From: Jiri Slaby <jslaby@suse.cz>
To: gregkh@linuxfoundation.org
Cc: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
Jiri Slaby <jslaby@suse.cz>
Subject: [PATCH 1/5] tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned
Date: Thu, 24 Feb 2022 12:10:24 +0100 [thread overview]
Message-ID: <20220224111028.20917-2-jslaby@suse.cz> (raw)
In-Reply-To: <20220224111028.20917-1-jslaby@suse.cz>
All these return bitmasks, so it makes more sense to return unsigned --
this is what a reader and also all the callers expect.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/serial/mpc52xx_uart.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 2704dc988e4a..8a6958377764 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -83,11 +83,11 @@ static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port);
struct psc_ops {
void (*fifo_init)(struct uart_port *port);
- int (*raw_rx_rdy)(struct uart_port *port);
- int (*raw_tx_rdy)(struct uart_port *port);
- int (*rx_rdy)(struct uart_port *port);
- int (*tx_rdy)(struct uart_port *port);
- int (*tx_empty)(struct uart_port *port);
+ unsigned int (*raw_rx_rdy)(struct uart_port *port);
+ unsigned int (*raw_tx_rdy)(struct uart_port *port);
+ unsigned int (*rx_rdy)(struct uart_port *port);
+ unsigned int (*tx_rdy)(struct uart_port *port);
+ unsigned int (*tx_empty)(struct uart_port *port);
void (*stop_rx)(struct uart_port *port);
void (*start_tx)(struct uart_port *port);
void (*stop_tx)(struct uart_port *port);
@@ -203,34 +203,34 @@ static void mpc52xx_psc_fifo_init(struct uart_port *port)
out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
}
-static int mpc52xx_psc_raw_rx_rdy(struct uart_port *port)
+static unsigned int mpc52xx_psc_raw_rx_rdy(struct uart_port *port)
{
return in_be16(&PSC(port)->mpc52xx_psc_status)
& MPC52xx_PSC_SR_RXRDY;
}
-static int mpc52xx_psc_raw_tx_rdy(struct uart_port *port)
+static unsigned int mpc52xx_psc_raw_tx_rdy(struct uart_port *port)
{
return in_be16(&PSC(port)->mpc52xx_psc_status)
& MPC52xx_PSC_SR_TXRDY;
}
-static int mpc52xx_psc_rx_rdy(struct uart_port *port)
+static unsigned int mpc52xx_psc_rx_rdy(struct uart_port *port)
{
return in_be16(&PSC(port)->mpc52xx_psc_isr)
& port->read_status_mask
& MPC52xx_PSC_IMR_RXRDY;
}
-static int mpc52xx_psc_tx_rdy(struct uart_port *port)
+static unsigned int mpc52xx_psc_tx_rdy(struct uart_port *port)
{
return in_be16(&PSC(port)->mpc52xx_psc_isr)
& port->read_status_mask
& MPC52xx_PSC_IMR_TXRDY;
}
-static int mpc52xx_psc_tx_empty(struct uart_port *port)
+static unsigned int mpc52xx_psc_tx_empty(struct uart_port *port)
{
u16 sts = in_be16(&PSC(port)->mpc52xx_psc_status);
@@ -1365,7 +1365,7 @@ static const struct uart_ops mpc52xx_uart_ops = {
/* Interrupt handling */
/* ======================================================================== */
-static inline int
+static inline unsigned int
mpc52xx_uart_int_rx_chars(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
--
2.35.1
next prev parent reply other threads:[~2022-02-24 11:10 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-24 11:10 [PATCH 0/5] tty: serial: various cleanups Jiri Slaby
2022-02-24 11:10 ` Jiri Slaby [this message]
2022-04-03 15:36 ` [PATCH 1/5] tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned Guenter Roeck
2022-02-24 11:10 ` [PATCH 2/5] tty: serial: serial_txx9: remove info print from init Jiri Slaby
2022-02-24 11:10 ` [PATCH 3/5] tty: serial: serial_txx9: remove struct uart_txx9_port Jiri Slaby
2022-02-24 11:10 ` [PATCH 4/5] tty: serial: amba-pl010: use more uart_port pointers Jiri Slaby
2022-02-24 11:10 ` [PATCH 5/5] tty: serial: lpc32xx_hs: use serial_lpc32xx_stop_tx() helper Jiri Slaby
2022-02-25 9:39 ` [PATCH 0/5] tty: serial: various cleanups Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220224111028.20917-2-jslaby@suse.cz \
--to=jslaby@suse.cz \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).