From: <alexandru.tachici@analog.com>
To: <andrew@lunn.ch>
Cc: <o.rempel@pengutronix.de>, <alexandru.tachici@analog.com>,
<davem@davemloft.net>, <devicetree@vger.kernel.org>,
<hkallweit1@gmail.com>, <kuba@kernel.org>,
<linux-kernel@vger.kernel.org>, <linux@armlinux.org.uk>,
<netdev@vger.kernel.org>, <robh+dt@kernel.org>
Subject: [PATCH v5 1/7] ethtool: Add 10base-T1L link mode entry
Date: Thu, 24 Mar 2022 13:26:14 +0200 [thread overview]
Message-ID: <20220324112620.46963-2-alexandru.tachici@analog.com> (raw)
In-Reply-To: <20220324112620.46963-1-alexandru.tachici@analog.com>
From: Alexandru Tachici <alexandru.tachici@analog.com>
Add entry for the 10base-T1L full duplex mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
drivers/net/phy/phy-core.c | 3 ++-
include/uapi/linux/ethtool.h | 1 +
net/ethtool/common.c | 3 +++
3 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index 2001f3329133..1f2531a1a876 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c
@@ -13,7 +13,7 @@
*/
const char *phy_speed_to_str(int speed)
{
- BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 92,
+ BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 93,
"Enum ethtool_link_mode_bit_indices and phylib are out of sync. "
"If a speed or mode has been added please update phy_speed_to_str "
"and the PHY settings array.\n");
@@ -176,6 +176,7 @@ static const struct phy_setting settings[] = {
/* 10M */
PHY_SETTING( 10, FULL, 10baseT_Full ),
PHY_SETTING( 10, HALF, 10baseT_Half ),
+ PHY_SETTING( 10, FULL, 10baseT1L_Full ),
};
#undef PHY_SETTING
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 7bc4b8def12c..e0f0ee9bc89e 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -1691,6 +1691,7 @@ enum ethtool_link_mode_bit_indices {
ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT = 89,
ETHTOOL_LINK_MODE_100baseFX_Half_BIT = 90,
ETHTOOL_LINK_MODE_100baseFX_Full_BIT = 91,
+ ETHTOOL_LINK_MODE_10baseT1L_Full_BIT = 92,
/* must be last entry */
__ETHTOOL_LINK_MODE_MASK_NBITS
};
diff --git a/net/ethtool/common.c b/net/ethtool/common.c
index 0c5210015911..566adf85e658 100644
--- a/net/ethtool/common.c
+++ b/net/ethtool/common.c
@@ -201,6 +201,7 @@ const char link_mode_names[][ETH_GSTRING_LEN] = {
__DEFINE_LINK_MODE_NAME(400000, CR4, Full),
__DEFINE_LINK_MODE_NAME(100, FX, Half),
__DEFINE_LINK_MODE_NAME(100, FX, Full),
+ __DEFINE_LINK_MODE_NAME(10, T1L, Full),
};
static_assert(ARRAY_SIZE(link_mode_names) == __ETHTOOL_LINK_MODE_MASK_NBITS);
@@ -236,6 +237,7 @@ static_assert(ARRAY_SIZE(link_mode_names) == __ETHTOOL_LINK_MODE_MASK_NBITS);
#define __LINK_MODE_LANES_T1 1
#define __LINK_MODE_LANES_X 1
#define __LINK_MODE_LANES_FX 1
+#define __LINK_MODE_LANES_T1L 1
#define __DEFINE_LINK_MODE_PARAMS(_speed, _type, _duplex) \
[ETHTOOL_LINK_MODE(_speed, _type, _duplex)] = { \
@@ -349,6 +351,7 @@ const struct link_mode_info link_mode_params[] = {
__DEFINE_LINK_MODE_PARAMS(400000, CR4, Full),
__DEFINE_LINK_MODE_PARAMS(100, FX, Half),
__DEFINE_LINK_MODE_PARAMS(100, FX, Full),
+ __DEFINE_LINK_MODE_PARAMS(10, T1L, Full),
};
static_assert(ARRAY_SIZE(link_mode_params) == __ETHTOOL_LINK_MODE_MASK_NBITS);
--
2.25.1
next prev parent reply other threads:[~2022-03-24 11:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-24 11:26 [PATCH v5 0/7] net: phy: adin1100: Add initial support for ADIN1100 industrial PHY alexandru.tachici
2022-03-24 11:26 ` alexandru.tachici [this message]
2022-03-24 11:26 ` [PATCH v5 2/7] net: phy: Add 10-BaseT1L registers alexandru.tachici
2022-03-24 11:26 ` [PATCH v5 3/7] net: phy: Add BaseT1 auto-negotiation registers alexandru.tachici
2022-03-24 11:26 ` [PATCH v5 4/7] net: phy: Add 10BASE-T1L support in phy-c45 alexandru.tachici
2022-03-24 11:26 ` [PATCH v5 5/7] net: phy: adin1100: Add initial support for ADIN1100 industrial PHY alexandru.tachici
2022-04-10 5:11 ` Ramon Fried
2022-04-10 5:12 ` Ramon Fried
2022-04-12 0:17 ` Zhou Furong
2022-03-24 11:26 ` [PATCH v5 6/7] net: phy: adin1100: Add SQI support alexandru.tachici
2022-03-24 11:26 ` [PATCH v5 7/7] dt-bindings: net: phy: Add 10-baseT1L 2.4 Vpp alexandru.tachici
2022-03-24 23:00 ` [PATCH v5 0/7] net: phy: adin1100: Add initial support for ADIN1100 industrial PHY Jakub Kicinski
2022-04-07 12:05 ` Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220324112620.46963-2-alexandru.tachici@analog.com \
--to=alexandru.tachici@analog.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).