linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Wahren <stefan.wahren@i2se.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Eric Anholt <eric@anholt.net>,
	linux-rpi-kernel@lists.infradead.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 00/29] staging: bcm2835-audio: Cleanups and fixes
Date: Sat, 8 Sep 2018 15:18:10 +0200 (CEST)	[thread overview]
Message-ID: <2050605805.39126.1536412690563@email.1und1.de> (raw)
In-Reply-To: <20180904155858.8001-1-tiwai@suse.de>

Hi Takashi,

> Takashi Iwai <tiwai@suse.de> hat am 4. September 2018 um 17:58 geschrieben:
> 
> 
> Hi,
> 
> since I had an opportunity to play with RPi3B+ recently, I took a look
> at the existing bcm2835-audio driver code and was amused very much :)
> 
> So here is the result, a cleanup and fix patch series.
> 
> Most of the patches are trivial cleanups, just brushing up, removing
> many redundant and buggy codes, as well as code simplifications.
> 
> A big functional change is that now it uses non-atomic PCM ops, so
> that we can kill the ugly workqueue usages.  Also, the resource
> management was simplified.

first of all, thank you very much for this series.

Eric has no time as maintainer, so i will try to give you some feedback (beware of very little audio driver knowledge).

I functionally tested your patch series on a Raspberry Pi 1 B (bcm2835_defconfig), so this whole series is at least:

Tested-by: Stefan Wahren <stefan.wahren@i2se.com>

Unfortunately there is still an corruption issue with underlying vchiq and multi_v7_defconfig, so no wider tests.

I don't know if you tested this series on a Raspberry Pi. Maybe you have some specific scenarios, which should be tested.

As a reviewer i have some suggestions, but only trivia. I don't know if it's a problem that this series hasn't been send to devel@driverdev.osuosl.org

Stefan

  parent reply	other threads:[~2018-09-08 13:18 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-04 15:58 [PATCH 00/29] staging: bcm2835-audio: Cleanups and fixes Takashi Iwai
2018-09-04 15:58 ` [PATCH 01/29] staging: bcm2835-audio: Clean up mutex locks Takashi Iwai
2018-09-04 15:58 ` [PATCH 02/29] staging: bcm2835-audio: Remove redundant spdif stream ctls Takashi Iwai
2018-09-04 15:58 ` [PATCH 03/29] staging: bcm2835-audio: Clean up include files in bcm2835-ctl.c Takashi Iwai
2018-09-08 13:25   ` Stefan Wahren
2018-09-08 16:21     ` Takashi Iwai
2018-09-04 15:58 ` [PATCH 04/29] staging: bcm2835-audio: Remove redundant substream mask checks Takashi Iwai
2018-09-04 15:58 ` [PATCH 05/29] staging: bcm2835-audio: Fix mute controls, volume handling cleanup Takashi Iwai
2018-09-04 15:58 ` [PATCH 06/29] staging: bcm2835-audio: Remove redundant function calls Takashi Iwai
2018-09-04 15:58 ` [PATCH 07/29] staging: bcm2835-audio: Remove superfluous open flag Takashi Iwai
2018-09-04 15:58 ` [PATCH 08/29] staging: bcm2835-audio: Drop useless running flag and check Takashi Iwai
2018-09-04 15:58 ` [PATCH 09/29] staging: bcm2835-audio: Fix incorrect draining handling Takashi Iwai
2018-09-04 15:58 ` [PATCH 10/29] staging: bcm2835-audio: Kill unused spinlock Takashi Iwai
2018-09-04 15:58 ` [PATCH 11/29] staging: bcm2835-audio: Use PCM runtime values instead Takashi Iwai
2018-09-04 15:58 ` [PATCH 12/29] staging: bcm2835-audio: Drop unnecessary pcm indirect setup Takashi Iwai
2018-09-04 15:58 ` [PATCH 13/29] staging: bcm2835-audio: Drop useless NULL check Takashi Iwai
2018-09-04 15:58 ` [PATCH 14/29] staging: bcm2835-audio: Propagate parameter setup error Takashi Iwai
2018-09-04 15:58 ` [PATCH 15/29] staging: bcm2835-audio: Drop debug messages in bcm2835-pcm.c Takashi Iwai
2018-09-04 15:58 ` [PATCH 16/29] staging: bcm2835-audio: Drop superfluous mutex lock during prepare Takashi Iwai
2018-09-08 13:40   ` Stefan Wahren
2018-09-08 16:12     ` Takashi Iwai
2018-09-04 15:58 ` [PATCH 17/29] staging: bcm2835-audio: Add 10ms period constraint Takashi Iwai
2018-09-19  9:42   ` Stefan Wahren
2018-09-19  9:52     ` Takashi Iwai
2018-09-19 12:41       ` Stefan Wahren
2018-09-19 12:47         ` Mike Brady
2018-09-19 18:39         ` Takashi Iwai
2018-10-09 13:18           ` [PATCH 17/29] staging: bcm2835-audio: Add 10ms period constraint [Resend in plain text...] Mike Brady
2018-10-09 13:44             ` Takashi Iwai
2018-10-09 15:28               ` Mike Brady
2018-10-09 15:32                 ` Takashi Iwai
2018-10-11 12:53                 ` Mike Brady
2018-10-11 14:07                   ` Stefan Wahren
2018-10-13 15:00                   ` Mike Brady
2018-10-13 15:45                     ` Takashi Iwai
2018-09-04 15:58 ` [PATCH 18/29] staging: bcm2835-audio: Make single vchi handle Takashi Iwai
2018-09-04 15:58 ` [PATCH 19/29] staging: bcm2835-audio: Code refactoring of vchiq accessor codes Takashi Iwai
2018-09-04 15:58 ` [PATCH 20/29] staging: bcm2835-audio: Operate non-atomic PCM ops Takashi Iwai
2018-09-04 15:58 ` [PATCH 21/29] staging: bcm2835-audio: Use card->private_data Takashi Iwai
2018-09-04 15:58 ` [PATCH 22/29] staging: bcm2835-audio: Use standard error print helpers Takashi Iwai
2018-09-04 15:58 ` [PATCH 23/29] staging: bcm2835-audio: Remove unnecessary header file includes Takashi Iwai
2018-09-04 15:58 ` [PATCH 24/29] staging: bcm2835-audio: Move module parameter description Takashi Iwai
2018-09-04 15:58 ` [PATCH 25/29] staging: bcm2835-audio: Use coherent device buffers Takashi Iwai
2018-09-04 15:58 ` [PATCH 26/29] staging: bcm2835-audio: Set SNDRV_PCM_INFO_SYNC_APPLPTR Takashi Iwai
2018-09-04 15:58 ` [PATCH 27/29] staging: bcm2835-audio: Simplify PCM creation helpers Takashi Iwai
2018-09-04 15:58 ` [PATCH 28/29] staging: bcm2835-audio: Simplify kctl " Takashi Iwai
2018-09-04 15:58 ` [PATCH 29/29] staging: bcm2835-audio: Simplify card object management Takashi Iwai
2018-09-08 13:18 ` Stefan Wahren [this message]
2018-09-08 16:21   ` [PATCH 00/29] staging: bcm2835-audio: Cleanups and fixes Takashi Iwai
2018-09-08 17:00     ` Stefan Wahren
2018-09-08 17:16       ` Takashi Iwai
2018-09-10  9:12     ` Greg Kroah-Hartman
2018-09-10  9:16       ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2050605805.39126.1536412690563@email.1und1.de \
    --to=stefan.wahren@i2se.com \
    --cc=eric@anholt.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).