Re: [PATCH v2 7/7] arm64: dts: qcom: sm8250: add interconnect nodes

[Jonathan Marek <jonathan@marek.ca>]

On 7/24/20 10:13 AM, Sibi Sankar wrote:
> Hey Jonathan,
> 
> Thanks for the patch! Please use the
> suggested register space definitions
> instead.
> 

Thanks for the suggestions, I was unsure what to use for the sizes. The 
reg field is unused by the upstream driver so it is hard to figure out.

However, I'm not sure about some of your suggestions for the base 
address. For example, for "mc_virt" you suggest 0x0163d000, and I have 
0x09100000. In the downstream dts, "mc_virt-base" is 0x9100000 and 
qcom,base-offset for fab_mc_virt is 0. Do you have an explanation for 
why your suggestion is so different?

> On 2020-07-13 21:11, Jonathan Marek wrote:
>> Add the interconnect dts nodes for sm8250.
>>
>> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
>> ---
>>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 82 ++++++++++++++++++++++++++++
>>  1 file changed, 82 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi
>> b/arch/arm64/boot/dts/qcom/sm8250.dtsi
>> index 636e2196138c..dfc1b7fa7d85 100644
>> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
>> @@ -11,6 +11,7 @@
>>  #include <dt-bindings/power/qcom-aoss-qmp.h>
>>  #include <dt-bindings/power/qcom-rpmpd.h>
>>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> +#include <dt-bindings/interconnect/qcom,sm8250.h>
> 
> please fix ^^ sort order
> 
>>
>>  / {
>>      interrupt-parent = <&intc>;
>> @@ -978,6 +979,55 @@ spi13: spi@a94000 {
>>              };
>>          };
>>
>> +        config_noc: interconnect@1500000 {
>> +            compatible = "qcom,sm8250-config-noc";
>> +            reg = <0 0x01500000 0 0x1000>;
> 
> 0x01500000 0xa580
> 
>> +            #interconnect-cells = <1>;
>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>> +        };
>> +
>> +        ipa_virt: interconnect@1620000 {
>> +            compatible = "qcom,sm8250-ipa-virt";
>> +            reg = <0 0x01620000 0 0x1000>;
> 
> 0x01e00000 0x1000
> 
>> +            #interconnect-cells = <1>;
>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>> +        };
>> +
>> +        system_noc: interconnect@1632000 {
>> +            compatible = "qcom,sm8250-system-noc";
>> +            reg = <0 0x01632000 0 0x1000>;
> 
> 0x01620000 0x1C200
> 
>> +            #interconnect-cells = <1>;
>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>> +        };
>> +
>> +        aggre1_noc: interconnect@16e2000 {
>> +            compatible = "qcom,sm8250-aggre1-noc";
>> +            reg = <0 0x016e2000 0 0x1000>;
> 
> 0x016e0000 0x1f180
> 
>> +            #interconnect-cells = <1>;
>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>> +        };
>> +
>> +        aggre2_noc: interconnect@1703000 {
>> +            compatible = "qcom,sm8250-aggre2-noc";
>> +            reg = <0 0x01703000 0 0x1000>;
> 
> 0x01700000 0x33000
> 
>> +            #interconnect-cells = <1>;
>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>> +        };
>> +
>> +        compute_noc: interconnect@1733000 {
>> +            compatible = "qcom,sm8250-compute-noc";
>> +            reg = <0 0x01733000 0 0x1000>;
> 
> 0x01733000 0xd180
> 
>> +            #interconnect-cells = <1>;
>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>> +        };
>> +
>> +        mmss_noc: interconnect@174a000 {
>> +            compatible = "qcom,sm8250-mmss-noc";
>> +            reg = <0 0x0174a000 0 0x1000>;
> 
> 0x01740000 0x1f080
> 
>> +            #interconnect-cells = <1>;
>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>> +        };
>> +
>>          ufs_mem_hc: ufshc@1d84000 {
>>              compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
>>                       "jedec,ufs-2.0";
>> @@ -1364,6 +1414,34 @@ usb_2_ssphy: lane@88eb200 {
>>              };
>>          };
>>
>> +        dc_noc: interconnect@90c0000 {
>> +            compatible = "qcom,sm8250-dc-noc";
>> +            reg = <0 0x090c0000 0 0x1000>;
> 
> 0x090c0000 0x4200
> 
>> +            #interconnect-cells = <1>;
>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>> +        };
>> +
>> +        mc_virt: interconnect@9100000 {
>> +            compatible = "qcom,sm8250-mc-virt";
>> +            reg = <0 0x09100000 0 0x1000>;
> 
> 0x0163d000 0x1000
> 
>> +            #interconnect-cells = <1>;
>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>> +        };
>> +
>> +        gem_noc: interconnect@9121000 {
>> +            compatible = "qcom,sm8250-gem-noc";
>> +            reg = <0 0x09121000 0 0x1000>;
> 
> 0x09100000 0xb4000
> 
>> +            #interconnect-cells = <1>;
>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>> +        };
>> +
>> +        npu_noc: interconnect@9990000 {
>> +            compatible = "qcom,sm8250-npu-noc";
>> +            reg = <0 0x09990000 0 0x1000>;
> 
> 0x09990000 0x1600
> 
>> +            #interconnect-cells = <1>;
>> +            qcom,bcm-voters = <&apps_bcm_voter>;
>> +        };
>> +
>>          usb_1: usb@a6f8800 {
>>              compatible = "qcom,sm8250-dwc3", "qcom,dwc3";
>>              reg = <0 0x0a6f8800 0 0x400>;
>> @@ -2359,6 +2437,10 @@ rpmhpd_opp_turbo_l1: opp10 {
>>                      };
>>                  };
>>              };
>> +
>> +            apps_bcm_voter: bcm_voter {
>> +                compatible = "qcom,bcm-voter";
>> +            };
>>          };
>>      };
>