From: Elliot Berman <quic_eberman@quicinc.com>
To: Bjorn Andersson <quic_bjorande@quicinc.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>
Cc: Elliot Berman <quic_eberman@quicinc.com>,
Murali Nalajala <quic_mnalajal@quicinc.com>,
Trilok Soni <quic_tsoni@quicinc.com>,
"Srivatsa Vaddagiri" <quic_svaddagi@quicinc.com>,
Carl van Schaik <quic_cvanscha@quicinc.com>,
Andy Gross <agross@kernel.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Jassi Brar <jassisinghbrar@gmail.com>,
<linux-arm-kernel@lists.infradead.org>,
Mark Rutland <mark.rutland@arm.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Sudeep Holla <sudeep.holla@arm.com>,
Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Jonathan Corbet <corbet@lwn.net>, "Will Deacon" <will@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
"Arnd Bergmann" <arnd@arndb.de>, <devicetree@vger.kernel.org>,
<linux-doc@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v4 14/14] tty: gunyah: Add tty console driver for RM Console Services
Date: Wed, 28 Sep 2022 12:56:33 -0700 [thread overview]
Message-ID: <20220928195633.2348848-15-quic_eberman@quicinc.com> (raw)
In-Reply-To: <20220928195633.2348848-1-quic_eberman@quicinc.com>
Gunyah provides a console for each VM using the VM console resource
manager APIs. This driver allows console data from other
VMs to be accessed via a TTY device and exports a console device to dump
Linux's own logs to our console.
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
---
MAINTAINERS | 1 +
drivers/tty/Kconfig | 8 +
drivers/tty/Makefile | 1 +
drivers/tty/gunyah_tty.c | 409 +++++++++++++++++++++++++++++++++++++++
4 files changed, 419 insertions(+)
create mode 100644 drivers/tty/gunyah_tty.c
diff --git a/MAINTAINERS b/MAINTAINERS
index a0cba618e5f6..e8d4a6d9491a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8890,6 +8890,7 @@ F: Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml
F: Documentation/virt/gunyah/
F: arch/arm64/gunyah/
F: drivers/mailbox/gunyah-msgq.c
+F: drivers/tty/gunyah_tty.c
F: drivers/virt/gunyah/
F: include/asm-generic/gunyah.h
F: include/linux/gunyah*.h
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index cc30ff93e2e4..ff86e977f9ac 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -380,6 +380,14 @@ config RPMSG_TTY
To compile this driver as a module, choose M here: the module will be
called rpmsg_tty.
+config GUNYAH_CONSOLE
+ tristate "Gunyah Consoles"
+ depends on GUNYAH
+ help
+ This enables support for console output using Gunyah's Resource Manager RPC.
+ This is normally used when a secondary VM which does not have exclusive access
+ to a real or virtualized serial device and virtio-console is unavailable.
+
endif # TTY
source "drivers/tty/serdev/Kconfig"
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index 07aca5184a55..d183fbfd835b 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -27,5 +27,6 @@ obj-$(CONFIG_GOLDFISH_TTY) += goldfish.o
obj-$(CONFIG_MIPS_EJTAG_FDC_TTY) += mips_ejtag_fdc.o
obj-$(CONFIG_VCC) += vcc.o
obj-$(CONFIG_RPMSG_TTY) += rpmsg_tty.o
+obj-$(CONFIG_GUNYAH_CONSOLE) += gunyah_tty.o
obj-y += ipwireless/
diff --git a/drivers/tty/gunyah_tty.c b/drivers/tty/gunyah_tty.c
new file mode 100644
index 000000000000..80a20da11ad0
--- /dev/null
+++ b/drivers/tty/gunyah_tty.c
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#define pr_fmt(fmt) "gh_rsc_mgr_console: " fmt
+
+#include <linux/gunyah_rsc_mgr.h>
+#include <linux/auxiliary_bus.h>
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <linux/tty_flip.h>
+#include <linux/console.h>
+#include <linux/module.h>
+#include <linux/kfifo.h>
+#include <linux/kref.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+
+/*
+ * The Linux TTY code does not support dynamic addition of tty derived devices so we need to know
+ * how many tty devices we might need when space is allocated for the tty device. Since VMs might be
+ * added/removed dynamically, we need to make sure we have enough allocated.
+ */
+#define RSC_MGR_TTY_ADAPTERS 16
+
+/* # of payload bytes that can fit in a 1-fragment CONSOLE_WRITE message */
+#define RM_CONS_WRITE_MSG_SIZE ((1 * (GH_MSGQ_MAX_MSG_SIZE - 8)) - 4)
+
+struct rm_cons_port {
+ struct tty_port port;
+ u16 vmid;
+ bool open;
+ unsigned int index;
+
+ DECLARE_KFIFO(put_fifo, char, 1024);
+ spinlock_t fifo_lock;
+ struct work_struct put_work;
+
+ struct rm_cons_data *cons_data;
+};
+
+struct rm_cons_data {
+ struct tty_driver *tty_driver;
+ struct device *dev;
+
+ spinlock_t ports_lock;
+ struct rm_cons_port *ports[RSC_MGR_TTY_ADAPTERS];
+
+ struct notifier_block rsc_mgr_notif;
+ struct console console;
+};
+
+static void put_work_fn(struct work_struct *ws)
+{
+ char buf[RM_CONS_WRITE_MSG_SIZE];
+ int count, ret;
+ struct rm_cons_port *port = container_of(ws, struct rm_cons_port, put_work);
+
+ while (!kfifo_is_empty(&port->put_fifo)) {
+ count = kfifo_out_spinlocked(&port->put_fifo, buf, sizeof(buf), &port->fifo_lock);
+ if (count <= 0)
+ continue;
+
+ ret = gh_rm_console_write(port->vmid, buf, count);
+ if (ret) {
+ pr_warn_once("failed to send characters: %d\n", ret);
+ break;
+ }
+ }
+}
+
+static int rsc_mgr_console_notif(struct notifier_block *nb, unsigned long cmd, void *data)
+{
+ int count, i;
+ struct rm_cons_port *rm_port = NULL;
+ struct tty_port *tty_port = NULL;
+ struct rm_cons_data *cons_data = container_of(nb, struct rm_cons_data, rsc_mgr_notif);
+ const struct gh_rm_notification *notif = data;
+ struct gh_rm_notif_vm_console_chars const * const msg = notif->buff;
+
+ if (cmd != GH_RM_NOTIF_VM_CONSOLE_CHARS ||
+ notif->size < sizeof(*msg))
+ return NOTIFY_DONE;
+
+ spin_lock(&cons_data->ports_lock);
+ for (i = 0; i < RSC_MGR_TTY_ADAPTERS; i++) {
+ if (!cons_data->ports[i])
+ continue;
+ if (cons_data->ports[i]->vmid == msg->vmid) {
+ rm_port = cons_data->ports[i];
+ break;
+ }
+ }
+ if (rm_port)
+ tty_port = tty_port_get(&rm_port->port);
+ spin_unlock(&cons_data->ports_lock);
+
+ if (!rm_port)
+ pr_warn("Received unexpected console characters for VMID %u\n", msg->vmid);
+ if (!tty_port)
+ return NOTIFY_DONE;
+
+ count = tty_buffer_request_room(tty_port, msg->num_bytes);
+ tty_insert_flip_string(tty_port, msg->bytes, count);
+ tty_flip_buffer_push(tty_port);
+
+ tty_port_put(tty_port);
+ return NOTIFY_OK;
+}
+
+static ssize_t vmid_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct rm_cons_port *rm_port = dev_get_drvdata(dev);
+
+ if (rm_port->vmid == GH_VMID_SELF)
+ return sysfs_emit(buf, "self\n");
+
+ return sysfs_emit(buf, "%u\n", rm_port->vmid);
+}
+
+static DEVICE_ATTR_RO(vmid);
+
+static struct attribute *rsc_mgr_tty_dev_attrs[] = {
+ &dev_attr_vmid.attr,
+ NULL
+};
+
+static const struct attribute_group rsc_mgr_tty_dev_attr_group = {
+ .attrs = rsc_mgr_tty_dev_attrs,
+};
+
+static const struct attribute_group *rsc_mgr_tty_dev_attr_groups[] = {
+ &rsc_mgr_tty_dev_attr_group,
+ NULL
+};
+
+static int rsc_mgr_tty_open(struct tty_struct *tty, struct file *filp)
+{
+ int ret;
+ struct rm_cons_port *rm_port = dev_get_drvdata(tty->dev);
+
+ if (!rm_port->open) {
+ ret = gh_rm_console_open(rm_port->vmid);
+ if (ret) {
+ pr_err("Failed to open RM console for vmid %x: %d\n", rm_port->vmid, ret);
+ return ret;
+ }
+ rm_port->open = true;
+ }
+
+ return tty_port_open(&rm_port->port, tty, filp);
+}
+
+static void rsc_mgr_tty_close(struct tty_struct *tty, struct file *filp)
+{
+ int ret;
+ struct rm_cons_port *rm_port = dev_get_drvdata(tty->dev);
+
+ if (rm_port->open) {
+ if (rm_port->vmid != GH_VMID_SELF) {
+ ret = gh_rm_console_close(rm_port->vmid);
+ if (ret)
+ pr_warn("Failed to close RM console for vmid %d: %d\n",
+ rm_port->vmid, ret);
+ }
+ rm_port->open = false;
+
+ tty_port_close(&rm_port->port, tty, filp);
+ }
+
+}
+
+static int rsc_mgr_tty_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+ struct rm_cons_port *rm_port = dev_get_drvdata(tty->dev);
+ int ret;
+
+ ret = kfifo_in_spinlocked(&rm_port->put_fifo, buf, count, &rm_port->fifo_lock);
+ if (ret > 0)
+ schedule_work(&rm_port->put_work);
+
+ return ret;
+}
+
+static unsigned int rsc_mgr_mgr_tty_write_room(struct tty_struct *tty)
+{
+ struct rm_cons_port *rm_port = dev_get_drvdata(tty->dev);
+
+ return kfifo_avail(&rm_port->put_fifo);
+}
+
+static void rsc_mgr_console_write(struct console *co, const char *buf, unsigned count)
+{
+ struct rm_cons_port *rm_port = co->data;
+ int ret;
+
+ ret = kfifo_in_spinlocked(&rm_port->put_fifo, buf, count, &rm_port->fifo_lock);
+ if (ret > 0)
+ schedule_work(&rm_port->put_work);
+}
+
+static struct tty_driver *rsc_mgr_console_device(struct console *co, int *index)
+{
+ struct rm_cons_port *rm_port = co->data;
+
+ *index = rm_port->index;
+ return rm_port->port.tty->driver;
+}
+
+static int rsc_mgr_console_setup(struct console *co, char *unused)
+{
+ int ret;
+ struct rm_cons_port *rm_port = co->data;
+
+ if (!rm_port->open) {
+ ret = gh_rm_console_open(rm_port->vmid);
+ if (ret) {
+ pr_err("Failed to open RM console for vmid %x: %d\n", rm_port->vmid, ret);
+ return ret;
+ }
+ rm_port->open = true;
+ }
+
+ return 0;
+}
+
+static int rsc_mgr_console_exit(struct console *co)
+{
+ int ret;
+ struct rm_cons_port *rm_port = co->data;
+
+ if (rm_port->open) {
+ ret = gh_rm_console_close(rm_port->vmid);
+ if (ret) {
+ pr_err("Failed to close RM console for vmid %x: %d\n", rm_port->vmid, ret);
+ return ret;
+ }
+ rm_port->open = false;
+ }
+
+ return 0;
+}
+
+static const struct tty_operations rsc_mgr_tty_ops = {
+ .open = rsc_mgr_tty_open,
+ .close = rsc_mgr_tty_close,
+ .write = rsc_mgr_tty_write,
+ .write_room = rsc_mgr_mgr_tty_write_room,
+};
+
+static void rsc_mgr_port_destruct(struct tty_port *port)
+{
+ struct rm_cons_port *rm_port = container_of(port, struct rm_cons_port, port);
+ struct rm_cons_data *cons_data = rm_port->cons_data;
+
+ spin_lock(&cons_data->ports_lock);
+ WARN_ON(cons_data->ports[rm_port->index] != rm_port);
+ cons_data->ports[rm_port->index] = NULL;
+ spin_unlock(&cons_data->ports_lock);
+ kfree(rm_port);
+}
+
+static const struct tty_port_operations rsc_mgr_port_ops = {
+ .destruct = rsc_mgr_port_destruct,
+};
+
+static struct rm_cons_port *rsc_mgr_port_create(struct rm_cons_data *cons_data, u16 vmid)
+{
+ struct rm_cons_port *rm_port;
+ struct device *ttydev;
+ unsigned int index;
+ int ret;
+
+ rm_port = kzalloc(sizeof(*rm_port), GFP_KERNEL);
+ rm_port->vmid = vmid;
+ INIT_KFIFO(rm_port->put_fifo);
+ spin_lock_init(&rm_port->fifo_lock);
+ INIT_WORK(&rm_port->put_work, put_work_fn);
+ tty_port_init(&rm_port->port);
+ rm_port->port.ops = &rsc_mgr_port_ops;
+
+ spin_lock(&cons_data->ports_lock);
+ for (index = 0; index < RSC_MGR_TTY_ADAPTERS; index++) {
+ if (!cons_data->ports[index]) {
+ cons_data->ports[index] = rm_port;
+ rm_port->index = index;
+ break;
+ }
+ }
+ spin_unlock(&cons_data->ports_lock);
+ if (index >= RSC_MGR_TTY_ADAPTERS) {
+ ret = -ENOSPC;
+ goto err_put_port;
+ }
+
+ ttydev = tty_port_register_device_attr(&rm_port->port, cons_data->tty_driver, index,
+ cons_data->dev, rm_port, rsc_mgr_tty_dev_attr_groups);
+ if (IS_ERR(ttydev)) {
+ ret = PTR_ERR(ttydev);
+ goto err_put_port;
+ }
+
+ return rm_port;
+err_put_port:
+ tty_port_put(&rm_port->port);
+ return ERR_PTR(ret);
+}
+
+static int rsc_mgr_console_probe(struct auxiliary_device *auxdev,
+ const struct auxiliary_device_id *aux_dev_id)
+{
+ struct rm_cons_data *cons_data;
+ struct rm_cons_port *rm_port;
+ int ret;
+ u16 vmid;
+
+ cons_data = devm_kzalloc(&auxdev->dev, sizeof(*cons_data), GFP_KERNEL);
+ if (!cons_data)
+ return -ENOMEM;
+ dev_set_drvdata(&auxdev->dev, cons_data);
+ cons_data->dev = &auxdev->dev;
+
+ cons_data->tty_driver = tty_alloc_driver(RSC_MGR_TTY_ADAPTERS,
+ TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV);
+ if (IS_ERR(cons_data->tty_driver))
+ return PTR_ERR(cons_data->tty_driver);
+
+ cons_data->tty_driver->driver_name = "gh";
+ cons_data->tty_driver->name = "ttyGH";
+ cons_data->tty_driver->type = TTY_DRIVER_TYPE_SYSTEM;
+ cons_data->tty_driver->init_termios = tty_std_termios;
+ tty_set_operations(cons_data->tty_driver, &rsc_mgr_tty_ops);
+
+ ret = tty_register_driver(cons_data->tty_driver);
+ if (ret) {
+ dev_err(&auxdev->dev, "Could not register tty driver: %d\n", ret);
+ goto err_put_tty;
+ }
+
+ spin_lock_init(&cons_data->ports_lock);
+
+ cons_data->rsc_mgr_notif.notifier_call = rsc_mgr_console_notif;
+ ret = gh_rm_register_notifier(&cons_data->rsc_mgr_notif);
+ if (ret) {
+ dev_err(&auxdev->dev, "Could not register for resource manager notifications: %d\n",
+ ret);
+ goto err_put_tty;
+ }
+
+ rm_port = rsc_mgr_port_create(cons_data, GH_VMID_SELF);
+ if (IS_ERR(rm_port)) {
+ ret = PTR_ERR(rm_port);
+ dev_err(&auxdev->dev, "Could not create own console: %d\n", ret);
+ goto err_unreg_notif;
+ }
+
+ strncpy(cons_data->console.name, "ttyGH", sizeof(cons_data->console.name));
+ cons_data->console.write = rsc_mgr_console_write;
+ cons_data->console.device = rsc_mgr_console_device;
+ cons_data->console.setup = rsc_mgr_console_setup;
+ cons_data->console.exit = rsc_mgr_console_exit;
+ cons_data->console.index = rm_port->index;
+ cons_data->console.data = rm_port;
+ register_console(&cons_data->console);
+
+ ret = gh_rm_get_vmid(&vmid);
+ if (!ret) {
+ rm_port = rsc_mgr_port_create(cons_data, vmid);
+ if (IS_ERR(rm_port))
+ dev_warn(&auxdev->dev, "Could not create loop-back console: %ld\n",
+ PTR_ERR(rm_port));
+ } else {
+ dev_warn(&auxdev->dev, "Failed to get this VM's VMID: %d. Not creating loop-back console\n",
+ ret);
+ }
+
+ return 0;
+err_unreg_notif:
+ gh_rm_unregister_notifier(&cons_data->rsc_mgr_notif);
+err_put_tty:
+ tty_driver_kref_put(cons_data->tty_driver);
+ return ret;
+}
+
+static void rsc_mgr_console_remove(struct auxiliary_device *auxdev)
+{
+ struct rm_cons_data *cons_data = dev_get_drvdata(&auxdev->dev);
+
+ unregister_console(&cons_data->console);
+ gh_rm_unregister_notifier(&cons_data->rsc_mgr_notif);
+ tty_driver_kref_put(cons_data->tty_driver);
+}
+
+static struct auxiliary_device_id rsc_mgr_console_ids[] = {
+ { .name = "gunyah_rsc_mgr.console" },
+ {}
+};
+MODULE_DEVICE_TABLE(auxiliary, rsc_mgr_console_ids);
+
+static struct auxiliary_driver rsc_mgr_console_drv = {
+ .probe = rsc_mgr_console_probe,
+ .remove = rsc_mgr_console_remove,
+ .id_table = rsc_mgr_console_ids,
+};
+module_auxiliary_driver(rsc_mgr_console_drv);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Gunyah Console");
--
2.25.1
next prev parent reply other threads:[~2022-09-28 19:58 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-28 19:56 [PATCH v4 00/14] Drivers for gunyah hypervisor Elliot Berman
2022-09-28 19:56 ` [PATCH v4 01/14] docs: gunyah: Introduce Gunyah Hypervisor Elliot Berman
2022-09-29 3:43 ` Bagas Sanjaya
2022-09-29 4:02 ` Elliot Berman
2022-09-28 19:56 ` [PATCH v4 02/14] dt-bindings: Add binding for gunyah hypervisor Elliot Berman
2022-09-28 19:56 ` [PATCH v4 03/14] gunyah: Common types and error codes for Gunyah hypercalls Elliot Berman
2022-09-28 19:56 ` [PATCH v4 04/14] arm64: smccc: Include alternative-macros.h Elliot Berman
2022-09-28 19:56 ` [PATCH v4 05/14] virt: gunyah: Add hypercalls to identify Gunyah Elliot Berman
2022-09-28 19:56 ` [PATCH v4 06/14] virt: gunyah: Add sysfs nodes Elliot Berman
2022-09-30 12:09 ` Greg Kroah-Hartman
2022-10-04 23:50 ` Elliot Berman
2022-10-05 6:23 ` Greg Kroah-Hartman
2022-09-28 19:56 ` [PATCH v4 07/14] mailbox: Allow direct registration to a channel Elliot Berman
2022-09-28 19:56 ` [PATCH v4 08/14] virt: gunyah: msgq: Add hypercalls to send and receive messages Elliot Berman
2022-09-28 19:56 ` [PATCH v4 09/14] mailbox: Add Gunyah message queue mailbox Elliot Berman
2022-09-29 16:59 ` Bjorn Andersson
2022-09-29 17:37 ` Jassi Brar
2022-09-28 19:56 ` [PATCH v4 10/14] gunyah: sysfs: Add node to describe supported features Elliot Berman
2022-09-29 7:36 ` Joe Perches
2022-09-29 20:47 ` Elliot Berman
2022-10-02 23:30 ` Jeff Johnson
2022-10-02 23:58 ` Joe Perches
2022-09-30 12:06 ` Greg Kroah-Hartman
2022-10-04 23:53 ` Elliot Berman
2022-09-28 19:56 ` [PATCH v4 11/14] gunyah: rsc_mgr: Add resource manager RPC core Elliot Berman
2022-09-28 19:56 ` [PATCH v4 12/14] gunyah: rsc_mgr: Add RPC for console services Elliot Berman
2022-09-30 12:22 ` Greg Kroah-Hartman
2022-10-03 1:46 ` new checkpatch flexible array test ? (was Re: [PATCH v4 12/14] gunyah: rsc_mgr: Add RPC for console services) Joe Perches
2022-10-03 5:29 ` Greg Kroah-Hartman
2022-10-03 5:38 ` Joe Perches
2022-10-31 18:23 ` Gustavo A. R. Silva
2022-09-28 19:56 ` [PATCH v4 13/14] gunyah: rsc_mgr: Add auxiliary devices for console Elliot Berman
2022-09-30 12:19 ` Greg Kroah-Hartman
2022-10-04 23:49 ` Elliot Berman
2022-10-05 6:21 ` Greg Kroah-Hartman
2022-10-05 21:47 ` Elliot Berman
2022-10-06 6:28 ` Greg Kroah-Hartman
2022-09-28 19:56 ` Elliot Berman [this message]
2022-09-30 12:17 ` [PATCH v4 14/14] tty: gunyah: Add tty console driver for RM Console Services Greg Kroah-Hartman
2022-10-07 5:59 ` Elliot Berman
2022-10-07 7:40 ` Greg Kroah-Hartman
2022-10-09 20:59 ` Elliot Berman
2022-10-10 20:23 ` Greg Kroah-Hartman
2022-10-10 20:58 ` Elliot Berman
2022-10-11 6:22 ` Greg Kroah-Hartman
2022-10-11 22:04 ` Elliot Berman
2022-10-12 6:53 ` Greg Kroah-Hartman
2022-10-08 7:41 ` Zhou Furong
2022-10-08 9:52 ` Greg Kroah-Hartman
2022-10-03 7:01 ` Jiri Slaby
2022-10-10 18:06 ` Elliot Berman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220928195633.2348848-15-quic_eberman@quicinc.com \
--to=quic_eberman@quicinc.com \
--cc=agross@kernel.org \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=jassisinghbrar@gmail.com \
--cc=jirislaby@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=quic_bjorande@quicinc.com \
--cc=quic_cvanscha@quicinc.com \
--cc=quic_mnalajal@quicinc.com \
--cc=quic_svaddagi@quicinc.com \
--cc=quic_tsoni@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=sudeep.holla@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).