH] vhost: validate range size before adding to iotlb Anirudh Rayabharam
2022-02-22  2:50 ` Jason Wang
2022-02-22  4:57   ` Anirudh Rayabharam
2022-02-22  7:11     ` Jason Wang
2022-02-22 15:02       ` Michael S. Tsirkin [this message]
2022-02-22 17:27         ` Anirudh Rayabharam
2022-02-22 23:21           ` Michael S. Tsirkin
2022-02-23 14:18             ` Anirudh Rayabharam
2022-02-23 15:15               ` Michael S. Tsirkin
2022-02-23 16:49                 ` Anirudh Rayabharam
2022-02-23 17:14                   ` Michael S. Tsirkin
2022-02-23  2:05         ` Jason Wang
2022-02-22 14:04 ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220222090511-mutt-send-email-mst@kernel.org \
    --to=mst@redhat.com \
    --cc=jasowang@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mail@anirudhrb.com \
    --cc=netdev@vger.kernel.org \
    --cc=syzbot+0abd373e2e50d704db87@syzkaller.appspotmail.com \
    --cc=virtualization@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).