From: <andrea.merello@iit.it>
To: <jic23@kernel.org>, <mchehab+huawei@kernel.org>,
<linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>
Cc: <lars@metafoo.de>, <robh+dt@kernel.org>,
<andy.shevchenko@gmail.com>, <matt.ranostay@konsulko.com>,
<ardeleanalex@gmail.com>, <jacopo@jmondi.org>,
Andrea Merello <andrea.merello@iit.it>
Subject: [v6 13/14] iio: imu: add BNO055 I2C driver
Date: Mon, 13 Jun 2022 14:05:33 +0200 [thread overview]
Message-ID: <20220613120534.36991-14-andrea.merello@iit.it> (raw)
In-Reply-To: <20220613120534.36991-1-andrea.merello@iit.it>
From: Andrea Merello <andrea.merello@iit.it>
Add an I2C driver for communicating to a BNO055 IMU via I2C bus and enable
the BNO055 core driver to work in this scenario.
Signed-off-by: Andrea Merello <andrea.merello@iit.it>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
drivers/iio/imu/bno055/Kconfig | 11 ++++++
drivers/iio/imu/bno055/Makefile | 2 +
drivers/iio/imu/bno055/bno055_i2c.c | 57 +++++++++++++++++++++++++++++
3 files changed, 70 insertions(+)
create mode 100644 drivers/iio/imu/bno055/bno055_i2c.c
diff --git a/drivers/iio/imu/bno055/Kconfig b/drivers/iio/imu/bno055/Kconfig
index d014b68cd43d..ccf9ea7c50f8 100644
--- a/drivers/iio/imu/bno055/Kconfig
+++ b/drivers/iio/imu/bno055/Kconfig
@@ -12,3 +12,14 @@ config BOSCH_BNO055_SERIAL
This driver can also be built as a module. If so, the module will be
called bno055_sl.
+
+config BOSCH_BNO055_I2C
+ tristate "Bosch BNO055 attached via I2C bus"
+ depends on I2C
+ select REGMAP_I2C
+ select BOSCH_BNO055_IIO
+ help
+ Enable this to support Bosch BNO055 IMUs attached via I2C bus.
+
+ This driver can also be built as a module. If so, the module will be
+ called bno055_i2c.
diff --git a/drivers/iio/imu/bno055/Makefile b/drivers/iio/imu/bno055/Makefile
index 212307ce9c08..f0be80accb5b 100644
--- a/drivers/iio/imu/bno055/Makefile
+++ b/drivers/iio/imu/bno055/Makefile
@@ -6,3 +6,5 @@ bno055_ser-y := bno055_ser_core.o
# define_trace.h needs to know how to find our header
CFLAGS_bno055_ser_trace.o := -I$(src)
bno055_ser-$(CONFIG_TRACING) += bno055_ser_trace.o
+
+obj-$(CONFIG_BOSCH_BNO055_I2C) += bno055_i2c.o
diff --git a/drivers/iio/imu/bno055/bno055_i2c.c b/drivers/iio/imu/bno055/bno055_i2c.c
new file mode 100644
index 000000000000..9bb256fdb0d3
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055_i2c.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for I2C-interfaced Bosch BNO055 IMU.
+ *
+ * Copyright (C) 2021-2022 Istituto Italiano di Tecnologia
+ * Electronic Design Laboratory
+ * Written by Andrea Merello <andrea.merello@iit.it>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "bno055.h"
+
+#define BNO055_I2C_XFER_BURST_BREAK_THRESHOLD 3 /* FIXME */
+
+static int bno055_i2c_probe(struct i2c_client *client)
+{
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_i2c(client, &bno055_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(&client->dev, PTR_ERR(regmap),
+ "Unable to init register map");
+
+ return bno055_probe(&client->dev, regmap,
+ BNO055_I2C_XFER_BURST_BREAK_THRESHOLD, true);
+}
+
+static const struct i2c_device_id bno055_i2c_id[] = {
+ {"bno055", 0},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, bno055_i2c_id);
+
+static const struct of_device_id __maybe_unused bno055_i2c_of_match[] = {
+ { .compatible = "bosch,bno055" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bno055_i2c_of_match);
+
+static struct i2c_driver bno055_driver = {
+ .driver = {
+ .name = "bno055-i2c",
+ .of_match_table = of_match_ptr(bno055_i2c_of_match),
+ },
+ .probe_new = bno055_i2c_probe,
+ .id_table = bno055_i2c_id,
+};
+module_i2c_driver(bno055_driver);
+
+MODULE_AUTHOR("Andrea Merello");
+MODULE_DESCRIPTION("Bosch BNO055 I2C interface");
+MODULE_IMPORT_NS(IIO_BNO055);
+MODULE_LICENSE("GPL");
--
2.17.1
next prev parent reply other threads:[~2022-06-14 12:28 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-13 12:05 [v6 00/14] Add support for Bosch BNO055 IMU andrea.merello
2022-06-13 12:05 ` [v6 01/14] iio: add modifiers for linear acceleration andrea.merello
2022-06-13 12:05 ` [v6 02/14] iio: document linear acceleration modifiers andrea.merello
2022-06-13 12:05 ` [v6 03/14] iio: event_monitor: add " andrea.merello
2022-06-13 12:05 ` [v6 04/14] iio: add modifers for pitch, yaw, roll andrea.merello
2022-06-13 12:05 ` [v6 05/14] iio: document pitch, yaw, roll modifiers andrea.merello
2022-06-13 12:05 ` [v6 06/14] iio: event_monitor: add pitch, yaw and " andrea.merello
2022-06-13 12:05 ` [v6 07/14] iio: add support for binary attributes andrea.merello
2022-06-13 12:05 ` [v6 08/14] iio: imu: add Bosch Sensortec BNO055 core driver andrea.merello
2022-06-13 16:44 ` Andy Shevchenko
2022-06-14 9:11 ` Andrea Merello
2022-06-14 10:58 ` Andy Shevchenko
2022-06-14 12:15 ` Andrea Merello
2022-06-14 15:10 ` Andy Shevchenko
2022-06-14 15:27 ` Andrea Merello
2022-06-18 17:26 ` Jonathan Cameron
2022-06-13 12:05 ` [v6 09/14] iio: document bno055 private sysfs attributes andrea.merello
2022-06-13 12:05 ` [v6 10/14] iio: document "serialnumber" sysfs attribute andrea.merello
2022-06-13 12:05 ` [v6 11/14] dt-bindings: iio/imu: Add Bosch BNO055 andrea.merello
2022-06-13 12:05 ` [v6 12/14] iio: imu: add BNO055 serdev driver andrea.merello
2022-06-13 16:52 ` Andy Shevchenko
2022-06-15 20:57 ` kernel test robot
2022-06-15 21:13 ` Andy Shevchenko
2022-06-15 21:15 ` Andy Shevchenko
2022-07-03 1:52 ` kernel test robot
2022-06-13 12:05 ` andrea.merello [this message]
2022-06-13 12:05 ` [v6 14/14] docs: iio: add documentation for BNO055 driver andrea.merello
2022-07-03 7:58 ` kernel test robot
2022-07-03 13:11 ` Bagas Sanjaya
2022-07-03 14:00 ` Andy Shevchenko
2022-07-04 1:21 ` Bagas Sanjaya
2022-07-04 3:40 ` [PATCH v2] Documentation: bno055: separate SPDX identifier and page title Bagas Sanjaya
2022-07-04 19:49 ` Andy Shevchenko
2022-07-05 1:13 ` Bagas Sanjaya
2022-07-05 9:02 ` Andy Shevchenko
2022-07-13 16:09 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220613120534.36991-14-andrea.merello@iit.it \
--to=andrea.merello@iit.it \
--cc=andy.shevchenko@gmail.com \
--cc=ardeleanalex@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jacopo@jmondi.org \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matt.ranostay@konsulko.com \
--cc=mchehab+huawei@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).