linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Meng Li <li.meng@amd.com>
To: Shuah Khan <skhan@linuxfoundation.org>,
	"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>,
	Huang Rui <ray.huang@amd.com>, <linux-pm@vger.kernel.org>
Cc: Nathan Fontenot <nathan.fontenot@amd.com>,
	Deepak Sharma <deepak.sharma@amd.com>,
	Alex Deucher <alexander.deucher@amd.com>,
	"Mario Limonciello" <mario.limonciello@amd.com>,
	Jinzhou Su <Jinzhou.Su@amd.com>, Perry Yuan <Perry.Yuan@amd.com>,
	Xiaojian Du <Xiaojian.Du@amd.com>,
	"Viresh Kumar" <viresh.kumar@linaro.org>,
	Borislav Petkov <bp@alien8.de>, <linux-kernel@vger.kernel.org>,
	Meng Li <li.meng@amd.com>
Subject: [PATCH 1/3] cpufreq: amd-pstate: Expose struct amd_cpudata
Date: Wed, 13 Apr 2022 17:05:08 +0800	[thread overview]
Message-ID: <20220413090510.4039589-2-li.meng@amd.com> (raw)
In-Reply-To: <20220413090510.4039589-1-li.meng@amd.com>

Expose struct amd_cpudata to AMD P-State unit test module.

This data struct will be used on the following AMD P-State unit test
(amd-pstate-ut) module. The amd-pstate-ut module can get some AMD
infomations by this data struct. For example: highest perf,
nominal perf, boost supported etc.

Signed-off-by: Meng Li <li.meng@amd.com>
---
 MAINTAINERS                  |  1 +
 drivers/cpufreq/amd-pstate.c | 60 +----------------------------
 include/linux/amd-pstate.h   | 74 ++++++++++++++++++++++++++++++++++++
 3 files changed, 76 insertions(+), 59 deletions(-)
 create mode 100644 include/linux/amd-pstate.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 9832b607e2e2..f108e83ba851 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1003,6 +1003,7 @@ S:	Supported
 F:	Documentation/admin-guide/pm/amd-pstate.rst
 F:	drivers/cpufreq/amd-pstate*
 F:	tools/power/x86/amd_pstate_tracer/amd_pstate_trace.py
+F:	include/linux/amd-pstate.h
 
 AMD PTDMA DRIVER
 M:	Sanjay R Mehta <sanju.mehta@amd.com>
diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index 7be38bc6a673..5f7a00a64f76 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -36,6 +36,7 @@
 #include <linux/delay.h>
 #include <linux/uaccess.h>
 #include <linux/static_call.h>
+#include <linux/amd-pstate.h>
 
 #include <acpi/processor.h>
 #include <acpi/cppc_acpi.h>
@@ -65,65 +66,6 @@ MODULE_PARM_DESC(shared_mem,
 
 static struct cpufreq_driver amd_pstate_driver;
 
-/**
- * struct  amd_aperf_mperf
- * @aperf: actual performance frequency clock count
- * @mperf: maximum performance frequency clock count
- * @tsc:   time stamp counter
- */
-struct amd_aperf_mperf {
-	u64 aperf;
-	u64 mperf;
-	u64 tsc;
-};
-
-/**
- * struct amd_cpudata - private CPU data for AMD P-State
- * @cpu: CPU number
- * @req: constraint request to apply
- * @cppc_req_cached: cached performance request hints
- * @highest_perf: the maximum performance an individual processor may reach,
- *		  assuming ideal conditions
- * @nominal_perf: the maximum sustained performance level of the processor,
- *		  assuming ideal operating conditions
- * @lowest_nonlinear_perf: the lowest performance level at which nonlinear power
- *			   savings are achieved
- * @lowest_perf: the absolute lowest performance level of the processor
- * @max_freq: the frequency that mapped to highest_perf
- * @min_freq: the frequency that mapped to lowest_perf
- * @nominal_freq: the frequency that mapped to nominal_perf
- * @lowest_nonlinear_freq: the frequency that mapped to lowest_nonlinear_perf
- * @cur: Difference of Aperf/Mperf/tsc count between last and current sample
- * @prev: Last Aperf/Mperf/tsc count value read from register
- * @freq: current cpu frequency value
- * @boost_supported: check whether the Processor or SBIOS supports boost mode
- *
- * The amd_cpudata is key private data for each CPU thread in AMD P-State, and
- * represents all the attributes and goals that AMD P-State requests at runtime.
- */
-struct amd_cpudata {
-	int	cpu;
-
-	struct	freq_qos_request req[2];
-	u64	cppc_req_cached;
-
-	u32	highest_perf;
-	u32	nominal_perf;
-	u32	lowest_nonlinear_perf;
-	u32	lowest_perf;
-
-	u32	max_freq;
-	u32	min_freq;
-	u32	nominal_freq;
-	u32	lowest_nonlinear_freq;
-
-	struct amd_aperf_mperf cur;
-	struct amd_aperf_mperf prev;
-
-	u64 freq;
-	bool	boost_supported;
-};
-
 static inline int pstate_enable(bool enable)
 {
 	return wrmsrl_safe(MSR_AMD_CPPC_ENABLE, enable);
diff --git a/include/linux/amd-pstate.h b/include/linux/amd-pstate.h
new file mode 100644
index 000000000000..790b04c9000b
--- /dev/null
+++ b/include/linux/amd-pstate.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * linux/include/linux/amd-pstate.h
+ *
+ * Copyright (C) 2007-2010 Advanced Micro Devices, Inc.
+ * Author: Meng Li <li.meng@amd.com>
+ */
+#ifndef _LINUX_AMD_PSTATE_H
+#define _LINUX_AMD_PSTATE_H
+
+#include <linux/pm_qos.h>
+/*********************************************************************
+ *                        AMD P-state INTERFACE                       *
+ *********************************************************************/
+/**
+ * struct  amd_aperf_mperf
+ * @aperf: actual performance frequency clock count
+ * @mperf: maximum performance frequency clock count
+ * @tsc:   time stamp counter
+ */
+struct amd_aperf_mperf {
+	u64 aperf;
+	u64 mperf;
+	u64 tsc;
+};
+
+/**
+ * struct amd_cpudata - private CPU data for AMD P-State
+ * @cpu: CPU number
+ * @req: constraint request to apply
+ * @cppc_req_cached: cached performance request hints
+ * @highest_perf: the maximum performance an individual processor may reach,
+ *		  assuming ideal conditions
+ * @nominal_perf: the maximum sustained performance level of the processor,
+ *		  assuming ideal operating conditions
+ * @lowest_nonlinear_perf: the lowest performance level at which nonlinear power
+ *			   savings are achieved
+ * @lowest_perf: the absolute lowest performance level of the processor
+ * @max_freq: the frequency that mapped to highest_perf
+ * @min_freq: the frequency that mapped to lowest_perf
+ * @nominal_freq: the frequency that mapped to nominal_perf
+ * @lowest_nonlinear_freq: the frequency that mapped to lowest_nonlinear_perf
+ * @cur: Difference of Aperf/Mperf/tsc count between last and current sample
+ * @prev: Last Aperf/Mperf/tsc count value read from register
+ * @freq: current cpu frequency value
+ * @boost_supported: check whether the Processor or SBIOS supports boost mode
+ *
+ * The amd_cpudata is key private data for each CPU thread in AMD P-State, and
+ * represents all the attributes and goals that AMD P-State requests at runtime.
+ */
+struct amd_cpudata {
+	int	cpu;
+
+	struct	freq_qos_request req[2];
+	u64	cppc_req_cached;
+
+	u32	highest_perf;
+	u32	nominal_perf;
+	u32	lowest_nonlinear_perf;
+	u32	lowest_perf;
+
+	u32	max_freq;
+	u32	min_freq;
+	u32	nominal_freq;
+	u32	lowest_nonlinear_freq;
+
+	struct amd_aperf_mperf cur;
+	struct amd_aperf_mperf prev;
+
+	u64	freq;
+	bool	boost_supported;
+};
+
+#endif /* _LINUX_AMD_PSTATE_H */
-- 
2.25.1


  reply	other threads:[~2022-04-13  9:06 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-13  9:05 [PATCH v2 0/3] Add unit test module for AMD P-State driver Meng Li
2022-04-13  9:05 ` Meng Li [this message]
2022-04-17  2:09   ` [PATCH 1/3] cpufreq: amd-pstate: Expose struct amd_cpudata Huang Rui
2022-04-13  9:05 ` [PATCH 2/3] selftests: cpufreq: Add wapper script for test AMD P-State Meng Li
2022-04-13 19:55   ` Nathan Fontenot
2022-04-13  9:05 ` [PATCH 3/3] selftests: cpufreq: Add amd_pstate_testmod kernel module for testing Meng Li
2022-04-13 20:16   ` Nathan Fontenot
2022-04-17 14:54   ` Huang Rui
2022-04-13 15:41 ` [PATCH v2 0/3] Add unit test module for AMD P-State driver Rafael J. Wysocki
2022-04-17  1:38   ` Huang Rui
  -- strict thread matches above, loose matches on Subject: below --
2022-03-23  7:14 [PATCH " Meng Li
2022-03-23  7:15 ` [PATCH 1/3] cpufreq: amd-pstate: Expose struct amd_cpudata Meng Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220413090510.4039589-2-li.meng@amd.com \
    --to=li.meng@amd.com \
    --cc=Jinzhou.Su@amd.com \
    --cc=Perry.Yuan@amd.com \
    --cc=Xiaojian.Du@amd.com \
    --cc=alexander.deucher@amd.com \
    --cc=bp@alien8.de \
    --cc=deepak.sharma@amd.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mario.limonciello@amd.com \
    --cc=nathan.fontenot@amd.com \
    --cc=rafael.j.wysocki@intel.com \
    --cc=ray.huang@amd.com \
    --cc=skhan@linuxfoundation.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).