From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: agross@kernel.org, robh+dt@kernel.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, konrad.dybcio@somainline.org,
marijn.suijten@somainline.org, martin.botka@somainline.org,
~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, paul.bouchara@somainline.org
Subject: Re: [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform
Date: Thu, 9 Sep 2021 12:40:04 +0200 [thread overview]
Message-ID: <2e9270dd-759e-9ebf-71dd-a15fecd611ca@somainline.org> (raw)
In-Reply-To: <YTdjX2/XGZYQQRDW@ripper>
Il 07/09/21 15:04, Bjorn Andersson ha scritto:
> On Fri 03 Sep 11:09 PDT 2021, AngeloGioacchino Del Regno wrote:
>
>> This commit introduces support for the Sony Yoshino platform, using
>> the MSM8998 SoC, including:
>> - Sony Xperia XZ1 (codename Poplar),
>> - Sony Xperia XZ1 Compact (codename Lilac),
>> - Sony Xperia XZ Premium (codename Maple).
>>
>
> Nice!
>
>> diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
> [..]
>> + vph_pwr: vph-pwr-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vph_pwr";
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +
>> + gpio_keys {
>
> Please don't use '_' in node names.
>
Sorry, all of that is fixed.
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + hyp_mem: memory@85800000 {
>> + reg = <0x0 0x85800000 0x0 0x3700000>;
>> + no-map;
>> + };
>> +
>> + cont_splash_mem: cont-splash-region@9d400000 {
>
> Is there any reason for not just naming this "memory"?
>
No, there's no reason. Changed to 'memory'.
>> + compatible = "shared-dma-pool";
>> + reg = <0x0 0xf6400000 0x0 0x2000>;
>> + no-map;
>> + };
>> +
> [..]
>> +&rpm_requests {
>> + pm8998-regulators {
>> + compatible = "qcom,rpm-pm8998-regulators";
>> +
> [..]
>> + vreg_lvs1a_1p8: lvs1 { };
>> + vreg_lvs2a_1p8: lvs2 { };
>> +
>
> Blank line.
>
Done.
Also, we had a better internal review of the 8998 dt patches, so in the
next version there will be even more cleanups.
>> + };
>> +
>> + pmi8998-regulators {
>> + compatible = "qcom,rpm-pmi8998-regulators";
>> +
>> + vdd_bob-supply = <&vph_pwr>;
>> +
>> + vreg_bob: bob {
>> + regulator-min-microvolt = <3312000>;
>> + regulator-max-microvolt = <3600000>;
>> + };
>> + };
>> +};
>> +
>> +&sdhc2 {
>> + status = "okay";
>> + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
>> +
>> + vmmc-supply = <&vreg_l21a_2p95>;
>> + vqmmc-supply = <&vreg_l13a_2p95>;
>> +
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
>> + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
>
> How about grouping these various pins as "sdc2_default_state" and
> "sdc2_sleep_state"?
>
I agree with you on the fact that groping these pins would look way better,
but I'm inheriting the sdc2 pinctrl from msm8998.dtsi and... all of the msm8998
boards, including msm8998-mtp and msm8998-clamshell (and whatever else inherits
these) are doing the same as what I am doing here.
That said, are you proposing to change 'em all?
Cheers,
- Angelo
>> +};
>> +
> Regards,
> Bjorn
>
prev parent reply other threads:[~2021-09-09 10:40 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-03 18:09 [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 2/7] arm64: dts: qcom: msm8998-xperia: Add RMI4 touchscreen support AngeloGioacchino Del Regno
2021-09-07 13:41 ` Bjorn Andersson
2021-09-09 11:25 ` AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 3/7] arm64: dts: qcom: msm8998-xperia: Add support for wcn3990 Bluetooth AngeloGioacchino Del Regno
2021-09-07 13:42 ` Bjorn Andersson
2021-09-09 13:19 ` Dmitry Baryshkov
2021-09-09 18:03 ` AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 4/7] arm64: dts: qcom: msm8998-xperia: Add support for gpio vibrator AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 5/7] arm64: dts: qcom: msm8998-xperia: Configure display boost regulators AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 6/7] arm64: dts: qcom: msm8998-xperia: Add camera regulators AngeloGioacchino Del Regno
2021-09-03 18:09 ` [PATCH 7/7] arm64: dts: qcom: msm8998-xperia: Add audio clock and its pin AngeloGioacchino Del Regno
2021-09-07 13:47 ` Bjorn Andersson
2021-09-09 10:57 ` AngeloGioacchino Del Regno
2021-09-07 11:40 ` [PATCH 1/7] arm64: dts: qcom: Introduce support for MSM8998 Sony Yoshino platform kernel test robot
2021-09-07 13:04 ` Bjorn Andersson
2021-09-09 10:40 ` AngeloGioacchino Del Regno [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2e9270dd-759e-9ebf-71dd-a15fecd611ca@somainline.org \
--to=angelogioacchino.delregno@somainline.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=martin.botka@somainline.org \
--cc=paul.bouchara@somainline.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).