linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: MD Danish Anwar <danishanwar@ti.com>
To: Dan Carpenter <dan.carpenter@linaro.org>,
	Jan Kiszka <jan.kiszka@siemens.com>, Andrew Lunn <andrew@lunn.ch>,
	Simon Horman <horms@kernel.org>,
	Niklas Schnelle <schnelle@linux.ibm.com>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Arnd Bergmann <arnd@arndb.de>, Diogo Ivo <diogo.ivo@siemens.com>,
	Vladimir Oltean <vladimir.oltean@nxp.com>,
	Roger Quadros <rogerq@kernel.org>,
	MD Danish Anwar <danishanwar@ti.com>,
	Paolo Abeni <pabeni@redhat.com>, Jakub Kicinski <kuba@kernel.org>,
	Eric Dumazet <edumazet@google.com>,
	"David S. Miller" <davem@davemloft.net>
Cc: <linux-arm-kernel@lists.infradead.org>, <netdev@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <srk@ti.com>,
	Vignesh Raghavendra <vigneshr@ti.com>, <r-gunasekaran@ti.com>
Subject: [RFC PATCH net-next v4 1/3] net: ti: icssg-prueth: Add helper functions to configure FDB
Date: Wed, 15 May 2024 11:33:18 +0530	[thread overview]
Message-ID: <20240515060320.2783244-2-danishanwar@ti.com> (raw)
In-Reply-To: <20240515060320.2783244-1-danishanwar@ti.com>

Introduce helper functions to configure firmware FDB tables, VLAN tables
and Port VLAN ID settings to aid adding Switch mode support.

Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
 drivers/net/ethernet/ti/icssg/icssg_config.c | 170 +++++++++++++++++++
 drivers/net/ethernet/ti/icssg/icssg_config.h |  19 +++
 drivers/net/ethernet/ti/icssg/icssg_prueth.h |  12 ++
 3 files changed, 201 insertions(+)

diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.c b/drivers/net/ethernet/ti/icssg/icssg_config.c
index 15f2235bf90f..2213374d4d45 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_config.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_config.c
@@ -477,3 +477,173 @@ void icssg_config_set_speed(struct prueth_emac *emac)
 
 	writeb(fw_speed, emac->dram.va + PORT_LINK_SPEED_OFFSET);
 }
+
+int icssg_send_fdb_msg(struct prueth_emac *emac, struct mgmt_cmd *cmd,
+		       struct mgmt_cmd_rsp *rsp)
+{
+	struct prueth *prueth = emac->prueth;
+	int slice = prueth_emac_slice(emac);
+	int addr, ret;
+
+	addr = icssg_queue_pop(prueth, slice == 0 ?
+			       ICSSG_CMD_POP_SLICE0 : ICSSG_CMD_POP_SLICE1);
+	if (addr < 0)
+		return addr;
+
+	/* First 4 bytes have FW owned buffer linking info which should
+	 * not be touched
+	 */
+	memcpy_toio(prueth->shram.va + addr + 4, cmd, sizeof(*cmd));
+	icssg_queue_push(prueth, slice == 0 ?
+			 ICSSG_CMD_PUSH_SLICE0 : ICSSG_CMD_PUSH_SLICE1, addr);
+	ret = read_poll_timeout(icssg_queue_pop, addr, addr >= 0,
+				2000, 20000000, false, prueth, slice == 0 ?
+				ICSSG_RSP_POP_SLICE0 : ICSSG_RSP_POP_SLICE1);
+	if (ret) {
+		netdev_err(emac->ndev, "Timedout sending HWQ message\n");
+		return ret;
+	}
+
+	memcpy_fromio(rsp, prueth->shram.va + addr, sizeof(*rsp));
+	/* Return buffer back for to pool */
+	icssg_queue_push(prueth, slice == 0 ?
+			 ICSSG_RSP_PUSH_SLICE0 : ICSSG_RSP_PUSH_SLICE1, addr);
+
+	return 0;
+}
+
+static void icssg_fdb_setup(struct prueth_emac *emac, struct mgmt_cmd *fdb_cmd,
+			    const unsigned char *addr, u8 fid, int cmd)
+{
+	int slice = prueth_emac_slice(emac);
+	u8 mac_fid[ETH_ALEN + 2];
+	u16 fdb_slot;
+
+	ether_addr_copy(mac_fid, addr);
+
+	/* 1-1 VID-FID mapping is already setup */
+	mac_fid[ETH_ALEN] = fid;
+	mac_fid[ETH_ALEN + 1] = 0;
+
+	fdb_slot = bitrev32(crc32_le(0, mac_fid, 8)) & PRUETH_SWITCH_FDB_MASK;
+
+	fdb_cmd->header = ICSSG_FW_MGMT_CMD_HEADER;
+	fdb_cmd->type   = ICSSG_FW_MGMT_FDB_CMD_TYPE;
+	fdb_cmd->seqnum = ++(emac->prueth->icssg_hwcmdseq);
+	fdb_cmd->param  = cmd;
+	fdb_cmd->param |= (slice << 4);
+
+	memcpy(&fdb_cmd->cmd_args[0], addr, 4);
+	memcpy(&fdb_cmd->cmd_args[1], &addr[4], 2);
+	fdb_cmd->cmd_args[2] = fdb_slot;
+
+	netdev_dbg(emac->ndev, "MAC %pM slot %X FID %X\n", addr, fdb_slot, fid);
+}
+
+int icssg_fdb_add_del(struct prueth_emac *emac, const unsigned char *addr,
+		      u8 vid, u8 fid_c2, bool add)
+{
+	struct mgmt_cmd_rsp fdb_cmd_rsp = { 0 };
+	struct mgmt_cmd fdb_cmd = { 0 };
+	u8 fid = vid;
+	int ret;
+
+	icssg_fdb_setup(emac, &fdb_cmd, addr, fid, add ? ICSS_CMD_ADD_FDB : ICSS_CMD_DEL_FDB);
+
+	fid_c2 |= ICSSG_FDB_ENTRY_VALID;
+	fdb_cmd.cmd_args[1] |= ((fid << 16) | (fid_c2 << 24));
+
+	ret = icssg_send_fdb_msg(emac, &fdb_cmd, &fdb_cmd_rsp);
+	if (ret)
+		return ret;
+
+	WARN_ON(fdb_cmd.seqnum != fdb_cmd_rsp.seqnum);
+	if (fdb_cmd_rsp.status == 1)
+		return 0;
+
+	return -EINVAL;
+}
+
+int icssg_fdb_lookup(struct prueth_emac *emac, const unsigned char *addr,
+		     u8 vid)
+{
+	struct mgmt_cmd_rsp fdb_cmd_rsp = { 0 };
+	struct mgmt_cmd fdb_cmd = { 0 };
+	struct prueth_fdb_slot *slot;
+	u8 fid = vid;
+	int ret, i;
+
+	icssg_fdb_setup(emac, &fdb_cmd, addr, fid, ICSS_CMD_GET_FDB_SLOT);
+
+	fdb_cmd.cmd_args[1] |= fid << 16;
+
+	ret = icssg_send_fdb_msg(emac, &fdb_cmd, &fdb_cmd_rsp);
+	if (ret)
+		return ret;
+
+	WARN_ON(fdb_cmd.seqnum != fdb_cmd_rsp.seqnum);
+
+	slot = (struct prueth_fdb_slot __force *)(emac->dram.va + FDB_CMD_BUFFER);
+	for (i = 0; i < 4; i++) {
+		if (ether_addr_equal(addr, slot->mac) && vid == slot->fid)
+			return (slot->fid_c2 & ~ICSSG_FDB_ENTRY_VALID);
+		slot++;
+	}
+
+	return 0;
+}
+
+void icssg_vtbl_modify(struct prueth_emac *emac, u8 vid, u8 port_mask,
+		       u8 untag_mask, bool add)
+{
+	struct prueth *prueth = emac->prueth;
+	struct prueth_vlan_tbl *tbl;
+	u8 fid_c1;
+
+	tbl = prueth->vlan_tbl;
+	fid_c1 = tbl[vid].fid_c1;
+
+	/* FID_C1: bit0..2 port membership mask,
+	 * bit3..5 tagging mask for each port
+	 * bit6 Stream VID (not handled currently)
+	 * bit7 MC flood (not handled currently)
+	 */
+	if (add) {
+		fid_c1 |= (port_mask | port_mask << 3);
+		fid_c1 &= ~(untag_mask << 3);
+	} else {
+		fid_c1 &= ~(port_mask | port_mask << 3);
+	}
+
+	tbl[vid].fid_c1 = fid_c1;
+}
+
+u16 icssg_get_pvid(struct prueth_emac *emac)
+{
+	struct prueth *prueth = emac->prueth;
+	u32 pvid;
+
+	if (emac->port_id == PRUETH_PORT_MII0)
+		pvid = readl(prueth->shram.va + EMAC_ICSSG_SWITCH_PORT1_DEFAULT_VLAN_OFFSET);
+	else
+		pvid = readl(prueth->shram.va + EMAC_ICSSG_SWITCH_PORT2_DEFAULT_VLAN_OFFSET);
+
+	pvid = pvid >> 24;
+
+	return pvid;
+}
+
+void icssg_set_pvid(struct prueth *prueth, u8 vid, u8 port)
+{
+	u32 pvid;
+
+	/* only 256 VLANs are supported */
+	pvid = (u32 __force)cpu_to_be32((ETH_P_8021Q << 16) | (vid & 0xff));
+
+	if (port == PRUETH_PORT_MII0)
+		writel(pvid, prueth->shram.va + EMAC_ICSSG_SWITCH_PORT1_DEFAULT_VLAN_OFFSET);
+	else if (port == PRUETH_PORT_MII1)
+		writel(pvid, prueth->shram.va + EMAC_ICSSG_SWITCH_PORT2_DEFAULT_VLAN_OFFSET);
+	else
+		writel(pvid, prueth->shram.va + EMAC_ICSSG_SWITCH_PORT0_DEFAULT_VLAN_OFFSET);
+}
diff --git a/drivers/net/ethernet/ti/icssg/icssg_config.h b/drivers/net/ethernet/ti/icssg/icssg_config.h
index cf2ea4bd22a2..9d8558bd0f15 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_config.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_config.h
@@ -35,6 +35,8 @@ struct icssg_flow_cfg {
 	(2 * (PRUETH_EMAC_BUF_POOL_SIZE * PRUETH_NUM_BUF_POOLS + \
 	 PRUETH_EMAC_RX_CTX_BUF_SIZE * 2))
 
+#define PRUETH_SWITCH_FDB_MASK ((SIZE_OF_FDB / NUMBER_OF_FDB_BUCKET_ENTRIES) - 1)
+
 struct icssg_rxq_ctx {
 	__le32 start[3];
 	__le32 end;
@@ -202,6 +204,23 @@ struct icssg_setclock_desc {
 #define ICSSG_TS_PUSH_SLICE0	40
 #define ICSSG_TS_PUSH_SLICE1	41
 
+struct mgmt_cmd {
+	u8 param;
+	u8 seqnum;
+	u8 type;
+	u8 header;
+	u32 cmd_args[3];
+} __packed;
+
+struct mgmt_cmd_rsp {
+	u32 reserved;
+	u8 status;
+	u8 seqnum;
+	u8 type;
+	u8 header;
+	u32 cmd_args[3];
+} __packed;
+
 /* FDB FID_C2 flag definitions */
 /* Indicates host port membership.*/
 #define ICSSG_FDB_ENTRY_P0_MEMBERSHIP         BIT(0)
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.h b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
index 82e38ef5635b..b1c6a034b682 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.h
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.h
@@ -223,6 +223,7 @@ struct icssg_firmwares {
  * @emacs_initialized: num of EMACs/ext ports that are up/running
  * @iep0: pointer to IEP0 device
  * @iep1: pointer to IEP1 device
+ * @vlan_tbl: VLAN-FID table pointer
  */
 struct prueth {
 	struct device *dev;
@@ -247,6 +248,7 @@ struct prueth {
 	int emacs_initialized;
 	struct icss_iep *iep0;
 	struct icss_iep *iep1;
+	struct prueth_vlan_tbl *vlan_tbl;
 };
 
 struct emac_tx_ts_response {
@@ -304,6 +306,16 @@ int icssg_queue_pop(struct prueth *prueth, u8 queue);
 void icssg_queue_push(struct prueth *prueth, int queue, u16 addr);
 u32 icssg_queue_level(struct prueth *prueth, int queue);
 
+int icssg_send_fdb_msg(struct prueth_emac *emac, struct mgmt_cmd *cmd,
+		       struct mgmt_cmd_rsp *rsp);
+int icssg_fdb_add_del(struct prueth_emac *emac,  const unsigned char *addr,
+		      u8 vid, u8 fid_c2, bool add);
+int icssg_fdb_lookup(struct prueth_emac *emac, const unsigned char *addr,
+		     u8 vid);
+void icssg_vtbl_modify(struct prueth_emac *emac, u8 vid, u8 port_mask,
+		       u8 untag_mask, bool add);
+u16 icssg_get_pvid(struct prueth_emac *emac);
+void icssg_set_pvid(struct prueth *prueth, u8 vid, u8 port);
 #define prueth_napi_to_tx_chn(pnapi) \
 	container_of(pnapi, struct prueth_tx_chn, napi_tx)
 
-- 
2.34.1


  reply	other threads:[~2024-05-15  6:04 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-15  6:03 [RFC PATCH net-next v4 0/3] Introduce switch mode support for ICSSG driver MD Danish Anwar
2024-05-15  6:03 ` MD Danish Anwar [this message]
2024-05-15  6:03 ` [RFC PATCH net-next v4 2/3] net: ti: icssg-switch: Add switchdev based driver for ethernet switch support MD Danish Anwar
2024-05-15  6:03 ` [RFC PATCH net-next v4 3/3] net: ti: icssg-prueth: Add support for ICSSG switch firmware MD Danish Anwar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240515060320.2783244-2-danishanwar@ti.com \
    --to=danishanwar@ti.com \
    --cc=andrew@lunn.ch \
    --cc=arnd@arndb.de \
    --cc=dan.carpenter@linaro.org \
    --cc=davem@davemloft.net \
    --cc=diogo.ivo@siemens.com \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=jan.kiszka@siemens.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=r-gunasekaran@ti.com \
    --cc=rogerq@kernel.org \
    --cc=schnelle@linux.ibm.com \
    --cc=srk@ti.com \
    --cc=vigneshr@ti.com \
    --cc=vladimir.oltean@nxp.com \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).