From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Tanmay Shah <tanmay.shah@xilinx.com>
Cc: bjorn.andersson@linaro.org, robh+dt@kernel.org,
michal.simek@xilinx.com, laurent.pinchart@ideasonboard.com,
ben.levinsky@xilinx.com, bill.mills@linaro.org,
sergei.korneichuk@xilinx.com, arun.balaji.kannan@xilinx.com,
linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 1/6] dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
Date: Tue, 22 Feb 2022 09:36:13 -0700 [thread overview]
Message-ID: <20220222163613.GA923552@p14s> (raw)
In-Reply-To: <f383cd27-9757-7b56-4ebc-1227b28f51f7@xilinx.com>
On Mon, Feb 21, 2022 at 05:58:15PM -0800, Tanmay Shah wrote:
> Hi Mathieu,
>
> Thanks for reviews.
>
> Please find my comments below.
>
> On 2/14/22 10:22 AM, Mathieu Poirier wrote:
> > On Thu, Feb 10, 2022 at 03:28:19AM -0800, Tanmay Shah wrote:
> > > Xilinx ZynqMP platform has dual-core ARM Cortex R5 Realtime Processing
> > > Unit(RPU) subsystem. This patch adds dt-bindings for RPU subsystem (cluster).
> > >
> > > Signed-off-by: Tanmay Shah<tanmay.shah@xilinx.com>
> > > ---
> > >
> > > Changes in v3:
> > > - None
> > >
> > > .../bindings/remoteproc/xlnx,r5f-rproc.yaml | 139 ++++++++++++++++++
> > > include/dt-bindings/power/xlnx-zynqmp-power.h | 6 +
> > > 2 files changed, 145 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
> > > new file mode 100644
> > > index 000000000000..d43f0b16ad7f
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,r5f-rproc.yaml
> > > @@ -0,0 +1,139 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id:http://devicetree.org/schemas/remoteproc/xlnx,r5f-rproc.yaml#
> > > +$schema:http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Xilinx R5F processor subsystem
> > > +
> > > +maintainers:
> > > + - Ben Levinsky<ben.levinsky@xilinx.com>
> > > + - Tanmay Shah<tanmay.shah@xilinx.com>
> > > +
> > > +description: |
> > > + The Xilinx platforms include a pair of Cortex-R5F processors (RPU) for
> > > + real-time processing based on the Cortex-R5F processor core from ARM.
> > > + The Cortex-R5F processor implements the Arm v7-R architecture and includes a
> > > + floating-point unit that implements the Arm VFPv3 instruction set.
> > > +
> > > +properties:
> > > + compatible:
> > > + const: xlnx,zynqmp-r5fss
> > > +
> > > + xlnx,cluster-mode:
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> > > + description: |
> > > + The RPU MPCore can operate in split mode(Dual-processor performance), Safety
> > > + lock-step mode(Both RPU cores execute the same code in lock-step,
> > > + clock-for-clock) or Single CPU mode (RPU core 0 can be held in reset while
> > > + core 1 runs normally). The processor does not support dynamic configuration.
> > > + Switching between modes is only permitted immediately after a processor reset.
> > > + If set to 1 then lockstep mode and if 0 then split mode.
> > > + If set to 2 then single CPU mode. When not defined, default will be lockstep mode.
> > > +
> > > + "#address-cells":
> > > + const: 1
> > > +
> > > + "#size-cells":
> > > + const: 1
> > > +
> > > + reg:
> > > + items:
> > > + - description: RPU subsystem status and control registers
> > > +
> > > +patternProperties:
> > > + "^r5f-[a-f0-9]+$":
> > > + type: object
> > > + description: |
> > > + The RPU is located in the Low Power Domain of the Processor Subsystem.
> > > + Each processor includes separate L1 instruction and data caches and
> > > + tightly coupled memories (TCM). System memory is cacheable, but the TCM
> > > + memory space is non-cacheable.
> > > +
> > > + Each RPU contains one 64KB memory and two 32KB memories that
> > > + are accessed via the TCM A and B port interfaces, for a total of 128KB
> > > + per processor. In lock-step mode, the processor has access to 256KB of
> > > + TCM memory.
> > > +
> > > + properties:
> > > + compatible:
> > > + const: xlnx,zynqmp-r5f
> > > +
> > > + power-domains:
> > > + description: |
> > > + phandle to a PM domain provider node and an args specifier containing
> > > + the r5f0 and r5f1 node id value.
> > > +
> > > + reg:
> > > + items:
> > > + - description: RPU0 and RPU1 control and status registers
> > > +
> > > + mboxes:
> > > + items:
> > > + - description: |
> > > + Bi-directional channel to send data to RPU and receive ack from RPU.
> > > + Request and response message buffers are available and each buffer is 32 bytes.
> > > + - description: |
> > > + Bi-directional channel to receive data from RPU and send ack from RPU.
> > > + Request and response message buffers are available and each buffer is 32 bytes.
> > > + minItems: 1
> > > +
> > > + mbox-names:
> > > + items:
> > > + - const: tx
> > > + - const: rx
> > > + minItems: 1
> > > +
> > > + sram:
> > > + $ref: /schemas/types.yaml#/definitions/phandle-array
> > > + minItems: 1
> > > + description: |
> > > + phandles to one or more reserved on-chip SRAM regions. Other than TCM,
> > > + the RPU can execute instructions and access data from, the OCM memory,
> > > + the main DDR memory, and other system memories.
> > > +
> > > + The regions should be defined as child nodes of the respective SRAM
> > > + node, and should be defined as per the generic bindings in,
> > > + Documentation/devicetree/bindings/sram/sram.yaml
> > > +
> > > + memory-region:
> > > + $ref: /schemas/types.yaml#/definitions/phandle-array
> > > + description: |
> > > + List of phandles to the reserved memory regions associated with the
> > > + remoteproc device. This is variable and describes the memories shared with
> > > + the remote processor (e.g. remoteproc firmware and carveouts, rpmsg
> > > + vrings, ...). This reserved memory region will be allocated on DDR memory.
> > > + See Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
> > >
> > Aside from "compatible" and "power-domains", none of the above properties appear
> > in the example below, making this patchset harder to review.
> >
> > I am pretty sure to have commented on this earlier...
>
> In example, I have included only required property nodes.
>
> If you want, I can include other properties as well. However, some of the
> properties needs new bindings for example "sram".
>
> So, I can't include it as I don't know how bindings for them will look like.
>
I'm fine with that part.
> In next revision, I can include mboxes, mbox-names and memory-region
> properties. Is that fine?
>
> Also, should I add those nodes in actual device-tree now or later?
>
> For example, mboxes and mbox-names are not needed for driver as of now.
>
> So should I include them in dts now or later when I send rpmsg related
> patches?
Include in the example the properties currently supported by the driver. Not
all of them have to be in the DTS though.
>
> > More comments to come later or tomorrow.
> >
> > Thanks,
> > Mathieu
> >
> > > + required:
> > > + - compatible
> > > + - power-domains
> > > +
> > > + unevaluatedProperties: false
> > > +
> > > +required:
> > > + - compatible
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > + - |
> > > + r5fss: r5fss@ff9a0000 {
> > > + compatible = "xlnx,zynqmp-r5fss";
> > > + xlnx,cluster-mode = <1>;
> > > +
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + reg = <0xff9a0000 0x228>;
> > > +
> > > + r5f-0 {
> > > + compatible = "xlnx,zynqmp-r5f";
> > > + power-domains = <&zynqmp_firmware 0x7>;
> > > + };
> > > +
> > > + r5f-1 {
> > > + compatible = "xlnx,zynqmp-r5f";
> > > + power-domains = <&zynqmp_firmware 0x8>;
> > > + };
> > > + };
> > > +...
> > > diff --git a/include/dt-bindings/power/xlnx-zynqmp-power.h b/include/dt-bindings/power/xlnx-zynqmp-power.h
> > > index 0d9a412fd5e0..618024cbb20d 100644
> > > --- a/include/dt-bindings/power/xlnx-zynqmp-power.h
> > > +++ b/include/dt-bindings/power/xlnx-zynqmp-power.h
> > > @@ -6,6 +6,12 @@
> > > #ifndef _DT_BINDINGS_ZYNQMP_POWER_H
> > > #define _DT_BINDINGS_ZYNQMP_POWER_H
> > > +#define PD_RPU_0 7
> > > +#define PD_RPU_1 8
> > > +#define PD_R5_0_ATCM 15
> > > +#define PD_R5_0_BTCM 16
> > > +#define PD_R5_1_ATCM 17
> > > +#define PD_R5_1_BTCM 18
> > > #define PD_USB_0 22
> > > #define PD_USB_1 23
> > > #define PD_TTC_0 24
> > > --
> > > 2.25.1
> > >
next prev parent reply other threads:[~2022-02-22 16:36 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-10 11:28 [PATCH v3 0/6] Add Xilinx RPU subsystem support Tanmay Shah
2022-02-10 11:28 ` [PATCH v3 1/6] dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings Tanmay Shah
2022-02-14 18:22 ` Mathieu Poirier
2022-02-22 1:58 ` Tanmay Shah
2022-02-22 16:36 ` Mathieu Poirier [this message]
2022-02-10 11:28 ` [PATCH v3 2/6] arm64: dts: xilinx: zynqmp: Add RPU subsystem device node Tanmay Shah
2022-02-10 11:28 ` [PATCH v3 3/6] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration Tanmay Shah
2022-02-10 11:28 ` [PATCH v3 4/6] firmware: xilinx: Add shutdown/wakeup APIs Tanmay Shah
2022-02-10 11:28 ` [PATCH v3 5/6] firmware: xilinx: Add RPU configuration APIs Tanmay Shah
2022-02-10 11:28 ` [PATCH v3 6/6] drivers: remoteproc: Add Xilinx r5 remoteproc driver Tanmay Shah
2022-02-15 18:58 ` Mathieu Poirier
2022-02-22 1:59 ` Tanmay Shah
2022-02-16 18:26 ` Mathieu Poirier
2022-02-22 2:01 ` Tanmay Shah
2022-02-22 16:49 ` Mathieu Poirier
2022-02-18 19:11 ` Mathieu Poirier
2022-02-22 2:13 ` Tanmay Shah
2022-02-22 16:57 ` Mathieu Poirier
2022-02-22 18:08 ` Tanmay Shah
2022-03-09 7:18 ` Tanmay Shah
2022-03-10 15:36 ` Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220222163613.GA923552@p14s \
--to=mathieu.poirier@linaro.org \
--cc=arun.balaji.kannan@xilinx.com \
--cc=ben.levinsky@xilinx.com \
--cc=bill.mills@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=robh+dt@kernel.org \
--cc=sergei.korneichuk@xilinx.com \
--cc=tanmay.shah@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).