linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Agner <stefan@agner.ch>
To: Nathan Chancellor <natechancellor@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>,
	Ard Biesheuvel <ard.biesheuvel@linaro.org>,
	Jonathan Corbet <corbet@lwn.net>,
	linux-doc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Tri Vo <trong@android.com>,
	Nicolas Pitre <nicolas.pitre@linaro.org>,
	Nick Desaulniers <ndesaulniers@google.com>,
	Nicolas Pitre <nico@linaro.org>
Subject: Re: [PATCH RESEND] ARM: Ensure that NEON code always compiles with Clang
Date: Sat, 26 Jan 2019 17:48:33 +0100	[thread overview]
Message-ID: <20e649cde3fadfa63d7ae9fefbda4915@agner.ch> (raw)
In-Reply-To: <20190126040111.9013-1-natechancellor@gmail.com>

On 26.01.2019 05:01, Nathan Chancellor wrote:
> While building arm32 allyesconfig, I ran into the following errors:
> 
>   arch/arm/lib/xor-neon.c:17:2: error: You should compile this file with
>   '-mfloat-abi=softfp -mfpu=neon'
> 
>   In file included from lib/raid6/neon1.c:27:
>   /home/nathan/cbl/prebuilt/lib/clang/8.0.0/include/arm_neon.h:28:2:
>   error: "NEON support not enabled"
> 
> Building V=1 showed NEON_FLAGS getting passed along to Clang but
> __ARM_NEON__ was not getting defined. Ultimately, it boils down to Clang
> only defining __ARM_NEON__ when targeting armv7, rather than armv6k,
> which is the '-march' value for allyesconfig.
> 
>>From lib/Basic/Targets/ARM.cpp in the Clang source:
> 
>   // This only gets set when Neon instructions are actually available, unlike
>   // the VFP define, hence the soft float and arch check. This is subtly
>   // different from gcc, we follow the intent which was that it should be set
>   // when Neon instructions are actually available.
>   if ((FPU & NeonFPU) && !SoftFloat && ArchVersion >= 7) {
>     Builder.defineMacro("__ARM_NEON", "1");
>     Builder.defineMacro("__ARM_NEON__");
>     // current AArch32 NEON implementations do not support double-precision
>     // floating-point even when it is present in VFP.
>     Builder.defineMacro("__ARM_NEON_FP",
>                         "0x" + Twine::utohexstr(HW_FP & ~HW_FP_DP));
>   }
> 
> Ard Biesheuvel recommended explicitly adding '-march=armv7-a' at the
> beginning of the NEON_FLAGS definitions so that __ARM_NEON__ always gets
> definined by Clang. This doesn't functionally change anything because
> that code will only run where NEON is supported, which is implicitly
> armv7.
> 
> Link: https://github.com/ClangBuiltLinux/linux/issues/287
> Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
> Acked-by: Nicolas Pitre <nico@linaro.org>
> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
> ---
> 
> Resending with Nicolas's ack and Nick's review, to give others a chance
> to pitch in with review/testing before submitting it to the patch
> system (specifically Stefan, sorry I should have included you in the
> previous posting).

No worries.

Looks good to me.

Reviewed-by: Stefan Agner <stefan@agner.ch>

--
Stefan

> 
> With this patch and:
> * A tip of tree LLVM build (I used apt.llvm.org)
> * Clang GCOV support:
> https://lore.kernel.org/lkml/20190122233749.42220-1-trong@android.com/
> * Two minor hacks for unrelated issues that are still being worked through:
>   *
> https://raw.githubusercontent.com/nathanchance/patches/c313b2fa0efb/linux/build-hax/0003-DO-NOT-UPSTREAM-ARM-Don-t-select-HAVE_FUNCTION_TRACE.patch
> (see https://github.com/ClangBuiltLinux/linux/issues/35)
>   *
> https://gist.githubusercontent.com/nathanchance/b2f5a4015abade1a41e78d5fc3235c5b/raw/744321882ab05511331f26896bad7c9f0056a6a5/gistfile1.txt
> (see https://github.com/ClangBuiltLinux/linux/issues/325)
> 
> I can build and link a little endian allyesconfig ARM kernel. This
> patch alone works with GCC 8.2.0 and binutils 2.31.1.
> 
>  Documentation/arm/kernel_mode_neon.txt | 4 ++--
>  arch/arm/lib/Makefile                  | 2 +-
>  arch/arm/lib/xor-neon.c                | 2 +-
>  lib/raid6/Makefile                     | 2 +-
>  4 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/arm/kernel_mode_neon.txt
> b/Documentation/arm/kernel_mode_neon.txt
> index 525452726d31..b9e060c5b61e 100644
> --- a/Documentation/arm/kernel_mode_neon.txt
> +++ b/Documentation/arm/kernel_mode_neon.txt
> @@ -6,7 +6,7 @@ TL;DR summary
>  * Use only NEON instructions, or VFP instructions that don't rely on support
>    code
>  * Isolate your NEON code in a separate compilation unit, and compile it with
> -  '-mfpu=neon -mfloat-abi=softfp'
> +  '-march=armv7-a -mfpu=neon -mfloat-abi=softfp'
>  * Put kernel_neon_begin() and kernel_neon_end() calls around the
> calls into your
>    NEON code
>  * Don't sleep in your NEON code, and be aware that it will be executed with
> @@ -87,7 +87,7 @@ instructions appearing in unexpected places if no
> special care is taken.
>  Therefore, the recommended and only supported way of using NEON/VFP in the
>  kernel is by adhering to the following rules:
>  * isolate the NEON code in a separate compilation unit and compile it with
> -  '-mfpu=neon -mfloat-abi=softfp';
> +  '-march=armv7-a -mfpu=neon -mfloat-abi=softfp';
>  * issue the calls to kernel_neon_begin(), kernel_neon_end() as well
> as the calls
>    into the unit containing the NEON code from a compilation unit which is *not*
>    built with the GCC flag '-mfpu=neon' set.
> diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
> index ad25fd1872c7..0bff0176db2c 100644
> --- a/arch/arm/lib/Makefile
> +++ b/arch/arm/lib/Makefile
> @@ -39,7 +39,7 @@ $(obj)/csumpartialcopy.o:	$(obj)/csumpartialcopygeneric.S
>  $(obj)/csumpartialcopyuser.o:	$(obj)/csumpartialcopygeneric.S
>  
>  ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
> -  NEON_FLAGS			:= -mfloat-abi=softfp -mfpu=neon
> +  NEON_FLAGS			:= -march=armv7-a -mfloat-abi=softfp -mfpu=neon
>    CFLAGS_xor-neon.o		+= $(NEON_FLAGS)
>    obj-$(CONFIG_XOR_BLOCKS)	+= xor-neon.o
>  endif
> diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c
> index 2c40aeab3eaa..c691b901092f 100644
> --- a/arch/arm/lib/xor-neon.c
> +++ b/arch/arm/lib/xor-neon.c
> @@ -14,7 +14,7 @@
>  MODULE_LICENSE("GPL");
>  
>  #ifndef __ARM_NEON__
> -#error You should compile this file with '-mfloat-abi=softfp -mfpu=neon'
> +#error You should compile this file with '-march=armv7-a
> -mfloat-abi=softfp -mfpu=neon'
>  #endif
>  
>  /*
> diff --git a/lib/raid6/Makefile b/lib/raid6/Makefile
> index 4e90d443d1b0..e723eacf7868 100644
> --- a/lib/raid6/Makefile
> +++ b/lib/raid6/Makefile
> @@ -39,7 +39,7 @@ endif
>  ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
>  NEON_FLAGS := -ffreestanding
>  ifeq ($(ARCH),arm)
> -NEON_FLAGS += -mfloat-abi=softfp -mfpu=neon
> +NEON_FLAGS += -march=armv7-a -mfloat-abi=softfp -mfpu=neon
>  endif
>  CFLAGS_recov_neon_inner.o += $(NEON_FLAGS)
>  ifeq ($(ARCH),arm64)

  reply	other threads:[~2019-01-26 16:49 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-15 21:23 [PATCH] ARM: Ensure that NEON code always compiles with Clang Nathan Chancellor
2018-12-17 18:23 ` Nicolas Pitre
2018-12-17 19:34   ` Nathan Chancellor
2018-12-21 18:11 ` Nick Desaulniers
2019-01-26  4:01 ` [PATCH RESEND] " Nathan Chancellor
2019-01-26 16:48   ` Stefan Agner [this message]
2019-03-11 16:21 ` [PATCH] " Arnd Bergmann
2019-03-11 16:49   ` Ard Biesheuvel
2019-03-11 21:36     ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20e649cde3fadfa63d7ae9fefbda4915@agner.ch \
    --to=stefan@agner.ch \
    --cc=ard.biesheuvel@linaro.org \
    --cc=corbet@lwn.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=natechancellor@gmail.com \
    --cc=ndesaulniers@google.com \
    --cc=nico@linaro.org \
    --cc=nicolas.pitre@linaro.org \
    --cc=trong@android.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).